00:00In this video, you will learn how to replace the nozzle of a Bamboo Lab A1 printer.
00:08First, remove this cover.
00:18Then, remove the silicone sock.
00:22Please note that this sock can get very hot, so let the hot end cool down first.
00:30This sock is there to keep the nozzle temperature more stable.
00:35Then, push the right clip open.
00:39Ensure that both clips are open before removing the nozzle.
00:51Then, remove the nozzle, which goes very easily.
00:59You can see that there is a magnet on the back.
01:09Let's put everything back in its place now, and start with the nozzle.
01:13Place it back with the magnet on the back.
01:16You will feel when it is in the right place.
01:19First, close the left clip, and then push the right clip until it clicks into place.
01:28Now, place the silicone sock back.
01:33And finally, place the cover.
01:40Make sure you don't start from the top, but rather from the bottom.
01:50Push against it to check if it is securely attached.
01:57You might also want to check out my 3D design channel.
02:00See you there.
02:02And if you like music, you might also want to check out this channel.
Comments