00:00That bottom pan, pretty rusty. Okay, we have the Omni 230 Toy Oset Carousel Heater.
00:15Now what the problem here has been, this first is not on right.
00:30The dual pins here should go in that top part.
00:39Yeah, because that shouldn't set flush on that.
00:42So we're going to take that off, but anyhow, the width needs to be replaced.
00:50And that's the first thing that's going to come off is this cage, one sec.
00:54So we'll just pull the handle out.
01:00First, and remove the cage.
01:05Don't forget these bottom hooks as well.
01:10They go in there.
01:14And you can take the lid off.
01:18And boy, is this going to be sooty.
01:23Messy.
01:24Reach in.
01:41Get this part.
01:43Now, you can see a little better here.
01:59Now, you'll see these knobs on the side.
02:07They might need a screwdriver, but they're usually only thumb-tight.
02:19I believe there's three.
02:24One back there.
02:26So, four.
02:39But there's just the three.
02:42And then this will pull off.
02:48Now, you can start to see the problem.
02:51This is when you want a light.
02:58It's got to have a good battery.
03:05Now, when you turn this, you can see the wick.
03:10So, the wick is short.
03:13It's pretty much done.
03:15And when you touch that, it's like the emergency shutoff.
03:24So, if you look right here,
03:27you'll see the little wing nut.
03:31There's one.
03:59Two.
04:01And it'll be right here.
04:28I'll show you when you go.
