00:01Now we are looking at this part of the wing.
00:07What we need to do is flip it to the back edge.
00:14Then you can see this edge.
00:21Just bend it over.
00:22This step is a bit tough on the fingers because there are many layers of paper.
00:33So you roughly like this make a small fold.
00:40Then you flip it over along the previous crease.
00:45Fold it in.
00:53Then you get a very perfect reinforced wing.
01:09The same goes for this side.
01:11Just bend it over like this.
01:17Fold it to this point.
01:23When you fold to this point, then you tuck it in.
01:46It reinforces the wing.
01:47It also has some effect on flight.
01:53Now we look at this part.
01:59This point.
02:01You need to these two.
02:05You fold them to here respectively.
02:10Just fold half of the part.
02:11This will help with the later tail operation.
02:15This will help with the later tail operation.
02:17Just like this.
02:18Then flip it over.
02:40Just like this.
02:41Then fold half of the loop to the side.
02:43Then flip it over.
02:53We need to fold the to here.
02:57We need to fold this to here.
03:01Then spread it outward.
03:05outward.
03:15Spread this area and also create a crease.
03:20Now we make the air intake.
03:28So this basic shape is designed according to the aircraft structure.
03:46Just like this.
03:48Then along the previous crease make a petal fold.
04:05You need to fold it down here.
04:11Apart from this point, to here.
04:41Be careful.
04:53This joint is the easiest to tear.
05:03Here you need to slot it in this part.
05:18This area needs to be slotted in.
05:37You may also need to slightly flip it down a bit.
05:42If there are several layers here, you can slightly flip it down a bit more.
05:52Then tuck it in.
05:59So here you need to fold it to here.
06:13This is folding the air intake.
06:21We need to then roll everything in.
06:32This includes the air intake.
06:37All are clamped and secured.
07:05Okay now we need to fold a little bit inward on the left and right sides here.
07:14You decide how much you want to fold.
07:17Do not fold too far inside.
07:19Just you fold it inside.
07:21Fold it inside.
07:22This is to flip it inward.
07:29Flipping inward creates a corner.
07:31We still need to fold it up.
07:38And lock it in.
07:40This is how it looks.
07:42Now here we have a nice wing.
07:45Then on the other side we can you can choose to fold it together.
07:54Do this series of steps.
08:01Now here we have a nice wing.
08:27Slot it in.
08:33Okay now we look at the bottom.
08:36We are going to make the tail.
08:47We need to pop this area from this inside point.
08:58At the same time check that this point this line is aligned.
09:09Then you can finish it and push it back.
09:14This way you see it is a bit different from before.
09:20We still need to fold from this focal point.
09:25Fold it over.
09:29Or you can skip that and directly fold to that previous focal point.
09:48Fold it up.
10:13Then fold this to the right.
10:17This needs to fold down.
10:20Fold down again.
10:21Fold down again.
10:36Fold down again.
10:38Fold down again.
10:42You can also fold it in a bit more, just like this.
11:04Next is tucking it in and so on.
11:09You can do all of that.
11:21This side is the same.
11:28You can also fold it in a bit more.
11:35You can also fold it in a bit more.
11:41You can fold it in a bit more.
11:47You can fold it in a bit more.
11:54You can fold it in a bit more.
12:02You can fold it in a bit more.
12:17You can fold just a tiny bit.
12:41This is a small detail.
12:46A small detail.
12:56Now in a moment we will make a fold.
13:06That airplane fall.
13:09Before this step we need to flip it over.
13:17We need to open this.
13:21Along this edge.
13:25Fold these inward.
13:36It is tough on the fingers because there are several layers of paper there.
13:44You can fold it.
13:45We need to do this.
13:49Okay.
13:50Now we need to.
13:54Take this.
14:01Start from this cockpit.
14:06Do the airplane fold.
14:11It is quite tough on the fingers.
14:21Then you need to let this area reach this area.
14:27Yes.
14:41This is to keep the fuselage in very good shape.
14:46Then thicker paper is harder to handle.
15:11This area needs to be separated a little.
15:25That's as much as possible.
15:30These two parts.
15:36In a moment we fold them up.
15:38Before folding up last check.
15:41We need to start from this area.
