00:00Hi, I'm here to show you how to set up the Nanoleaf LED Light Therapy Face Mask.
00:06Now my wife has already unpacked it, so this is what came inside.
00:10You have the face mask itself along with its power cord.
00:14You have the central control and power unit.
00:17You have an instruction booklet which is also online.
00:20You have the side straps as well as side strap extenders if you need them.
00:25You have the eyepieces and then you have the charging cord for the central unit itself.
00:32Now it is important that you're not meant to use the face mask while the central unit is charging,
00:37so use that separately and that can be any USB-C cord.
00:42So I'll just put that aside for now.
00:44So firstly I'll put on the eyepieces, so turn it over to the light side, select the eyepieces,
00:54and work out which way they would fit.
00:55So that's the left eye there, that's the right eye, oh no sorry vice versa, left eye and right eye.
01:03So they have little grooves here, just gently
01:08mould it into place.
01:11These are made of silicon.
01:14So they mould quite easily.
01:16So that's the right eye there and then do the same with the left.
01:27There you go, so the eyepieces are on.
01:30And then next I shall put on the side straps.
01:36So feed that through each
01:40socket.
01:42Actually my apologies, I would have done that the wrong way around.
01:46This way.
01:47Feed that through the side straps.
01:51And fold it over.
01:53And then the same with this piece here.
01:56Through the side straps, fold it over.
02:02And then I'll test it on for size, take off the glasses here.
02:10And yes that actually feels very comfortable with the standard straps.
02:13But if you did need to use the extenders, quite easy to use.
02:22Just essentially add that there.
02:24So that extra extension.
02:29I'll just take that off and set it aside for a moment.
02:33And then comes the actual central unit.
02:37Here comes the two ports.
02:39A USB-A port.
02:41To run the face mask with.
02:45And then a USB-C port at the bottom to charge the unit.
02:49Once again, don't charge the unit whilst you're actually using the face mask.
02:53Then you have the display screen.
02:54And then you have three buttons.
02:56Power.
02:57Function.
02:58And timer.
03:00So the power button.
03:01To turn it on, you've got to put your finger on it for a couple of seconds.
03:04If you just push briefly, it won't go on.
03:06So push down.
03:07Till you hear the beep.
03:09And then on the display.
03:11Up the top.
03:12On the right, it's got the battery power.
03:14So it comes fully charged.
03:15Which is a pleasant change.
03:17It's got the intensity.
03:19Which I think at the moment is five out of five.
03:22So it's got five different levels of intensity.
03:25In the middle it's got color.
03:26So it's currently set at red.
03:28Then on the right it has NIR, so near infrared.
03:33So it's always set on near infrared.
03:35And down the bottom it's got timer.
03:36So it comes preset at 10 minutes.
03:38But you can change it anywhere from one to 30 minutes.
03:41Although five to ten is what is usually recommended.
03:44So I'll just turn it off again.
03:47Turn it back on.
03:49Now to change the color you push this button once.
03:53So it's gone from red to green.
03:57And it's got in the booklet here what the different colors are.
04:01And what the different functions are.
04:08So you've got red.
04:09You've got green.
04:12You've got blue.
04:14You've got cyan.
04:16You've got yellow.
04:18You've got purple.
04:21And then you've got white or L for light.
04:24So we'll put it back on red.
04:26Now to change the intensity you've got to push this button twice in quick succession.
04:32So it's gone down to, so it wasn't five out of five.
04:34It's gone down to one, two, three, four, five.
04:41And then to change the timer, push this button here.
04:44So it's currently at 10 minutes, so it goes to 11.
04:46So each time you push it, it goes up a minute, up to 30.
04:50Now if you want it to go quicker, you can just put your finger down
04:52and keep your, keep your finger on it.
04:54And it'll cycle through more rapidly.
04:57So once again, recommendation is five to ten minutes.
04:59So we'll just leave it at 10 minutes.
05:01So I'll turn it off again.
05:03And then we'll actually attach it to the mask.
05:08Now look at the different colors.
05:11There we go.
05:16So red, green, blue,
05:27cyan, yellow, purple, white.
05:37Back to red again.
05:42And I shall put it on.
05:52And there you go.
05:53My face is ready to be rejuvenated.
Comments