Watch our videos on this channel to learn the most advanced and skillful ways of diagnosing and repairing many types of Printed Circuit Boards (PCB). We use many types of advance tools to troubleshoot and fixing the problem. We also provide videos on Industrial, Commercial & Domestic Refrigeration Systems and Air Conditioning. Please Subscribe to our channel to stay updated and to keep learning. Thank you for Visiting our channel. Please don't forget to Subscribe, Share and like :) if you have any questions, please feel free to contact on +92 333 8921850
#code repair # inverter ac PCB course #review for ac repairing course #ACPCBrepairingcourse #AC PCB training institute #ACPCBrepairing #ac PCB repairing course in Pakistan #ac PCB repair #Repair ac #PCB #repair ac PCB repairing #BestACPCB repairing #ACrepairing course# best ac PCB repairing # inverter ac PCB repair and voltage study # ac PCB board repair # How to repair inverter ac PCB board # ac PCB repair Kaise kara# inverter ac PCB online course # inverter ac PCB repairing institute # inverter ac indoor PCB wiring # Haier washing machine PCB repair # online inverter repairing course# circuit repair training # inverter operation in power electronics #Basic electronics channel #inverter fridge PCB repair #washingmachinePCBrepaircourse# inverter circuit board #ac repairing training center #AC Godraj inverter AC #Ustad #Babar #BabarPCB #Babarelectronics #Haier inverter ac New model inverter PCB#DC inverter Haier outdoor PCB #Haier inverter ac old model inverter PCB# Haier indoor PCB # E1# E2# E3# E4# E5# E6# E7# E8# E9# EE# EH# F1# F2# F3# F4# F5# F6 #F7 #F8 #F9 #FO #FU #PO #P1 #P4 #P7#PH #H5 #OB #U8 #EE #EH #F1 #F21 #F24 #F25 #F28 #H5 #Samsung #E121 #E122 #E468 #E485 #Panasonicerror #H15 #H27 #H30 #Dawlance #C4 #mamunkanjan #electronics #inverter Washing machine PCB repair #Washing machine PCB Diagram #Gree Dc Dawlance PEL Orient Dc inverter ac P4 error code outdoor pcb Dc inverter ac PCB PEL #Dawlance Orient Kenwood #Changhong PEL Orient# Dawlance Kenwood Haier Dc inverter ac E7 error code outdoor pcb TCL DC inverter ac EE P4 P6 P8 error code Gree Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Changhong Ruba Dc inverter ac E5 error code VRF PCB repairing center Babar ElectronicsDawlance Dc inverter ac F1 error code outdoor pcb Dc inverter ac error code repair Sir BabarChanghong Ruba Dc inverter ac J5 error code Electrolux Dc inverter ac J5 error code outdoor pcb Dawlance Dc inverter ac P4 error code outdoor pcb Dc inverter ac service center sir Babar Kenwood Dc inverter ac FO error code outdoor pcb inverter ac pcb teacher Sir BabarHaier Dc inverter ac 1 ton /1.5 ton /2 ton PCB connection VRV / VRF PCB repairing center Sir BabarHaier Dc inverter ac compressor off in one minute No error IPM kya hai IPM Testing Sir Babar Gree DC inverter ac outdoor pcb E8 error code and indoor pcb Orient Dc inverter ac outdoor pcb P4 error
#code repair # inverter ac PCB course #review for ac repairing course #ACPCBrepairingcourse #AC PCB training institute #ACPCBrepairing #ac PCB repairing course in Pakistan #ac PCB repair #Repair ac #PCB #repair ac PCB repairing #BestACPCB repairing #ACrepairing course# best ac PCB repairing # inverter ac PCB repair and voltage study # ac PCB board repair # How to repair inverter ac PCB board # ac PCB repair Kaise kara# inverter ac PCB online course # inverter ac PCB repairing institute # inverter ac indoor PCB wiring # Haier washing machine PCB repair # online inverter repairing course# circuit repair training # inverter operation in power electronics #Basic electronics channel #inverter fridge PCB repair #washingmachinePCBrepaircourse# inverter circuit board #ac repairing training center #AC Godraj inverter AC #Ustad #Babar #BabarPCB #Babarelectronics #Haier inverter ac New model inverter PCB#DC inverter Haier outdoor PCB #Haier inverter ac old model inverter PCB# Haier indoor PCB # E1# E2# E3# E4# E5# E6# E7# E8# E9# EE# EH# F1# F2# F3# F4# F5# F6 #F7 #F8 #F9 #FO #FU #PO #P1 #P4 #P7#PH #H5 #OB #U8 #EE #EH #F1 #F21 #F24 #F25 #F28 #H5 #Samsung #E121 #E122 #E468 #E485 #Panasonicerror #H15 #H27 #H30 #Dawlance #C4 #mamunkanjan #electronics #inverter Washing machine PCB repair #Washing machine PCB Diagram #Gree Dc Dawlance PEL Orient Dc inverter ac P4 error code outdoor pcb Dc inverter ac PCB PEL #Dawlance Orient Kenwood #Changhong PEL Orient# Dawlance Kenwood Haier Dc inverter ac E7 error code outdoor pcb TCL DC inverter ac EE P4 P6 P8 error