00:00It's a crazy crappy afternoon, look at this, but this is my big lift and we got a big truck.
00:24Let's see what the vibration is, I got an idea it's in the driveline, let's take a look.
00:30Come my, come my way a little bit.
00:48Thing's heavy man, this is heavy metal, we're doing heavy metal work today.
00:57This is a four wheel drive truck, look at this front end.
00:59This is a serious four wheel drive, feels like a driveline vibration, whoop, right here
01:05it is, I can tell.
01:06Oh man, help me Tyson, my shoulders aren't tough enough, look at that, you can tell, we got
01:12a bad carrier bearing.
01:13We'll check the U-joints when we get it out, we'll have to pull the driveline out and replace
01:19this carrier bearing.
01:20Let's get on it.
01:26You want a pry bar?
01:27Pop that off.
01:28You ready?
01:29Going down.
01:30You ready?
01:31Yep.
01:32Nothing like the right tools.
01:38You know, you can't do heavy duty work if you ain't got tools for it.
01:45That is a serious transfer case, man.
01:49Look at the size of that dog.
01:51Wow.
01:52They still feel pretty dang good.
01:53You got to grease them though.
01:54Yeah.
01:55All right, you ready?
01:56I'll help you off with this driveline.
01:57All right, let's take it inside.
01:58All right, let's take it inside.
01:59All right, let's take it inside.
02:00All right.
02:01Let's take it inside.
02:02Let's take it down.
02:03Let's take it down.
02:04You ready?
02:05You ready?
02:06Yeah.
02:07Let's take it down.
02:08You ready?
02:09Oh, wow.
02:10Wow.
02:11They still feel pretty dang good.
02:12You got to grease them though.
02:13Yeah.
02:14All right, you ready?
02:15I'll help you off with this driveline.
02:16All right, let's take it inside.
02:32Yeah, it ain't coming off.
02:39Oh, this is going to take a while to heat this thing up.
02:45That's a lot of metal right there, man.
02:58Not budging, is it?
03:03Will it come off?
03:04Oh, there you go.
03:06Love it.
03:09OK, everyone.
03:10When you press it, he's going to finish a ball
03:26Your face comes down.
03:27You're good to get a bucket zone, you're tired of doing this.
03:31Okay, let's see what the heat looks like.
03:33Okay.
03:36get a nut on there we're gonna press press this bearing off sometimes you know you got to make
04:01things work and it's nice to have a big enough press to make that happen before i would press
04:06on this shaft here i'll put the nut down on it because then when i take the nut off if i boogered
04:12up the threads right here the nut will clean that off so that's what we're going to do right now
04:17we're going to add a nut to that now when i press on that if that gets boogered up i'll take that
04:26nut off you'll never know and here we go now remember this is important see how my bearing
04:32spreader is this way and my my bolts are not going to take the strain this big casting here is
04:39i've talked about it before there is a right and a wrong way this is the right way if i
04:44is to turn it this way and the bolts with this that would be wrong we were never pushing that
05:02off with a puller we lost five tons on it here almost and it ain't cracked it's gonna pop
05:14okay hit this side a little bit
05:28voila
05:39there lies the problem the beast okay let's get her done
05:44okay we're gonna use that yoke to press that down on there
05:59give me a second
06:14we're good
06:26we're good
06:28we're good
06:33See that, yeah, this is coming this way.
06:51Keep going, just go that way and we'll roll around in there.
07:02Okay, stop.
07:09Okay, he's got Loctite on him.
07:13You got any Loctite?
07:14I do.
07:15This would have been so freaking hard underneath that on your back.
07:21Hey everybody, any shaft that turns, blue Loctite on it.
07:25Flywheel, driveline, harmonic balancer, anything that's turning, put some blue Loctite on it.
07:31Last thing you want to do is put a guy's driveline in and you don't need to paint the crap out of it.
07:37That's all you need.
07:38That way you can sleep good at night knowing that this rig is not going to throw a driveline because you forgot to lock him in.
07:44Okay, he does good.
07:59Okay.
08:00We're greasing the guy's joints.
08:14It's the part of the job.
08:17It takes a moment.
08:18You got to clean off the greaser.
08:20You know, give him a little TLC.
08:21Tender loving care.
08:22Because, you know, the last thing you want to do is when he goes and gets his service to his regular facility, you know, and somebody says, hey, your U-joints are dry.
08:29He goes, I just paid a guy to do the carrier bearing.
08:33You know, how would you look?
08:35That's the kind of things that will build your business.
08:36Those little additional touches.
08:42.
08:53.
08:57.
08:59.
09:02.
09:03.
09:04.
09:06.
09:07.
09:08.
09:09.
09:10.
09:11Alright, got her done, just a little dirty hands.
