00:00This cut work is done in Azeo, in Orit, in Peel, in Kanur, in Cheung-Hung-Rubah,
00:28this cut mango comes in it, the mango is an error.
00:33Everyone's different, F1 doesn't mean that.
00:36That it contains this fart, hence the F1.
00:40But the main thing is to trace anything.
00:43How do you trace it out?
00:48Because if you know the function of the object,
00:51how much voltage it will do and how it functions, what is in it,
00:56then you can do the job easily.
01:00If there is a solution, let it sound, let it sound.
01:03You cannot use this today.
01:05I aim to explain all about voltage and how to check it when F1 shows up.
01:09You can resolve it.
01:14But today we will manage all this work.
01:19Today we will complete all this work and demonstrate it on the screen.
01:22I am at the microscope because here I can give you all the details,
01:28but you still might not understand.
01:33Let us go to the microscope now.
01:36Look, this is something you will see here.
01:41Its function is to control the shunt here based on the voltage.
01:44The voltage of the shunt is significant.
01:51A nice video exists.
01:52You can watch it.
01:54It must manage this.
01:55It is showing if the voltage here is too high or too low.
01:59The question is whether to have PFC or not.
02:03One thing is that there is an IC which is also an OPM circuit IC.
02:07This IC operates in these two areas.
02:10Yes.
02:11This has VCC and this is its ground.
02:15The voltages vary in this and they check them.
02:19When you check the voltage in the IC, it varies.
02:22This pin goes where, how and where it connects.
02:26It has a microprocessor and the voltages are higher
02:30when it understands that here there is a higher voltage leading to F1.
02:35And this is how it works.
02:39In this place.
02:50It protects how many volts.
02:52It protects how many voltages here.
02:55How many voltages it protects here.
03:01He controls both.
03:02Now we have the issue of F01.
03:06Why is F01 here?
03:08Today we'll check it out differently.
03:11We'll see how to check F01.
03:14I've added a sensor.
03:18Now I'll set the meter to voltage.
03:21Look, it's on auto now.
03:25I'll show you the voltage.
03:26Look, I've put in a reactor.
03:27After that I'll let it run.
03:30Let's see how it does.
03:32It will inform us about the problems in the IC.
03:38Now we'll put all the ICs there and check them.
03:41Look, let's demonstrate this.
03:44Look, F01 is appearing here.
03:48Its light is blinking now.
03:49This means F01 is here.
03:55F01 is here but there's an error.
03:58Look at this.
04:00Check it out.
04:01Check it out.
04:02Check it out.
04:04Checking a voltage.
04:05Here's how to check.
04:09G. This is the test.
04:10I see it.
04:11It is staged on the ground.
04:12Show it.
04:13It is on the ground.
04:14It is on the ground.
04:15Okay.
04:16On GG ground I have tagged.
04:18I am going to check the voltage of all the ICs to see which one has fart so that we can easily trace the fart.
04:26Let's take the find out so that we can give it the voltage first.
04:31Yes, look at the pin number one.
04:32It is written here.
04:33They will check it from here.
04:34They will check how much voltage is coming.
04:36Yes, you will see that the voltage is fine.
04:40Now I will check the voltage on the pin number two.
04:44Yes, this pin number is correct.
04:46And when you check the voltage, look for the Brent brick.
04:56No.
04:57Pin number five.
04:58I applied to see the source are coming on it.
05:00As the pin number is here, look one, two, three.
05:02One, two, three.
05:03This is the phone number.
05:05I am five number.
05:06Pen.
05:07We found the voltage on it.
05:08Right also on six and eight.
05:09The voltage is full on this IC.
05:10This is our system.
05:11And then.
05:12We will work on this to see how this IC operates.
05:13Look at this IC.
05:14First, I will shut down this IC.
05:15After that, I will shut it.
05:16Because the supply is from the front and it is in F1C.
05:17This IC is connected.
05:18Now, let's check the voltage.
05:19First, I will show you where the voltage is at.
05:20Now, let's check the voltage.
05:21First, I will show you where the voltage is at.
05:22Now, let's check the voltage.
05:23First, I will show you where the voltage is at.
05:27Likewise, I have made contact with the ground.
05:28See, after touching this point, I will check the voltage here.
05:29Now, let's check the voltage.
