00:00So we have our micro SD card, we'll put that in.
00:09So I think we can just try pressing play.
00:18Oh, it might be starting now.
00:23It's finding home.
00:34Okay, it's starting.
00:47It doesn't even have the best occasion.
00:52But it is slowly working.
00:55So I'll just put it over itself.
01:04And see it's just sort of jumping around as it moves over the way it's already previously printed.
01:38It is sort of building up and I have to readjust the build plate and move it down slightly.
01:44Now it's up a bit high, as they say that it jumps all around.
01:48I think this is moving quite a lot.
01:55Here it is, almost complete.
01:58Should be able to take this off in a few minutes.
01:59You can see it's a rocket ship.
02:00It's taking its shape.
02:01It's a few wrinkles, not the cleanest thing, but it doesn't look too bad.
02:05I hope they'll be able to take this off and have a look at it soon.
02:14I hope they'll be able to take this off and have a look at it soon.
02:43And it's just finished printing.
02:45It's obviously retracted and you can see our rocket ship there.
02:49I'll turn it off for now.
02:51It's a bit quiet.
02:51Obviously we don't need to keep it going.
02:55I'll unplug it as well.
02:57Not sure if I should have retracted from the filament.
02:59But here is our rocket ship.
03:03Let's take that off.
03:05And you can see we've put it on here.
03:08Does it seem cool?
03:10Should be able to just bend this to get it off.
03:14That's got a very well stuck on there.
03:18Maybe I should lower the plate just so it doesn't get as good adhesion as it is.
03:24Let's worry about adhesion at the start.
03:26There you go.
03:27And you can see it's left a bit of a shape there.
03:29Hopefully that comes out and doesn't damage it over time.
03:33I'll just put that back on there.
03:38And here you can see.
03:39Look at some of the stuff from the magnetic base.
03:42The magnetic base has been stuck on it.
03:46It's very light which is what you expect.
03:48But there's a support around here.
03:50And you can see we've got these triations going up this side.
03:55There's a few gaps there.
03:58I think maybe that's when the printing has jumped or something.
04:03But obviously the lines you can feel them.
04:07It doesn't feel too bad.
04:09It feels pretty strong for something that is hollow.
04:12So that is my first print.
04:14The test a rocket ship.
04:16Some other prints.
04:17I'll try to print some practical stuff.
04:19Obviously do a few more tests.
04:20I hope we'll be able to make some proper time lapses.
04:22Not just the basic one.
04:23It's supposed to put a camera next to it.
04:25So I'll leave this video here.
04:27If you like the video or don't like the video.
04:28Comment down below your thoughts on these features.
04:29And subscribe.
04:30So you don't miss any videos like this in the future.
04:32Thanks, Ron.
04:33Thank you very much.
04:42And, um, it's about $100,000.
04:51That was a question for somebody by sharing that.
04:51But you can get $150,000.
04:51And, uh, totally get the opportunity.
04:53I can share that cultural thing. That's
04:53You
Comments