00:00Assalamu alaikum.
00:02Sir, today I came for tire repairing.
00:06There is an error of H.
00:10H is an error of 3.
00:12The H3 error occurs because the compressor overheats due to some reason.
00:20Or if the condenser is dirty, it comes at that time.
00:24This is the error of H.
00:26But now it is lying outside.
00:28Neither the condenser is dirty nor the compressor is hot.
00:32The compressor is also completely dry.
00:34There is no problem.
00:36But neither is it overloaded with compressors.
00:40Now we do the error of the H string.
00:44Now after turning off we see all of it.
00:52Now first of all this is not an H series error.
00:56But that's right, it's jacked up.
01:00It will need to be pulled out with great effort.
01:02No issues here.
01:04Check this.
01:06You must connect it to the main circuit for testing.
01:10I will connect this meter.
01:12I will connect this meter.
01:14When we check it, we should see an error.
01:24This is alright.
01:26We have removed this.
01:28It's okay, but what happens now?
01:32This is a case of error.
01:34Errors are expected and it doesn't happen fast.
01:38It's a simple issue.
01:40These two pins are connected here.
01:52Often this issue occurs where the rest of the microprocessor arrives later.
01:56This often goes bad.
01:58It is usually 330 homes.
02:00But it does look as a salary.
02:02It is a cash.
02:04Non-2000 homes.
02:06See this.
02:08It is dead.
02:10It is dead.
02:11We will change it.
02:12Is somebody here?
02:13Look.
02:14Did somebody have different size?
02:16It will fit in it.
02:17Our size will fit in it.
02:18I will take it out.
02:19It will fit in this.
02:20So, for taking it out, we will put it here.
02:21And then I will check it in like you know.
02:22Oh.
02:23Oh.
02:24Oh.
02:25Oh.
02:26Oh.
02:27Oh.
02:28Oh.
02:29Oh.
02:30Oh.
02:31Oh.
02:32Oh.
02:33Oh.
02:34Oh.
02:35Oh.
02:36Oh.
02:37Oh.
02:38Oh.
02:39Oh.
02:40Oh.
02:41Oh.
02:42Oh.
02:43Oh.
02:44Oh.
02:45Oh.
02:46Oh.
02:47Oh.
02:48Oh.
02:49Oh.
02:50Oh.
02:53Oh.
02:54Yeah.
02:55I have removed it you should see it.
02:56Look at the bed.
02:58Oh.
02:59Oh.
03:00Oh.
03:01Oh.
03:02Oh.
03:03Oh.
03:04Oh.
03:05Oh.
03:10Oh.
03:11Oh.
03:12Oh.
03:13Oh.
03:14Oh.
03:15Oh.
03:16Oh.
03:17Oh.
03:18Oh.
03:19Oh.
03:20the value is visible you can see it but if I check from this side connecting it
03:25here then this inner part we will also connect this jack so its value should
03:31show all right where did it disappear to
03:36see this show 330 ohms from inside the jack zoom in a bit on both things stay back a bit
03:54the meter above and both will be visible look 330 ohms I checked this from both sides under the
04:02jack we have made the change now let's see if the error has been removed no we will check it
04:11properly now I have turned it on now and let's see if the H3 error is resolved it has been removed see
04:24it is now on now the compressor will be on let's wait for the compressor then turn it off
04:32since it lacks a heat sink there is no heat sink because of the repairs we do clearly the board
04:41needs to be placed here so heat sinks and boxes are necessary if kept in boxes it won't function properly
04:48look sir the compressor is here it is on now and the H3 error is the SMD was effective so we repeat it
05:04this was the reason for the error if you found the video good please like it and subscribe to our channel
05:12we fix this error now we have taken the cover off let's on it we will switch this off okay thank you for
05:28being the video God bless
Comments