05:30First, I will show you where the voltage is at.
05:32Likewise, I have made contact with the ground.
05:34See, after touching this point, I will check the voltage here.
05:37Now, let's check the voltage.
05:38First, I will show you where the voltage is at.
05:44Likewise, I have made contact with the ground.
05:50See, after touching this point, I will check the voltage here.
05:58About how much it's 14 volts.
06:0114 volts are here.
06:02Check this pin.
06:03Look, 14 volts are on it.
06:05This is wrong.
06:06Now, we check this.
06:10See the voltage here.
06:11Yes, it has voltage too.
06:13If it goes high, that's the problem.
06:15If it slow here, then voltage will be at this level.
06:21The problem is voltage error.
06:22Now, we will discharge it.
06:24Check this.
06:27So, I am going to discharge.
06:29This is done.
06:30But what's next in it?
06:31Now, show them over there.
06:35This, I'll set the meter to bus mode.
06:40Okay, it's in bus mode now.
06:41Now, it's in bus mode from here.
06:46Now, here, I'll show you the wire.
06:51The line is going this way.
06:53Look at this pin.
06:54It first went from here.
06:55It went from here.
06:58Next, observe here.
06:59They arrived.
07:00From this point, the number 5 is placed at 60 after passing.
07:07Here, and then look.
07:11After this, this number.
07:13This is the chip.
07:14Look here.
07:15See?
07:16It's cool that here is the milk meme.
07:17It shows the infinite Mikan level is high.
07:30So, it showed an error here.
07:32This pin is okay.
07:34Look here.
07:35After passing, see this pin.
07:37The voltage arrives here.
07:41The issue is that this pin's voltage has no fault.
07:50A fault has occurred.
07:52Now, we have a fault in this pin that goes here.
07:55We will check this resistance, and it is fine.
07:59After that, the circuit from here.
08:02This is our coming here after such breeze, Q military.
08:13Constitute wood.
08:14See?
08:21This is our SMD.
08:23Saheed to be telling you one Kiki hai ya 105 hoon telling, but that's right.
08:30But the problem is that it is messing up.
08:37See?
08:38Sometimes it is messing up.
08:40Sometimes it is giving different readings.
08:42Now, we are the first.
08:43I changed this SMD in myself to keep it focused on it.
08:48That is bad.
08:52Yes.
08:53Look at this SMD.
08:54I have changed it.
08:55You install it.
08:56You must have seen its voltage here before.
08:5715 tricks.
08:5815-15 voltages.
08:59Maybe they are installing it.
09:00Now, we are going to check how other voltage is in it.
09:03Where and how much voltage does it come from.
09:05Now, check this out for one.
09:08This is over now.
09:09I'm from here.
09:10Show them on this side from fuse the eye.
09:13From here, I see this now.
09:14Checking the voltage of the meter here.
09:16Yes.
09:17See that all the voltage have been completed.
09:19Yes.
09:202-5 voltages have been completed.
09:22Get the factory done for your blight.
09:26Get the factory done for your blight.
09:35Just here is now.
09:36Call it now.
09:37Complete system is clean now.
09:38I will start running it and see if our compressor is turned on and all.
09:41It is fine or not.
09:42It is fine or not.
09:43Because the vehicle comes on while running.
09:44I mean enough to be used in bodies.
09:47Now, let's turn it on.
09:48I will turn it on now and see what the compressor is.
10:06This is our star.
10:07Okay.
10:08Look at this.
10:09Yes.
10:10It is the same kit as before on which we have just changed this empty.
10:14It has a problem that many faults are due to many reasons.
10:19There are types of faults that we check.
10:24It doesn't happen that it is caused by something like this.
10:29It is bad like this.
10:30Another problem comes from something like this or something else happen.
10:35So, I didn't feed him for long.
10:38That is enough.
10:39Oh God.
10:43Even if 15 herbs do not come here, even if the herbs don't come it will come.
10:59Until you know the whole circuit, this way you can easily repair this crack.
11:10If you like our video, then like it.
11:14Be sure to subscribe.
11:16You watch the video but don't like it.
11:18Like it doesn't hurt you.
11:19Yes, but I make such a video with hard work.
11:22I give you good treatment.
11:23Please like it.
11:24Thank you, Jaina.
11:25God Hafiz.
Comments