Car #Car engine #love car #riview car #Riview Car engine

Danh mục

🚗
Xe cộ
Phụ đề
00:00It's a beautiful day, man, and we're getting ready for the season.
00:03And I got a boat, maybe an anchor here, but I'm hoping it's not for the guy.
00:07So we're going to go through a full build on this boat.
00:10This is a resurrection of a boat anchor.
00:12Let's check it out.
00:23This is a nightmare to get this out of here.
00:25And you look at all the wiring harnesses and everything in here and cats on a boat.
00:28Oh, man, what's the world coming to?
00:31Anyway, we've got to get all this hardware and everything out of here, out of our way.
00:36And Tyson's going to get this motor out, and we'll tear it down and find out what the heck's wrong with it.
00:41How are you going to go about this?
00:43We've got to get this frame out of the way.
00:44So you get all the covers off.
00:46I'll get these bags out, and then you've got to work on getting the seat out.
00:50And then with the seat out, you then work on getting this frame out.
00:54And then you have access to taking the whole assembly out.
00:58Then it shouldn't be that difficult.
01:00Boat guys, share your tricks.
01:02You know, I don't hide nothing.
01:04Sometimes that's a bad thing.
01:05I guess I should be a little more reserved.
01:08But anybody got any suggestions, man, help us out.
01:10Beep.
04:04You think any of these guys got problems with your wives?
04:07We all have.
04:08Or is it just me?
04:10Being online, I love that, you know, because it makes it easy.
04:13They're licensed professionals.
04:15It's a safe environment.
04:16You're in your home privately, and it's very affordable and effective.
04:19Click on the link below at betterhelp.com forward slash DAC, and you'll get 10% off your first
04:25month.
04:26Try it.
04:26It really is.
04:27It's a great service.
04:28Online therapy is crazy good.
04:31I love it.
04:31Kick your feet up.
04:33Have a session.
04:34You don't even have to worry about traffic.
04:36You don't even have to worry about traffic.
04:36You don't even have to worry about traffic.
05:04I'm going to zip this off real quick.
05:34Okay, guys, we're finally starting the teardown of this six-liter.
05:53We're going to see what's going on, what the failure is.
05:57This is sometimes a really fun part because we really get to find out what went wrong and
06:03what we need to do to fix it.
06:04So let's get this thing apart and see what the crap is happening.
06:33We're going to go to, what we're going to do to fix it.
06:34Let's go.
06:35Yeah.
06:35Look here.
06:36Look at the camera.
06:36I'm going to fix it.
06:38I'm going to fix it.
06:39Look at the camera.
06:40Look, I'm going to just force you to fix it.
06:40Take it to the camera.
06:53Here.
06:54Let's go.
06:55Take it.
06:57Take it.
06:59Take it.
07:00So building boat engines, and that's what this is, is a little different.
07:13What we found was is that the front to rear deck height was over 15 thou different.
07:18So by the time we would have corrected that, our compression would have been through the
07:22roof.
07:23I'd have had to do all kinds of different stuff to make it work, so we just went with
07:27a different block.
07:28Yeah, we just went with a different block.
07:29We also found that they had the wrong cam in the boat.
07:33They didn't have enough lobe separation.
07:34So what we found on this engine is that the incorrect camshaft was installed.
07:39The original person that made the motor, they used an automotive camshaft, which leaves the
07:42intake valve stuck open longer, so it ingests seawater, so you can see all the calcium buildup
07:47and water.
07:48We feel that's an important thing, because what you'll start to do, you know, your intake
07:52stroke on a, well, it's actually the exhaust stroke, your overlap.
07:57You can actually suck water up into your motor.
08:01And that we did actually find that on this boat originally, the intake was full of water.
08:05So without specking the cam out and having, you know, a cam card on the cam that came
08:09out of that engine, I really, it's speculation to say the least, but it's the cam that was
08:15in there was a truck cam.
08:16So we put 114 degree lobe separation cam in this to solve that issue.
08:21We did put a little bit more ring gap on it.
08:23You know, these boats, they're just hanging out at five grand constantly, and there's
08:27a lot of load on them.
08:28So you get a lot of heat in those rings.
08:30So we put a little bit extra gap on those rings, so we're not button any rings.
08:33I think the biggest thing with a boat is your camshaft.
08:35You've always got to make, you got the right cam in there.
08:38Boats have a lot of load on the bottom end.
