00:00Is your Ninja Creamy flashing an error message or refusing to run a cycle?
00:05Here's what the most common alerts mean and how to clear them.
00:08Error. Install. Blinking or solid.
00:12This means something isn't fully locked in.
00:15Double check that the pint is seated in the outer bowl,
00:18the lid is clicked into place, and the bowl is locked into the base.
00:22The machine won't start unless all three are secure.
00:25Error. Lights flashing with no movement.
00:27This usually signals a safety lock issue or sensor fault.
00:32Unplug the unit for 60 seconds, reassemble carefully, and plug it back in.
00:37Make sure there's no food residue blocking the latch or lid sensor.
00:40Error. Unit won't spin but lights are on.
00:43Could be a jammed paddle or misaligned pint.
00:46Remove the bowl, check for blockages, and try again with a properly softened pint.
00:51Error. Motor stops mid-spin.
00:53If the motor shuts off suddenly, the base may be overheating or detecting resistance.
00:58Let the unit cool for 10 minutes, soften your pint slightly, and retry.
01:03Still seeing errors?
01:05If the machine is completely unresponsive or shows blinking lights with no clear cause,
01:10you may have a failed sensor or motor fault.
01:13Ninja support link is in the description if you need to escalate.
01:15If this helped, subscribe to NoFillerFixes for more fast appliance guides.
01:21Got another issue?
01:22Drop it in the comments.
01:24We might feature it next.
01:26Thanks for watching and good luck clearing those errors.
Comments