code Gree Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Changhong Ruba Dc inverter ac E5 error code VRF PCB repairing center Babar ElectronicsDawlance Dc inverter ac F1 error code outdoor pcb Dc inverter ac error code repair Sir BabarChanghong Ruba Dc inverter ac J5 error code Electrolux Dc inverter ac J5 error code outdoor pcb Dawlance Dc inverter ac P4 error code outdoor pcb Dc inverter ac service center sir Babar Kenwood Dc inverter ac FO error code outdoor pcb inverter ac pcb teacher Sir BabarHaier Dc inverter ac 1 ton /1.5 ton /2 ton PCB connection VRV / VRF PCB repairing center Sir BabarHaier Dc inverter ac compressor off in one minute No error IPM kya hai IPM Testing Sir Babar Gree DC inverter ac outdoor pcb E8 error code and indoor pcb Orient Dc inverter ac outdoor pcb P4 error
Category
🤖
TechTranscript
00:00Assalam-o-Alaikum, In this kit, there was an error of F1 which was not getting removed.
00:07And this brother has sent it to us, he is a mechanic, he had sent it.
00:11He checked everything, but the error of F1.
00:13Now, it has been checked.
00:15In its low side, the IPM, you will get my movie on my channel.
00:20Low side, it is complete, you can check it.
00:23I have removed it from here.
00:26Now, I am going to reinstall it.
00:29My main purpose was to make a movie.
00:31Firstly, my brother, subscribe to the channel.
00:34Watch the whole movie.
00:36And if someone wants to take training, he can also come and take it.
00:39There was an error of F1 in this, but the problem was in its low side.
00:43Now, I am going to change this.
00:44Because of the low side, because of the fault, this IPM.
00:47My purpose of making this movie was that you get to know the way to install it.
00:53How to install it.
00:55This is also there, but once again, I made the movie.
01:00Now, I will install it here.
01:03After installing it, we will apply it, we will do the soldering.
01:06After applying this heat sink, how is it soldered?
01:11I will give you all the information right now.
01:14I have installed it like this.
01:18You see, it has come out.
01:21Now, the problem is that if I do the soldering like this,
01:25then it will go up and down from the side.
01:28Or it happened that it came up more or went down slightly at one level.
01:35So, this heat will be done and it will burn.
01:38Okay, it will be brushed at the same time.
01:40The easy solution to this is that in this, now,
01:44this heat sink, we will put it properly.
01:49You see, I have installed it now.
01:52Now, after installing it, I will install the whole screw of it.
01:56It will not happen that I have installed two, three, five.
02:00No, I will install it completely.
02:02As many as there are, it does not happen that if,
02:05anyway, you have to watch the whole movie carefully.
02:08This is of great benefit because if you install it as a common man,
02:13then often this claim comes that when you screw it,
02:16it cracks from inside or does not crack.
02:19So, this problem also comes in it that often it is said that
02:22it burned after a few days.
02:25This often comes in it, it starts burning again and again.
02:29And at one time, your microprocessor also burns.
02:33You see, I will install it.
02:35Now, I will install all the screws of it.
02:37First, I will install all the total screws of it.
02:42Especially for IPM, okay?
02:45Because if I let the IPM be loose,
02:48then this whole, it does not have to be tightened once.
02:53Okay?
02:54It has to be tightened in a level with great care by installing both the screws around it.
02:58So that in this, it has been changed twice or three times before.
03:04It has been changed two or three times.
03:05These guys have come to us from Pakistan.
03:10And now I have to do them well and give them.
03:13Inshallah, their complaint should not come again.
03:17The error of F1 was not being removed in this.
03:20F1 was coming.
03:21What else was there?
03:23L4.
03:24It was of L4.
03:25It is said that L4 was also coming.
03:27F1.
03:28Have you installed it before?
03:29Yes, I have installed it before.
03:31From where?
03:32I have installed it from the same place.
03:34Then?
03:35Then I have installed it from another place.
03:37I have installed it from there.
03:38Okay.
03:40Now, Inshallah, it will work perfectly.
03:43And you will not have any complaints.
03:45Inshallah.
03:47See this.
03:48I am installing this so that the whole level is made.
03:51It should not be that from one side, it is left from somewhere.