08:40So you want to make sure that cam has got that power at the bottom end until you get
08:44up there.
08:45We're going with the VVT cam?
08:47It is a VVT.
08:48It's an L96 block, which is a VVT.
08:50They don't have the fuel management, luckily.
08:53But we are actually putting a limiter in the VVT, so it doesn't have the full degrees of
08:58retardation in it.
08:59Well, we ought to get this guy straightened out.
09:01Anything different on the, we're just using a hyper eutectic piston?
09:04Flat top piston, zero decked.
09:07We're about nine and a half to one on the compression ratio.
09:09And it should be a totally different boat for this guy.
09:12All right, cool.
09:14The next day.
09:16Hey everybody, look at this.
09:19It's time.
09:20It's summertime.
09:21We got to get the boats back in the water.
09:23Good.
09:24We got this steel plate on this, not the aluminum one.
09:27So we won't lose any of our oil pressure through that.
09:29These are, don't, don't do an LS or an LT, any motor that doesn't have a steel plate on
09:35the oil pump.
09:36They'll leak.
09:37Same on the Fords.
09:38They leak.
09:39It's not the oil pressure under.
09:40And on a boat, high rev, it spends most of its time, rah.
09:45You don't, you do not want to be losing oil pressure.
09:48What else, Tyson?
09:48Just getting ready to start putting my front covers on, getting them lined up, get my oil
09:53pen on so we can get it over for sim.
09:55Now, this is the one we've got the catalytic converters on, and we've got that handled?
10:01We sent them out. They said they flow tested, so whether they still function, like reducing the catalyst, we'll see, but they said they weren't plugged.
10:11They weren't plugged. Okay, so we're going to put them back on there and see if they'll work?
10:16Yep.
10:16Okay, but we won't know whether they're actually functioning until we fire them up and get them hot, and if they light up.
10:21It has to have an exothermic reaction. What comes in is one temperature, and if it's coming out the backside of the cat, it's the easiest way to tell if the cat's dead.
10:29The cat I'm talking about does not have nine lives. It's got one of them, and so the front temperature, let's say it's 300, 400 degrees.
10:37If it's not hot or coming out the back, the cat, the substrate is dead. It doesn't work, so that's what we're going to be checking.
10:43All right, so how much longer, Tyson? Going to install this tomorrow?
10:47I've got a few more things to do. I've got to clean the hull out.
10:50Oh, yeah.
10:50Just get it pressure washed and make sure I've got my hoses and a few fittings, and then we'll get rid of it.
10:55That's Tyson. He's talking about the 10% that makes the job right, you know?
10:59We could just stuff that motor, but while we got it all out, that's the time to wash the hull and all that out of there and clean all that ick out of the bottom of that,
11:08so when the customer gets it back, he's, like, looking at, you know, basically a brand-new situation, and that little extra.
11:15My secret, that's it, man. It's that last 3%, you know, that puts it, the shine on it.
11:21Oh, my goodness.
11:22Oh, my goodness.
11:24Type's usually set.
11:40.
15:41You want it level?
15:43Pretty much, yeah.
15:44That's looking pretty good, bro.
15:47You all ready to put that in there?
15:51You might have to just move a few things, push a few things out of the way, but yeah.
16:01Man, nothing like an overhead crane.
16:03You ready?
16:04Yeah.
16:05You got to go towards the front of the boat, don't you, Tyson?
16:09Yes, I'm going to shimmy it once I get it in.
16:10I've got to do my trailer gauge around my flange.
16:11You ready?
16:12Yep.
16:13Still looking good?
16:14Yep.
16:15Eric, you good?
16:16Yep.
16:17Yep.
16:18Yep.
16:19Yep.
16:20Yep.
16:21Yep.
16:22You doing it?
16:23You doing it?
16:24You doing it?
16:25You doing it?
16:26You doing it?
16:27Maybe what you ought to do is turn this around.
16:28Yeah, same point now, dude.
16:29It's okay.
16:30It's okay.
16:31I've got a trailer gauge around my flange.
16:32You ready?
16:33Yep.
16:34Still looking good?
16:35Yep.
16:36Eric, you good?
16:37Yep.
16:52Maybe what you ought to do is turn this around.
16:54Yeah, same point now, dude.
16:55It's stinky.
16:56You want me to ride a little bit?
17:00Great.
17:01You want me to ride a little bit?
17:02Great.
17:25Thanks a lot.
17:26Yeah.
17:27And you can ride a little bit.
17:28You're bad.
17:30Cause I love you.
17:31Where is she?
17:32Isn't it crazy?
17:33Whoops.
17:34I love you in my boots.
17:35I love you in my boots.
17:36I love you some kind.
17:38You're covered in my boots.
17:39Not that a lot.
17:40You're done.
17:41They're shredded and第二個?
17:42You're pretty little bitFT.
17:43In my boots, it's fucking zij.
17:44I'll see you next time.

Được khuyến cáo