Model Y Performance Spacers: How Easy Are They to Install? (BONOSS Step-by-Step Guide)

BONOSS Wheel Spacers Grace

Thinking about upgrading your Tesla Model Y with Model Y Performance spacers​ to enhance its aggressive stance and handling? A common question is: are they easy to install? In this detailed, step-by-step guide, we show you exactly how to safely and correctly install wheel spacers on your Model Y, turning a seemingly complex mod into a straightforward DIY project. If you want a flush, performance-oriented look for your Model Y without the guesswork, this video provides all the knowledge and confidence you need. Learn how to install Model Y Performance spacers​ the right way, ensuring both a stunning transformation and long-term reliability.  #teslamodely #bonoss #wheelspacers #bloxsport  🔜Tesla Model Y/Performance Wheel Spacers:  AL6061-T6: https://www.bonoss.com/product/bonoss-forged-active-cooling-wheel-spacers-al6061-t6-pcd5x114-35x4-5-cb64-1-for-tesla-model-y-performance-2020 AL7075-t6: https://www.bonoss.com/product/bonoss-forged-active-cooling-hubcentric-wheel-spacers-al7075-t6-pcd5x114-35x4-5-cb64-1-for-tesla-model-y-performance-2020  Model Y Performance Spacers: How Easy Are They to Install? (BONOSS Step-by-Step Guide)  📄Information: Work on: ALL Tesla Model Y/ Tesla Model Y Performance Product: BONOSS Forged Active Cooling Wheel Spacers(formerly bloxsport) Material: Aluminum Alloy 6061-T6  Thickness: 15-50mm  (Hi, I’m Grace. For a better user experience, this video is original content uploaded by humans. It is not generated by Artificial intelligence (AI) Models or tools.)

Transcript

00:00A great way to improve the performance and appearance of a Tesla Model Y is by installing

00:05wheel spacers. However, it is important to choose the right type of spacers and ensure that they are

00:11installed correctly to avoid any negative effects. Let's take a look at the correct installation

00:16steps. Use a cross wrench to loosen the lug nut on the side of the wheel in a diagonal sequence,

00:22but do not remove them cumulate. Using jets to support each end of the car is a better safety

00:28measure. Use a cross wrench to remove the wheel side lug nut. Remove the wheel of the hub and say

00:34to

00:35the side, look at the wheel hub assembly for rust. You can use a brake cleaner to remove them. Remove

00:41any rust and dirt from the wheel hub with a rug. Widen the entire surface to ensure it is smooth,

00:46because all of that surface may cause the wheel spacer to not fit perfectly with the hub.

00:52Install the bonus forged FT cooling Tesla Model Y wheel spacers. Then install the matching lug nut.

00:58Tighten them with a truck wrench. A key advantage of bonus Tesla Model Y wheel spacers is the FT

01:05cooling feature. These wheel spacers are designed with petal-shaped grooves. The grooves allow the

01:10external cold air to flow continuously inside the spacer when it rotates. The air takes away the heat.

01:16After there is a patent heat for the braking system, all bonus Tesla Model Y wheel spacers are forged.

01:22In addition, high-precision Tesla Model Y wheel spacers provide high-surface integrity,

01:28effectively guarantee safety, stability, and reliability, and ensure a smooth installation experience.

01:35Install the ring and then install the stock nut. Use a torque wrench to tighten them on the wheel.

01:41Make sure they are secure. Remove the jack stands. Slowly lower the car until the tires fully touch the ground,

01:48and remove the jack. Use the torque wrench to tighten the lug nut to the specific torque.

01:53The same operation is done for the remaining wheels.

01:57Bonus recommending checking the wheels of the wheel spacers every 6 months,

02:00and checking the vehicle's operation to ensure safe driving.

02:24No AI was used in the creation of this video. All editing was done manually.

02:30See you in the next video.

Category

Transcript

Comments

Recommended