00:04Greetings friends, today I present the simulation in Factorio for the subject of control
00:09Hydropneumatic, it is about the transport and selection of boxes, which consists of sensors
00:14which will activate the pneumatic cylinders; on the control panel there is a button for
00:19Start and Stop buttons, displays for additional cash register counting, and a stop button.
00:24In case of emergency, pressing Start will begin counting and selecting boxes.
00:29by activating the pneumatic cylinders, which are activated by the sequence
00:34of work, A more, A less, B more, less.
00:59Here we can see the working sequence of the pneumatic cylinders, as shown
01:15Pressing the emergency button will deactivate the system.
01:45Similarly, pressing Stop will stop the system.
02:00Okay, now I'm going to show the developed program that begins with Start, which through a
02:05S and R will activate the conveyors and activate the Start button, then with the button
02:10Adding a "Not" to the Stop command will be the Reset to stop the conveyor belts.
02:15The stop button will be connected directly to a reset button for the pneumatic cylinders.
02:20It will be through the sensors; the first sensor will be connected to or later to a C, T, U counter
02:25whose Reset will be connected to a Pusher Front Limit, in the counter C, T, U, the P, V will be
02:31connected to a numerical, which will be one for activation will be in Q, go to a Pusher
02:361, we do this for the second pneumatic cylinder, with Pusher 2, and for activation
02:41The displays will be affected by the connection of the input sensor to the system line.
02:46to another counter, T, which will be connected to a numerical counter, and in C, V, the will be connected
02:51displays using 2 floats, and that's all, thank you for your time.
Comentarios