MEETOOT Camera Mount Accessory - A must-have adapter in your photo or video arsenal!! - video Dailymotion

Never Struggle With Camera Angles Again - MEETOOT Mount

Transcript

00:00Hello and welcome back to another exciting episode. Today we're gonna do

00:05another small but mighty unboxing. Now this is something that's going to make

00:11my videography, especially my unboxing stuff, quite a bit more efficient. And I'll

00:19get to that in a minute. In this unboxing we are going to be doing the

00:23Me Toot two-piece camera mount accessory. And this is pretty much all there is to

00:36it. I'm going to set it up. I'm going to show you how I use it. And I'm going to

00:42show you the efficiency just this little piece plus the melting bracket is gonna

00:53make in my production. So this, just so you are aware, is a metal. And it goes on a

01:08lot of my GoPro accessories. I don't have GoPro but I do have DJI action cameras

01:16that do have the same mount. And it's going to help me put quick release on all

01:25of my GoPro mounts. And this is how it's going to be done. Now on a previous video, I

01:39showed you the Fantasi mount. So if you want to see me unbox that and how I use it, go on

01:52and take a look at the other one. The previous video. But all you do is in order to

02:00make this work, you take out the mounting screw with the included Allen wrench. Which is

02:06kind of neat they do that, but I'm getting a whole lot of Allen wrenches.

02:10You just stick this on the bottom. Now this lock, okay, does move. So if you need this a

02:20certain way, the bottom part, you can just put it on and then tighten this down. For

02:26instance, I'm going to put this in. But let's say I wanted it mounted that way. I could

02:35just twist it but then tighten it up with this spacer and then it's on there pretty

02:44good. But for me, let's go ahead and see how tight we can make it just straight on in.

02:51That looks good. And then just unscrew this mount. This has a fluorescence. Take off the

03:12piece I add on here as an extension. Put this on to the GoPro mount. Now of course it's new so

03:27it's going to be a little tight and that's okay. Put that in there. And then we're going to put a base

03:43mount on, which I showed you one of those in a past video as well. And all I have to do is mount that

03:57right in. So now, when I go to do my videos, I have a quick mount. So I can now take it off of this,

04:07put it on one of my tripod, put it on one of my tripod if I have to, transfer it over to my Mantis pod,

04:17which again, I do have a video on that. And I can just use that. Or if I have to, I can also, because I

04:34have the Sparta bag with a PD mount. I can just mount that right on there. That is cool. So now,

04:47I don't have to wrestle with the GoPro mount. I can just do the quick releases and I am good to go.

04:56And that is it for the MeToot camera mount accessory. How I'm going to use it and how it has increased the

05:07efficiency of my studio. I hope that helped. And as always, have a great day.