15:52Start from this crease.
15:55Do a reverse fold.
16:07Then let everyone see.
16:09What is the exact angle?
16:11As for the exact angle.
16:16It is roughly like this.
16:19It is a personal fold.
16:21It depends on the angle you want.
16:23Yes.
16:28If you want.
16:32You can continue to push this area.
16:39Push up and do some more reverse folds.
16:42You follow the original version.
16:47You just push it up.
16:48Push this up as well.
17:00Push this up as well.
17:00This is the first step.
17:14This is the first step.
17:18You just let them pass this edge a little bit.
17:32Let them pass this edge a little bit.
17:37Not too much.
17:38That is enough.
17:55Okay.
17:56You need to take this.
17:58Two places need to.
18:01Fold down.
18:02Do not fold all the way to this point.
18:06Just fold down.
18:09Then you need to.
18:13Take this.
18:17Add down just like this.
18:20Here is a locking mechanism.
18:22See it?
18:22See it it is.
18:29Fold it back.
18:32You can.
18:34Fold several times.
18:36Yes.
18:37Oh.
18:38There are extra corners.
18:40Just fold them all in.
18:42Yes.
18:43Yes.
18:43The back is the same.
19:07Sell.
19:08Sell.
19:08Sell.
19:13When you do it, make sure all these papers are pressed down.
19:34There cannot be any gap.
19:39Continue.
19:41Fold in.
19:43Fold to the back.
20:11Fold to the back.
20:13Now what you need to notice is.
20:17This does not have to be completely parallel.
20:24It might have a.
20:27Help us say it is.
20:36Roughly like this.
20:37Not completely parallel kind.
20:45This angle I made might be a bit large.
20:49You can adjust this.
20:52Hey Woo.
20:56What?
20:57Like this then fold this area down.
21:10Like this then fold this area down.
21:15Still need to fold up.
21:16We continue along this edge.
21:17Along these creases fold them inside.
21:24Along these creases fold them inside.
21:28Then just fold this inside.
21:29Now we need to.
21:45Take this.
21:47Put it up.
21:49Adjust these intake and exhaust openings.
22:13Take this air intake.
22:14Take this air intake.
22:20It is oval.
22:23It is oval.
22:23Watch the locking mechanism it is.
22:39Need to fold inside.
22:41Fold into thirds.
22:47One third.
22:49Then fold the other one third.
22:55Fold inside.
22:56This part.
23:12This part.
23:15Just.
23:17Take it then.
23:21Roll into this.
23:23These two corners were folded inside.
23:26They need to be opened.
23:28It.
23:32Roll into an exhaust port.
23:39Oh.
23:42When rolling.
23:44You need to make a crease here for later.
23:45There will be a.
23:49Fixed point for flight.
23:51Then here at the back.
23:54Can push inside.
23:57Indent a little.
24:00Just a bit.
24:02Here too.
24:16This.
24:17Need to adjust.
24:21Find the � deja.
24:23Can ya imagine.
24:24See you.
24:26Hmm.
24:27Bye.
24:27Then.
24:28Like.
24:29Bye.
24:30See you next time.
24:35Bye.
24:36Bye.
24:36Bye.
24:45Bye.
24:46Bye.
24:47Bye.
24:49Bye.
24:49Bye.
24:50Bye.
24:51Okay.
25:21Okay.
25:25By the way when you fly hold it here.
25:31Also if you want to modify it into other fighters like my G2121 and so on.
25:39Fighters then.
25:40You need to notice the front area because they all have nose intakes.
25:46If you say you want to change into those Sai Along Fighter then.
25:54It will be relatively simpler.
26:00When you fly.
26:02As I always say do not fly this plane towards anyone.
26:08I can say that money is very heavy.
26:12You need to fly towards the sky.
26:15Throw it with your greatest strength.
26:20Just like that.
26:26If it is flying model paper like Mark Consenmark then.
26:31You can buy it online yourself.
26:35But there are some A4 and some A3 sizes.
26:41It is not sold by single sheets.
26:43It is sold in packs of 100.
26:50If you cannot find that paper.
26:52You can also use craft paper as a substitute.
26:58Then okay.
26:59Duh.
27:00That is 16.
Comments