00:00A great way to improve the performance and appearance of your focus is by installing
00:05board view spacers.
00:07However, it is important to choose the right type of board focus view spacers and ensure
00:14that they are installed correctly to avoid any negative effects.
00:18Let's take a look at the correct installation steps.
00:21Use a cross-range to loosen a lug nut on the side of the wheel in a diagonal sequence,
00:26but do not remove them completely.
00:29Using jets to support each end of the car is a better safety measure.
00:35Use a cross-range to remove the wheel side leg nut, remove the wheel of the hub, and say
00:41to the side, look at the wheel hub assembly for rust.
00:44You can use a brake cleaner to remove them.
00:47Remove any rust and dirt from the wheel hub with a rack, widen the entire surface to ensure
00:53it is smooth, because all of that surface may cause the wheel spacers to not fit perfectly
00:59with the hub.
00:59Install the bonus-fold active cooling for the focus view spacers.
01:04Then install the machine like that.
01:06Tighten them with a plug wrench.
01:09A key advantage of bonus-fold focus view spacers is the active cooling feature.
01:14However, these bonus-fold focus view spacers are designed with heat dissipation screws to make
01:19brake cooling better.
01:21Distribute the impact of the shape.
01:23These screws allow this channel-cold air to flow continuously inside the wheel spacery rotates.
01:29The air takes away the heat, so it achieves the purpose of actually disinfecting heat for the braking system.
01:36All bonus-fold focus view spacers are forged.
01:40In addition, high-precision-fold focus view spacers provide high-surface integrity,
01:46effectively guarantees safety, stability, and reliability, and ensures more installing experience.
01:53Install the rim and then install the stock net.
01:56Use a plug wrench to tighten them on the wheel.
01:59Make sure they are secure.
02:02Remove the jack stands.
02:03Slowly lower the car until the tires fully touch the ground, and remove the jack.
02:09Use a plug wrench to tighten the leg nut to the specific torque.
02:13Always tighten them in a diagonal sequence.
02:16This will ensure that the leg nut work.
02:19The set operation is done for remaining wheels.
02:22Bonus-recommended checking the wheels of the fold focus view spacers
02:25every 6 months and checking the vehicle operation to ensure safe driving.
02:35No AI was used in the creation of this video.
02:39All editing was done manually.
02:41See you in the next video.
02:43,
02:43,
02:43,
02:44,
02:44,
02:44,
02:44,
02:44,
02:44,
02:44,
02:44,
02:44,
Comments