Zum Player springenZum Hauptinhalt springen
😇 Dein Abo hilft uns: https://tublo.eu/abonnieren ✅ Source: Lynk & Co âžĄïž Mehr in unserem Automagazin: https://www.tuningblog.eu/wp-admin/post.php?post=315714&action=edit

Du möchtest das Heck deines BMW 5er (G30/G31) clean und minimalistisch gestalten? In diesem Video zeigen wir dir Schritt fĂŒr Schritt, wie du den Heckscheibenwischer entfernen kannst. Mit unserer einfachen Anleitung gelingt der Umbau sicher und schnell, ohne SchĂ€den an deinem Fahrzeug zu hinterlassen.

Wir gehen auf alle Details ein: Von den benötigten Werkzeugen ĂŒber die Abdeckkappe bis hin zum richtigen Verschließen der Öffnung – hier bleibt keine Frage offen. Dein Fahrzeug sieht danach nicht nur stylischer aus, sondern profitiert auch von einem einzigartigen Look, der dich von der Masse abhebt.

Perfekt fĂŒr alle, die ihren BMW individualisieren möchten, ohne hohe Kosten! Lass dir diesen einfachen Tuning-Tipp nicht entgehen und mach deinen 5er zum Hingucker!

#BMW5er #G30 #G31 #ScheibenwischerEntfernen #BMWTuning #CleanesHeck #DIYBMW #tuningblog - das Magazin fĂŒr Auto-Tuning und MobilitĂ€t!

