00:19Hello friends, today I present the work corresponding to programmable logic controllers.
00:24Here I will discuss level control using a factor, and nowadays because
00:29For this I will try to explain each segment, in which the first segment deals with the communication that is
00:35by default to communicate with factor and today therefore,
00:39The second segment deals with the stop logic; I start and stop with a normally closed contact, which, through reset,
00:45It establishes the reset of the valves and other elements in the third segment; I establish the ignition logic.
00:51which, through contact, allows the actuation of the filling valve; the following segment deals with the
00:58timer which will allow you to set the action level, by means of DigiteConf.
01:07Here we can observe the variables established in the programming; they are of type boolean.
01:29The following table deals with all the variables involved in both the factor and me as a day per
01:48I'm showing the schedule again.
02:12Okay, now I'll move on to the simulation of the PLC 1200 and Factor and I, here we compile the programming
02:18with the truth
02:19and
03:00We establish communication between Factor and Me and Aunt Port.
03:16As can be seen, it will be activated every 60 cubic centimeters for 5 times according to the soothing exercise.
03:59Now it will proceed to the download which by default will be from the same hand.
04:30Subscribe to the channel!
04:50Okay, thank you for your attention.
04:55Subscribe to the channel!
Comentarios