Step-by-Step: How to Install 6x5.5" Wheel Spacers on Your Leopard 5 (BONOSS DIY Guide)

BONOSS Wheel Spacers Grace

If this is your first time fitting 6x5.5" spacers to your Leopard 5, this video will help. Leopard 5 wheel spacers are devices that fit between the wheel hub and the wheel, creating a gap that pushes the wheel outward. This can reduce the wheel's offset, which is the distance between the wheel's center line and the hub's mounting surface. A lower offset can increase your Leopard 5's track width, which is the distance between the center lines of your left and right wheels. This can improve the stability, cornering, and appearance of your Leopard 5.  In this video, we will show you step-by-step how to fit wheel spacers on your Leopard 5 correctly and safely. Before we begin, make sure you have the following tools and materials.  A jack and jack stands A wheel lug wrench and torque wrench An impact wrench A wire brush or sandpaper A set of hub-centric wheel spacers that match your Leopard 5's bolt pattern, hub bore, and desired thickness.  #leopard5 #wheelspacers #bonoss #bloxsport  🔜Click Here to get the BONOSS BYD Leopard 5 Wheel Spacers: BYD Leopard 5(Fang Cheng Bao 5): https://www.bonoss.com/product/bonoss-forged-leopard-5-wheel-spacers-chz  Find all the BONOSS Accessories you love at: https://www.bonoss.com/shop-full-width/  Step-by-Step: How to Install 6x5.5" Wheel Spacers on Your Leopard 5 (BONOSS DIY Guide)  📄Information: Work on: BYD Fang Cheng Bao 5/ BYD Leopard 5 2024-2025 Product: BONOSS Forged Active Cooling Wheel Spacers(formerly bloxsport) Material: Aluminum Alloy 6061-T6/7075-T6 Thickness: 15-50mm  (Hi, I’m Grace. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial intelligence (AI) Models or tools.)

Transcript

00:00A great way to improve the performance and appearance of your car is by installing wheel

00:08spacers. However, it is important to choose the right type of spacers and ensure that they're

00:14installed correctly to avoid any negative effects. Let's take a look at the correct installation

00:20steps. Use a cross-range to loosen the lug nut on the side of the wheel in a diagonal sequence,

00:25but do not remove them completely. Using jets to support each end of the car is a better safety

00:32measure. Use a cross-range to remove the wheel side lug nut. Remove the wheel of the hub and set it to

00:38the side. Look at the wheel hub assembly for rust. You can use a brake cleaner to remove them. Remove

00:45any rust and dirt from the wheel hub with a lug. Widen the entire surface to ensure it is smooth,

00:50because all of that surface may cause the wheel spacer to not fit perfectly with the hub.

00:56Install the bonus-forged FT cooling wheel spacers. Then install the machine lug nut. Tighten them

01:02with a torque wrench. A key advantage of bonus wheel spacers is the FT cooling feature. These

01:08wheel spacers are designed with petal-shaped grooves. The grooves allow this tonal-coated air

01:13to flow continuously inside the wheel spacer when it rotates. The air takes away the heat. After the

01:20dissipating heat for the braking system, all bonus wheel spacers are forged. In addition,

01:26high-precision wheel spacers provide high-surface integrity, effectively guarantee safety, stability,

01:32and reliability, and ensures more installing experience. Install the ring and then install the

01:38stock nut. Use a torque wrench to loosen them on the wheel. Make sure they are secure. Remove the jack stands.

01:46Slowly lower the car until the test fully touch the ground, and remove the jack. Use a torque wrench to

01:53tighten the lug nut to a specific torque. Always tighten them in a diagonal sequence. This will ensure

01:59that the lug nut work. The same operation is done for remaining wheels. Bonus recommends checking the use

02:06of the wheel spacers every 6 months, and checking the vehicle's operation to ensure safe driving.

Category

Transcript

Comments

Recommended