Kategorie

🚗
Motor
Transkript
00:00Hello on the Tuning Channel.
00:03I hope you can understand me here on the street.
00:06I'll leave the car for a bit longer.
00:08Okay.
00:10I don't want to show you my dirty car,
00:12but a new project that I don't think anyone has done on the G31 yet.
00:16Namely, I want to remove the rear wiper.
00:22This is what it looks like.
00:24Here's the engine underneath.
00:26Then here's the lock.
00:28And here's the wiper arm, so to speak.
00:30And then the locking mechanism.
00:32The part here that locks the tailgate.
00:35I don't imagine it's that difficult, but we'll see.
00:39So underneath here is definitely just a classic round hole.
00:42And not as big as the entire attachment.
00:44Uh, yeah, the thing should be completely gone.
00:47Then I want to plug stuff, whatever it's called, a glass in here.
00:52And yes, I just like it better to clean the rear window, let's put it that way.
00:56Some people do that, right?
00:57Um, I would like to keep this opening function though.
01:02And I think there should be nothing standing in the way of that.
01:05Because you can assign a function to the key to this lower button on the key.
01:11Let me show you here.
01:15No, you can assign different functions to this button here.
01:18And for example, I put this one here so that the rear window opens.
01:23Um, the dampers are a little bit tired.
01:26I don't know why.
01:27Well, it should actually jump up like that, but it doesn't.
01:30But yeah, for whatever reason.
01:31That's amazing.
01:32In any case, the plan is to get rid of it now.
01:34The function is retained by the key.
01:36And yes, I would take you with me.
01:38I'm gonna take it apart now.
01:40Let's organize it in glass stoppers.
01:42And then we'll see if it works.
01:44This is what it looks like when it's disassembled.
01:47Take a look underneath.
01:48Okay.
01:49The inner rows are gone.
01:51And the outer rows, so to speak.
01:53The hole has a diameter of 32 millimeters.
01:56So it needs a 32 millimeters stopper.
01:59Uh, yeah.
02:02Otherwise, these are the individual parts.
02:04This is basically the switch here.
02:06It's just a button with two cables attached to it.
02:09Very simple.
02:10You could even come up with something in your head that you could, um, this glass stopper,
02:16if you're a bit inventive, or there's something to buy.
02:20I don't know.
02:21I don't think so.
02:22But you could even integrate a button into this glass stopper, right?
02:25Um, the thing is closed.
02:28That means you press it here and it opens.
02:30So that's what I have in mind right now.
02:31I don't know if there's anything for it.
02:32I almost don't think so.
02:34Uh, but that might be an option.
02:36But I'll put a glass stopper in here.
02:37That closes it and that's it.
02:39And this part here, it's here at the bottom.
02:44And it's basically the locking mechanism.
02:47And so that you can see that it continues to work.
02:50You can insert it here, the other way around.
02:54So then you can also see how it closes here, right?
02:58And if I open it with the key now, you can see that this function is still there.
03:08You don't have to worry about anything up here.
03:11Uh, you need the fasteners, of course.
03:14That means the part has to go here.
03:17And I don't know how I'm going to do it yet.
03:22But I think there's only the brutal version.
03:24I'd say if he finally destroys it now, it won't be that dramatic.
03:30Because yeah, you can find it on various ads and portals for 20, 30 euros.
03:36Uh, so you'll just have to live with that.
03:38If you ever want to reinstall it, you'll just have to order the part again.
03:41I think I'll just sail over here.
03:44It won't be that easy because the axle for the rear window wiper is in here,
03:48but it's not rocket science either.
03:50So I'll cut this off here and then just put it back together.
03:55Uh, I'll leave the plug blank.
03:57I don't need it anymore.
03:59Put this back together here and then put the plug in up there.
04:05And that's it.
04:06And now you've cleaned in fives.
04:08Yeah.
04:09Okay.
04:10Let's continue.
04:11By the way, this is what it looks like.
04:12I'll do it the other way around.
04:14Yes, this is exactly what the plug looks like.
04:16Uh, normally you stick the adhesive on here.
04:19And it goes into the inside of the window.
04:23Let me see.
04:24It's very, very dark here at the moment.
04:26Actually, you should adjust it like this, but that doesn't work with BMW because of this glued on area.
04:33I won't remove it here either because that definitely won't end well.
04:38But now there's space in here.
04:41And if I remove the glass plug here, you can see that it's glued together in the middle, right?
04:48You can see it.
04:49Uh, then I should be able to fit it in here like this.
04:52And yes, let's see.
04:54I'd try that now.
04:56First, let's see if it can be taken apart at all.
04:58But here in the middle, you can see that it's actually just a glue dot.
05:03And so it should work.
05:07No sooner said than done.
05:08So it's really easy with a knife, right?
05:10Cut it apart.
05:11And then we have the glass plug, so to speak, stand alone.
05:15Sorry.
05:16That's how it looks when it's inserted.
05:19It looks a bit wild now, especially everything is dirty, right?
05:22We don't need to talk about that.
05:23But first of all, it's very, very dark.
05:26And secondly, yes, it is very dark.
05:29I can't get it to look any different on my phone.
05:32In any case, it fits perfectly.
05:34It doesn't look as bad as it appears through the camera.
05:39In my opinion, you could either glue it in like this, then it sits lower.
05:43Whether that's really bad is really doubtful.
05:46But you can also adjust it right to the height.
05:50And I'll show you outside so that you can't really see any difference because it's a shiny black surface.
05:56And that's it.
05:59I'll try to put it as high as possible.
06:02That means that I simply use a lot of glue on the edge below.
06:06A bit of bodywork adhesive is used to make the plug rise to the right height.
06:11And when it's raised, I apply something else to the outer edge.
06:17Of course, it's also glued in place.
06:19And then once it's dry, you can either use a cutter knife or, let's see, remove it.
06:24And it's not rocket science.
06:26I just did this as an idea.
06:28I attached adhesive tape from behind.
06:30And put a screw in here at the top because that way I can achieve exactly the right height.
