Ninja Double Oven Thermometer Not Working? Easy Fixes

No Filler Fixes

✅ Cleaning Cloths I Use (Amazon paid link): https://amzn.to/3UUSit5  Disclosure: Some links above are affiliate links which means I may earn a small commission if you click and buy, at no extra cost to you.  Ninja Support: https://support.ninjakitchen.com  Ninja Double Oven (DCT451) thermometer not working? This guide shows how to plug it in fully, insert the probe past the safety line, route the cord over the top of the door, pick a supported function, and clean the probe safely plus when to call support.

Transcript

00:00Thermometer not working in your Ninja Double Oven? Fix it fast.

00:04The built-in Foodie Smart Thermometer only works if it's connected and placed correctly.

00:08Here's how to check setup and get accurate readings.

00:10Step 1. Plug it in fully.

00:13The thermometer jack is on the control panel.

00:15Push the connector in firmly until it clicks.

00:18If it's loose, the display won't register the probe.

00:21Step 2. Insert the probe correctly.

00:24Slide the metal tip into the thickest part of the food past the safety line etched on the probe.

00:28If it's too shallow or touching bone, readings will be wrong or not register at all.

00:33Step 3. Route the cord the right way.

00:35Always drape the thermometer cord over the top of the door before closing.

00:39Never pinch it in the hinge or along the sides.

00:42Closing it wrong can damage the cord and stop it from working.

00:45Step 4. Select a function that uses the probe.

00:49The thermometer works on cook modes like bake, convection bake, roast, and air roast.

00:54It won't activate on quick modes like toast or broil,

00:57so make sure you've picked the right function.

00:59Step 5. Keep the probe clean and dry.

01:02After use, wash the metal end gently in warm, soapy water and wipe dry.

01:08Never immerse the cord or connector and never run it through the dishwasher.

01:11Built-up grease can block accurate sensing.

01:14I've linked a pack of soft cleaning cloths I use in the description.

01:17They're perfect for wiping down the probe safely.

01:19If your thermometer still won't register after these checks, contact Ninja Support using the link in the description before your next cook.

01:27If this helped you get your probe working again, subscribe to No Filler Fixes for more fast appliance help.

01:33And if you need probe safe cleaning cloths, I've linked the ones I use below.

01:37Lint free, non abrasive, and safe for the cord and sensor tip.

01:41Thanks for watching and cook to temp, not guesswork.

Category

Transcript

Be the first to comment

Recommended