Ninja Slushi Buttons Not Responding? Here’s the Fix

No Filler Fixes

Ninja Slushi (FS300/FS301) not responding when you press the power or preset buttons? This guide walks through simple ways to get your control panel working again — from power resets to cleaning tips.  📦 Recommended soft brush set for buttons and control panels (paid link):  https://amzn.to/3GheJEI  As an Amazon Associate, I earn from qualifying purchases — it helps support the channel at no extra cost to you.  📌 Applies to: Ninja Slushi FS300 / FS301 📌 Ninja Support: https://support.ninjakitchen.com/hc/en-us  #ninja #ninjaslushi #slushimaker #ninjadrinkmaker #howto #fixit #troubleshooting #kitchenfix #appliancerepair #frozendrinks #diyrepair #kitchengadgets #kitchenhacks

Transcript

00:00Ninja slushy buttons not responding?

00:03Try this first.

00:04If your ninja slushy won't respond when you press a button, no lights, no beep, no

00:08reaction, it's usually a power or alignment issue.

00:12Here's what to check when nothing happens.

00:14Step 1.

00:15Hold the button down longer.

00:17These buttons aren't super sensitive.

00:19Instead of tapping quickly, press and hold the power or preset button for a full second

00:23and then release.

00:25That's often enough to register the input.

00:27Step 2.

00:28Unplug and restart from scratch.

00:30If the control panel still doesn't respond, unplug the machine, wait 30 seconds, then

00:35plug it back in.

00:36This resets the internal system and clears any stuck state from a previous cycle.

00:41Step 3.

00:42Check for moisture or buildup on the panel.

00:44Dried sugar, sticky mix, or even condensation can block the buttons from registering.

00:49Wipe the panel with a soft, dry cloth, especially around the power and preset areas.

00:55Step 4.

00:56Make sure the vessel is seated correctly.

00:59The machine won't respond if the container isn't fully locked in.

01:03Remove and reseat the vessel firmly until it clicks into place, then try again.

01:07If the buttons still don't respond, there could be an internal control issue.

01:11Check the support link in the description for next steps.

01:14If this got your slushie back up and running, subscribe to NoFillerFixes for more fast fixes.

01:19And if sticky residue is a recurring problem, we've linked a soft electronic safe brush set

01:25in the description, perfect for keeping buttons clean.

01:27Thanks for watching and swirl in control.

01:30Get your slushie back up and running.

01:31Get your slushie back up and running.

01:32Get your slushie back up and running.

01:33Get your slushie back up and running.

01:34Get your slushie back up and running.

01:35Get your slushie back up and running.

01:36Get your slushie back up and running.

01:37Get your slushie back up and running.

01:38Get your slushie back up and running.

01:39Get your slushie back up and running.

01:40Get your slushie back up and running.

01:41Get your slushie back up and running.

01:42Get your slushie back up and running.

01:43Get your slushie back up and running.

01:44Get your slushie back up and running.

01:45Get your slushie back up and running.

01:46Get your slushie back up and running.

01:50Get your slushie back up and running.

Category

Transcript

Recommended