00:00Oh
00:14Assalamu alaikum
00:16It is cutting down
00:19The error comes it is the error of before which I have also written
00:23Why this error occurs what causes it and what you need to check when if I rock
00:30This is the area you have to give current to the kid the right fire is attached to it
00:34Everything is voltage you have to give it here
00:38See you here
00:41This is his communication and this line and this error is written this error was it
00:47When you have to give it voltage you have to give it current and seizures then it has a problem with the supply I
00:56Want to share with you what we saw
01:00Whose error was frequent
01:02Yes, the error of the food does not indicate by proximity or any problem
01:05So see this now I started giving it voltage from here
01:09If so see this LED has started flashing and the relay has also turned
01:14And the first thing we would have seen was in food
01:18And let's see that the voltages here are becoming full
01:21Look at this there should be twelve voltages on this regulator here on this kit
01:32Here as you know there should be five these five voltages are complete
01:37What's wrong with that? What was the problem with the kit the problem with the kit was that the voltage was supposed to come here
01:43Here the voltage was working it was not creating the pin daron voltage see this here the pin daron voltage is becoming the full pin daron voltage meter
01:56The main reason was that the voltage was not being generated on it look here when I connected it
02:01You can see that there were not even five volts on its IBM
02:08Here two or three volts but IBM had none
02:12Look at this pin we should see five volts on pin four
02:15Verify that these are five volts
02:28Five volts are now here
02:32The issue was that the IPM was shorted we have removed it
02:38The five volt pin had a short after removing the IPM a short 15 volts
02:45Now we will install a new IBM this is a kit fo error that will clear up
02:56If there is an error in this kit you need to know this key point to be continuous
03:00In this switch places have what voltage and where should the voltage be
03:07If you liked the video I tried to give you all the information
03:11If you enjoyed the video subscribe like and share thanks good bye
Comments