Ninja Creami Leaving Plastic Shavings? Here's Why

No Filler Fixes

📦 Recommended Ninja Creami Compatible Pints and Lids (paid link): https://amzn.to/3Ru5Cmu   Extra pints make it easier to prep multiple recipes and try different modes without cleanup between spins.  Ninja Creami (NC300UK) leaving plastic shavings in your dessert? This guide shows what causes it and how to stop it — from pint problems to blade alignment.  In this video, you’ll learn: How to prevent plastic scraping Why overfilling makes it worse What to inspect before use When to stop and contact Ninja  As an Amazon Associate, I earn from qualifying purchases — it helps support the channel at no extra cost to you.  📌 Applies to: Ninja Creami (NC300UK) 📌 Ninja Support: https://support.ninjakitchen.com/hc/en-us  #ninja #ninjaluxe #ninjacreami #ninjadrinkmaker #slushimaker #howto #fixit #troubleshooting #kitchenfix #appliancerepair #slushifix #frozendrinks #kitchengadgets #kitchenhacks #diyrepair

Transcript

00:00Noticed plastic bits in your Ninja Creamy ice cream?

00:04That's not normal, and it can happen if something's not aligned or installed correctly.

00:09Here's how to stop it from happening again.

00:11Step 1. Only use official Ninja pints.

00:14Third-party or warped containers can rub against the blade or lid.

00:18Always use the pint that came with your machine, no substitutes.

00:22Step 2. Don't overfill the pint.

00:24Filling past the max line can press ingredients against the blade.

00:28That extra pressure can cause the paddle to scrape the lid or container.

00:32Step 3. Inspect the lid and paddle before use.

00:36Check the blade arms for rough spots or nicks.

00:39Also look for damage inside the lid that could shred plastic during spinning.

00:43Step 4. Make sure the bowl is locked in properly.

00:47If the bowl isn't seated evenly, the paddle may wobble and rub the side of the pint.

00:51Twist the handle all the way down until it clicks.

00:54Step 5. Clean and dry everything before each use.

00:58Moisture or sticky residue can cause parts to shift slightly under pressure.

01:03Make sure all components are clean and dry before assembling.

01:06Still seeing plastic shavings?

01:08Stop using the machine and check all parts for wear.

01:11Ninja support link is in the description if you need a replacement lid or paddle.

01:15If this helped, subscribe to No Filler Fixes for more fast appliance guides.

01:20Got another issue?

01:21Drop it in the comments.

01:22We might feature it next.

01:23We'll see you next time.

01:31Bye.

01:33Bye.

01:35Bye.

01:37Bye.

01:39Bye.

01:41Bye.

01:43Bye.

01:45Bye.

01:47Bye.

01:49Bye.

Category

Transcript

Be the first to comment

Recommended