03:54Even a little, it will be damaged at the same time.
03:58Do not over-tighten it.
03:59Do not break it by pressing it.
04:02Just do not over-press it a little.
04:05Now see, it has come out in a level.
04:08Now you will not know how it is installed.
04:11Now I will take you out on the screen.
04:19See this.
04:20Now we have to do the soldering.
04:22How to do it?
04:23How to do it?
04:24See this.
04:25You put it like this.
04:26I put it here.
04:27Okay.
04:28See like this.
04:29One is installed.
04:30See this.
04:31It is a very useful thing.
04:32Understand.
04:33It is installed like this.
04:34After this, we will come here.
04:35Do not solder it all of a sudden.
04:37It is not that you start from the top and run from one side.
04:41Never do such soldering.
04:43Because if you do such soldering,
04:45then the system installed below,
04:47the IC,
04:48that overheats.
04:50So never do such a thing.
04:52Now this is installed.
04:53Now after this, we will install this.
04:55I will solder it in the same order.
04:58Because if I do it in one order,
05:02then it will heat from below.
05:04Okay.
05:05Never do such soldering to any IC.
05:08See this.
05:09We have to do such soldering like this.
05:12Okay.
05:13Keep this thing in mind.
05:14Because if you do it directly like this,
05:16it will happen.
05:17No problem.
05:18It will work.
05:19Do not say that we do it like this every day.
05:22It works.
05:23It will work.
05:24But its limit,
05:26the limit is reduced.
05:29Never do this to any IC.
05:32Do not do this.
05:33Do this.
05:34Do this.
05:35See this.
05:36I am doing this.
05:37The video becomes long.
05:39Watch it.
05:40Never do such a video.
05:42It is not my loss.
05:43It is yours.
05:44There are many things that we have to tell.
05:47You do the video like this.
05:49You will not understand.
05:50Okay.
05:51See this.
05:52Like this.
05:53Now I do it like this.
05:54See this.
05:55Okay.
05:56I do it like this.
05:57Slowly.
05:58Now I leave two or three.
05:59Okay.
06:00Now I come here.
06:01But I am giving two in all.
06:02Just like this.
06:03Itwill not work.
06:04But this will remove the heat.
06:05Now I move to the other end.
06:06Okay.
06:07This.
06:08I am going to sew this.
06:09Okay.
06:10See this.
06:11Like this.
06:12It is not connected.
06:13I am doing like this.
06:14Now it is your turn.
06:15This utmost positive.
06:16Alright.
06:17See this.
06:18If you do this,
06:19you mustice it with solder iron.
06:20Whole,
06:21Like this.
06:22Okay?
06:23Way to increase heat.
06:24Like this.
06:25You mustice like this.
06:26Like this.
06:27sir?
06:28There is no heat.
06:29Does not make any difference to work.
06:30You can see that it has heated up.
06:32Now this side is done.
06:36The other side is done.
06:38You have to do the same for this side.
06:40You can see that it is done.
06:42I have picked it up in the same way.
06:44Now I have come to the low side.
06:46You can see that I have come to the low side.
06:48So that it cools down a little.
06:50You should never do the soldering like this.
06:52That is why I am telling you this.
06:54These things are not told by the common man in the video.
06:58Now do it like this.
07:00You can see that it has become like this.
07:04Now I will leave it.
07:06I will come here again.
07:10I have told you the trick.
07:12If you do it like this,
07:14there are many things which
07:20You can see that it has become like this.
07:22Now we will put it like this.
07:28The paste that I have used in this is also good.
07:30Do not use light paste.
07:36And the solder iron
07:38is that
07:40the tape inside it
07:42like
07:44if you put it,
07:46it glows a little in it.
07:48It will not do in this.
07:50We put that.
07:52Because if it glows in it,
07:54then there is such a problem.
07:56You understand that
07:58the problem is gone.
08:00Now this is the last one.
08:02Now let it cool down a little more.
08:20We will clean it later.
08:22How much is left now?
08:24Now one or two are left.
08:30Now you have seen that
08:32it had to be better
08:34because
08:36how many times have you put it?
08:38I have put it three times.
08:40You have put it three times.
08:42The customer is sitting next to me.
08:44You have put it three times.
08:46Now if this duct had come,
08:48then you yourself understand
08:50that we had to do it like this.
08:52It had to be very good.
08:54But there is a compulsion
08:56that there is a lot of damage
08:58in the print etc.
09:00We will try to put it
09:02like genuine.
09:04God willing, it will be.
09:06And it will not be felt again
09:08that it has been repaired again.
09:14The solder we use
09:16is also pure number one.
09:18The amount of lead in it
09:20is very less.
09:22In fact, it is almost impossible
09:24to not have lead.