06:35The glass pane now goes on here and is then flush with the rear window.
06:39Or at least it's the way I want it.
06:41And once it's tight, I can basically pull it off from the inside and simply take it out.
06:47Glued.
06:48Like this.
06:49It's also the perfect height.
06:51I like it a lot.
06:53And, yes, I'll let it set now.
06:56And then I think the glue will become transparent.
07:00I hope so.
07:02Otherwise, it would be funny to have a white circle on a black corner window.
07:05Let's see.
07:06And the edges are covered, so if there's extra glue on top, you can remove that with a cat knife.
07:11And then the plug is already stuck in there.
07:14So, I've driven the car out now.
07:18The glue has dried out.
07:19So I'm actually quite happy with it.
07:20I've been driving a bit now, so there's already some dirt in here.
07:23Yeah.
07:24Wait a minute.
07:25Can I turn off the flash?
07:30Which I still really don't understand.
07:36Why and why do you add white glue to it?
07:39It's completely incomprehensible to me.
07:41It would be best to order some black body adhesive so that you don't have to experiment with white glue.
07:46I had white glue here.
07:49And I replaced it with black.
07:55I replaced the black.
07:57Nonsense.
07:58It was white.
07:59And I simply painted this tiny edge here black.
08:04What else was left, because a white edge definitely looks crap.
08:08Also, make sure you have black glue when you order it.
08:11Yes, but otherwise it turned out well.
08:13The car is, of course, really dirty.
08:18No matter, it still works perfectly.
08:20So, I'm going to open the tailgate with the key.
08:23And here I have, well, here's the wiper motor.
08:26It just turns when you operate the wiper.
08:30But there's no error message and nothing except for any malfunction.
08:33Everything looks normal here, except for this hole.
08:37You can either cover it up or you can leave it like this.
08:40Because normally there would be a pin sticking out of it, which goes in here.
08:44So it doesn't look any worse.
08:45Now, the important thing is that the hole is sealed, right?
08:49And it is, thanks to the plug.
08:51What I'm going to do now is this cable here.
08:56I've already disconnected it.
08:58You can see it, the plug, it's disconnected.
09:00It actually belongs there.
09:02Uh, these two cables, the black one and the blue one, quite simple.
09:07Um, they operate the opener, which is actually here, right?
09:11The one on the wiper arm.
09:13And now I'm just going to go out here with the cable, go into the roof spoiler.
09:19There's enough space there.
09:21And I'm going to install a push button down here.
09:25I think it's just here, which is recessed here, which you can't see.
09:29And then I still have this function, right?
09:34So I just press the button here and then the rear window opens in the same way.
09:38I'll show you in a moment.
09:40So to do that, you actually loosen the four screws up to here, right?
09:42It's really easy.
09:44Then he pulls off the rear spoiler.
09:47You can pull it off in this direction.
09:49It's really easy without force.
09:51And then there's a rubber stopper here, I'd say.
09:54I hope to be able to get this other cable through there too.
09:58This should be possible here.
10:01Otherwise, I'll solve it somehow.
10:04Definitely.
10:05Exactly.
10:06You can simply pull off the side panel.
10:09It's hanging up here and then you just pull it away from below and it comes out.
10:15It's definitely better than if I tried to do it on the car.
10:17Now I'm going to put the switch in first.
10:19So this wonderfully dirty car is basically finished now.
10:23Here's this little switch.
10:25Of course, you can see it, but the roof spoiler will also be added here.
10:28I'll show you in a moment.
10:29Uh, yeah, but it's really small.
10:31And I think it looks better than this huge thing here.
10:35And I run the cable along here.
10:40It goes in here.
10:42It fits like this because I don't think there's ever been any water underneath here.
10:45No water gets underneath here either.
10:47Uh, yeah, nothing happens.
10:49So pressing the button now opens the tailgate.
10:52Then the cable goes in here.
10:54It's connected to the original plug here.
10:58And this one stays blank.
11:00This is the one that goes over the rear window to the original switch.
11:04It just stays as it is.
11:06And now I'm going to put the roof spoiler on.
11:09And that's basically it.
11:13You could, now if you enjoy it, build all the fun in there too.
11:18That would also work for the cables.
11:20It doesn't make any difference.
11:21But yes, I find it up here in this area.
11:24I know that it's on the passenger side.
11:26Uh, on the driver's side.
11:28And yes, I think that fits.
11:31Now the roof spoiler is going on.
11:33Okay, that's the dirty end result.
11:36Of course, I'll go wash it at some point.
11:39But that doesn't count in this weather.
11:41So here we have the switch, right?
11:43Actually, everything's cool so far.
11:45The tailgate still opens with the remote control.
11:49You can't see the lock inside here.
11:53As I said, there's a little hole here now, I'd say.
11:55But that doesn't make any difference.
11:58Close the tailgate.
12:00And then you can have fun here at the push of a button.
12:02The original function hasn't really changed at all.
12:09Well, it's just tuning, right?
12:11Well, I'm more interested in the look.
12:13It's definitely not as practical as it used to be.
12:16That's obvious, but I think everyone who does this is aware of that.
12:20Um, the switch up here, you can basically save yourself that if you don't want it.
12:24Um, that's enough if you remove this here.
12:26You can assign the key differently.
12:28And then you can always open the tailgate with the key if you want to do it like I do.
12:32So that you can still do it then either with a switch like this or maybe someone else has another idea.
12:37Um, I've tried to provide the template now.
12:39I think it can still be improved.
12:41If so, then write it down below or send me a link to another video on how you solved it.
12:46And yes, if it helped you, then please leave a subscription.
12:50It would be really cool that our channel is growing a bit.
12:52And I say until next time and above all, a happy new year, which is coming up in two days.
12:57Ciao.
12:58Ciao.
12:59Ciao.
13:01Ciao.
13:021
13:042
13:053
13:063
13:074
13:095
13:111
13:121
13:135
13:165
13:176
13:186
13:207
13:216
13:227
13:238
13:247
13:258
13:268
13:279
Schreibe den ersten Kommentar
Kommentar hinzufĂŒgen

Empfohlen