00:00So I noticed this hose from the replacement hose here that I'm going to use from the windshield wiper car thing is small, but I think I could shave, I'm wondering how to do this, either glue it or tape it, but I think I can shave off the outside here with a razor and then just stuff it in there.
00:30So let me try that.
00:32Okay, that's what I did.
00:34Now it fit in.
00:37I just took the ends of it off.
00:42And until I go to the store and get just the right tube for it, I'm not going to glue it, but I noticed this thing went in and it won't come out the front.
00:53And so it must have went through this part because almost the whole hose went in.
01:01But as long as it fills up, that's where the water gets hidden inside here and there's only two little holes to...
01:07I wish it just went straight through, you know, where the hose went out there.
01:16But I'll just tape this and leave it one sec.
01:21Yeah, I went around the whole part with it.
01:24Just so it won't come out.
01:28Now maybe we can plug it in and try it.
01:31So I tried the coat hanger and couldn't find out where it was coming from.
01:40That was pretty tough.
01:45So before I put the pump in the back again, I want to see the water come down there.
01:51But it might fill up that whole chamber first because it'll shine a light in the back.
02:01And then you go into a dark room, you actually can see down by here some of that light.
02:08Doesn't seem to be holes down there, but something is leaking.
02:13It's still feeding through at the bottom.
02:19I want to make sure the hose is going through the top.
02:27But nothing seems to be leaking out of the top.
02:30Those suction cups are all brittle.
02:40They're not going to work, but as long as the water is over the level of the pump.
02:49Just check it.
02:51I'll take this out.
02:53It really isn't that powerful.
02:58It's the right pump.
03:00I'll put it back in one sec.
03:04There was a time where I said, just, okay, it's enough.
03:08I'm going to saw it in half.
03:10Find out where that thing's fed through.
03:15I don't know, maybe string or...
03:17It's got to bend a couple different ways, I know that.
03:26Okay.
03:27The one thing you can do first is get rid of that excess hose as soon as possible.
03:34That's what we have now.
03:39I've actually put the pump in the back.
03:43Now, I just want to fill it up.
03:52Fill it up to the top.
03:53Now, I can pull the plug on here.
04:02Now, I can pull the plug on here.
04:02See if it takes down that level of water that's up to the rocks here.
04:19And if you don't think anything's moving, pull it out.
04:40There's the...
04:48You can see the vent.
04:52That's where it'll take in the water.
04:54Hopefully, it can be submerged on its side.
05:02Yeah, you see the water going out there.
05:06So, I'm going to try to plug it back in.
05:11Let's see.
05:13Now, what I'd like to do with the end of this is dry this off really good.
05:17And I'm going to get some electrical tape, a long strip of electrical tape.
05:25And I'm going to go around just the end of that.
05:28And that might be a way of waterproofing the back so all the water doesn't run out the back.
05:35And it goes more towards the front.
05:37Hold on.
05:37Hold on.
05:38Hold on.
05:39Hold on.
05:40Hold on.
05:41Hold on.
05:42Hold on.
05:43Hold on.
05:44Hold on.
05:45Hold on.
05:47Hold on.
