00:00okay so I'm here with the snow blower and we have the end piece here a couple washers here
00:21the insert plastic insert washers already slid those in got the sheer bolts I already put one
00:37in I haven't fastened it yet but there's the gear now the hard part about this is that rubber stopper
00:48you got to make sure that's aligned properly like I seen in one of your other videos out there but
00:58let's see I'm going to pause to see if I can get it on oh I have to take out the shear pins I didn't
01:06want to lose the alignment of the hole but it's the only way to separate open up got to put that
01:18permatex on later got to go get it I just want to see if everything will align properly okay one second
01:26now in my case only here I have that see that plastic piece at the end that'll go into the
01:43side of the spiral blade here it's just a piece of plastic with cut in the middle one second okay so
02:03that's in there on that side here's another one but I'm gonna put this back together right now and
02:14just hold it together so we'll use the five screws and I'll be right back there okay so gotta turn these
02:32and align them so bolts three bolts on each side can go in this will line up okay I put one of the shear
02:47bolts in this one is just off by a hair but I'm gonna line those up so I can finish this up everything else
03:00looks pretty good I still got to get the gasket stuff and you can put lube in there and a plug
03:06gear oil or you got to find out what type to use okay so we got the half inch back out
03:16this is I know you guys are gonna have to do it the correct way over taking that back out and the belts but in my case it popped out so I was able to pop it back in
03:34still got to get that side
03:39got to get that side aligned
04:09okay we can put nuts on those shear bolts and I gotta still bend that back
04:30okay so to end this video I'm gonna one half still doesn't work because I gotta bend it so far to put
04:48that shear pin in I'm gonna start it up and we're gonna see if it works
04:51okay see you later