09:28Our soldering is complete.
09:30Now let me show you the duct.
09:34Now you can see from here
09:36that it is soldered
09:38exactly like the original.
09:40Our soldering is complete.
09:42Because they took it out three or four times
09:44and brought it.
09:46So if there is a little problem,
09:48otherwise we tried
09:50to do it in a good way.
09:52Now let's run it and see
09:54that there is no problem in it.
09:56Otherwise, the error of FF1
09:58has been removed or not.
10:00We started putting paste on it.
10:02After doing the paste,
10:04we will put the heat sink.
10:06We will tighten the screw of it.
10:08After applying the paste.
10:10Look, I will apply the paste
10:12on it like this.
10:14Try the video.
10:16I will tell you the whole work.
10:18If you want to learn everything,
10:20then watch the whole video
10:22and like it.
10:24And remember to subscribe to my channel.
10:26So that whenever our video comes,
10:28you get a notification
10:30and you can watch the new video.
10:32If you watch this video
10:34and do all the work,
10:36then you can do something
10:38next season.
10:42But often people say
10:44that there is no need
10:46to apply paste here.
10:48But the benefit of paste is that
10:50the air gap in it will
10:52eliminate the air gap.
10:54This is the benefit of paste.
10:56Apply paste and try
10:58to apply it.
11:02Now I have applied the paste.
11:04Now I will put the heat sink
11:06on it and put the screw
11:08on it.
11:10So that you can see it.
11:12This is my number.
11:14If you want to contact
11:16any brother,
11:18you can contact him.
11:22Now I have put this
11:24above because
11:26I had to put it upside down.
11:28I had to put it here.
11:30So I had to put it upside down
11:32because I have not cut it yet.
11:34Now we cut this too.
11:36Let's put it first.
11:38So that we can cover it
11:40and it does not move.
11:42When it moves,
11:44when it is a little on the side,
11:46then the paste will come down
11:48on our side.
11:58This screw is OK.
12:00Now see
12:02what is the important thing
12:04to see in this.
12:06That's why I keep telling you
12:08that our screw is OK.
12:10Now see
12:12this thing, we will cut it
12:14because I have put a new IPM.
12:16Now the stage of cutting it
12:18is up to you because
12:20if you cut it like a mango,
12:22then it will look
12:24like a very bad cutting.
12:26See, we do it like this.
12:28You have to take two pieces of mango
12:30and put it on it.
12:32See, I have
12:34put it on it.
12:36OK.
12:38Now see,
12:40this is our cutter.
12:42Now take the cutter
12:44and from here
12:46in one level
12:48press it from the bottom.
12:50OK.
12:52Now I am cutting it like this.
12:54OK.
12:56Whenever I cut it like this,
12:58the benefit of this is that
13:00we get cutting in one level.
13:02OK.
13:04Now I am cutting it.
13:06See,
13:08the cutting is done in one level.
13:10It is not cut from the top.
13:12Now I am cutting it
13:14in this level.
13:16See.
13:18OK.
13:20The problem is that
13:22your work should be so careful
13:24that the common man
13:26says that it is genuine.
13:28You should be careful.
13:30See.
13:32It is not a difficult work.
13:34It is a little hard work.
13:36The video is long, but it is good.
13:38You should watch it.
13:40I don't make such videos
13:42that common people make.
13:44See, it is done.
13:46See, this wire was burnt.
13:48This spiral is finished.
13:50We don't make such videos.
13:52The video is genuine and good.
13:54But it is not the same
13:56that wires are burnt
13:58and wires are not removed.
14:00You should learn this.
14:02Now we have leveled it.
14:04See, it is 100% level.
14:08Now I am going to run it.
14:10You have to see
14:12that the compressor starts.
14:14The customer is sitting with me.
14:16We have to give it.
14:18Now we run it.
14:20This is the outdoor motor.
14:22This is the indoor motor.
14:24This is the communication motor.
14:26This is the compressor.
14:28After installing the compressor,
14:30I will run it.
14:32See, it is on.
14:34See, I have turned it on.
14:36The lights are on.
14:38It is off.
14:40I have turned it on.
14:42I have set the temperature to 16.
14:44This is the outdoor motor.
14:46You can see it.
14:48This is the indoor motor.
14:50The compressor is on.
14:54We have put the IPM.
14:56Now you can understand
14:58that how to complete
15:00the IPM.
15:04Now the IPM will be completed.
15:06See the speed.
15:08I have put the load on it.
15:20Our kit is ready.
15:22If you like my video,
15:24like and share it.
15:26Subscribe to my channel.
15:28If you want to take training,
15:30you can see this number.
15:32You can take training.
15:36Khuda Hafiz
Comments