Master Autodesk Revit Wall Modeling with this complete step-by-step tutorial covering professional architectural wall design, advanced wall editing, compound wall construction, wall layers, wall junctions, and architectural detailing.
This tutorial covers 15 essential topics to help you develop professional Revit modeling skills, from basic wall types to advanced wall configurations and architectural components.
Topics Covered in This Tutorial:
1. Create Wall Types in Revit
2. Creating a Compound Wall
3. Unlocking Wall Layers
4. Assigning Functions to Wall Layers
5. Working with Boundary Layers and Wall Joins
6. Control Wall Junctions
7. Embed Walls
8. Attaching Walls to Floors and Roofs
9. Editing Wall Profiles
10. Creating Slanting and Tapered Walls
11. Editing Assigned Wall Taper Settings
12. Creating a Baseboard and Coping Stone
13. Importing Profiles to Create a Sweep Type
14. Using Wall Reveals
15. Adding Architectural Columns
Who Should Watch?
- Architects and Architectural Designers
- BIM Modelers and BIM Specialists
- Revit Professionals
- Civil Engineers and Construction Professionals
- Students learning Autodesk Revit
Learn professional architectural wall modeling techniques and improve your Autodesk Revit BIM workflow.
Subscribe to Autodesk 786 for more free Autodesk Revit, Civil 3D, BIM Modeling, Architecture, and Infrastructure Engineering tutorials.
Learn. Model. Design. Build Your BIM Skills
#AutodeskRevit #RevitWallModeling #RevitTutorial #WallModeling #BIMModeling #RevitArchitecture #CompoundWalls #RevitWalls #ArchitecturalDesign #WallLayers #WallJoins #RevitBIM #BIMArchitecture #Autodesk #RevitTraining #ArchitecturalModeling #BIMWorkflow #Autodesk786
This tutorial covers 15 essential topics to help you develop professional Revit modeling skills, from basic wall types to advanced wall configurations and architectural components.
Topics Covered in This Tutorial:
1. Create Wall Types in Revit
2. Creating a Compound Wall
3. Unlocking Wall Layers
4. Assigning Functions to Wall Layers
5. Working with Boundary Layers and Wall Joins
6. Control Wall Junctions
7. Embed Walls
8. Attaching Walls to Floors and Roofs
9. Editing Wall Profiles
10. Creating Slanting and Tapered Walls
11. Editing Assigned Wall Taper Settings
12. Creating a Baseboard and Coping Stone
13. Importing Profiles to Create a Sweep Type
14. Using Wall Reveals
15. Adding Architectural Columns
Who Should Watch?
- Architects and Architectural Designers
- BIM Modelers and BIM Specialists
- Revit Professionals
- Civil Engineers and Construction Professionals
- Students learning Autodesk Revit
Learn professional architectural wall modeling techniques and improve your Autodesk Revit BIM workflow.
Subscribe to Autodesk 786 for more free Autodesk Revit, Civil 3D, BIM Modeling, Architecture, and Infrastructure Engineering tutorials.
Learn. Model. Design. Build Your BIM Skills
#AutodeskRevit #RevitWallModeling #RevitTutorial #WallModeling #BIMModeling #RevitArchitecture #CompoundWalls #RevitWalls #ArchitecturalDesign #WallLayers #WallJoins #RevitBIM #BIMArchitecture #Autodesk #RevitTraining #ArchitecturalModeling #BIMWorkflow #Autodesk786
Category
📚
LearningTranscript
00:09Floors itself. So to show you this, if I select the floor that's making up the ramp and then
00:15choose edit boundary from the modify floors ribbon tab. So now we don't need to make any
00:22actual changes to the floor boundary. We can just click finish edit mode and then we'll be asked a
00:28question about attaching to floor. This question is asking if we would like the walls that we can see
00:33highlighted behind the question here to attach to the underside of the floor that we're editing.
00:39So we'll click attach and now we can see that these walls follow the line of the floor
00:44and go up to its underside. And now any changes that we make to the floor, so if I select
00:51this
00:52and we can use the modify sub element from the modify floors ribbon tab and we'll select the
00:58two edges at the bottom here which are slightly too high and from the options bar we'll change
01:03the elevation to minus eight feet. And once we apply that we can see that the floor changes its height
01:10and now as the walls are attached to the underside of the floor we can see that they follow along.
01:16We can also do this manually on a wall by wall basis. So to show that happening on the area
01:22of
01:22the tower over here we'll create a roof and then we can attach the walls to the underside of the
01:28roof.
01:30So to create the roof I'll first open the floor plan roof and then we'll zoom into the area of
01:36the
01:36tower at the bottom of the screen. And then from the architecture tab under the build panel we'll choose
01:45the roof by footprint tool. Now we'll create a circular roof so we'll change the sketching tool to be a
01:53circle and then we'll snap to the center of the walls and then we'll set the radius to be 50
01:59feet.
02:01And now we'll draw a slope arrow to create the actual slope of the roof. So from the center here
02:08we'll draw out at 45 degrees to meet the edge of the roof. And then we'll just use the grip
02:13to drag the
02:15center and back out to the edge on the opposite side so that it stretches across the entire roof.
02:22We'll leave the settings for the slope arrow as they are default being 10 foot
02:26height offset from the head and then we'll click finish edit mode to actually create the roof.
02:32So now we'll swap back to the 3d view and we can see that we've got the roof created.
02:38Though it is slightly too low so whilst it's still selected from the properties palette
02:43we'll change the base offset from level to 5 foot just to move it up slightly.
02:49So now we're ready to attach the walls to the roof so I'll select the top walls here and using
02:55the control key we'll select multiple walls. And now from the modify walls ribbon menu
03:01we can see we have the attach top base tool. So I'll click this and then looking at the options
03:08bar
03:08we can see we have the options to attach either the top or the base of the wall so we'll
03:12leave this set
03:13to top. And then we'll just select the roof for the walls to be attached. Now looking around we can
03:20see the walls extending up to the underside of the roof. And as they're attached if we make any changes
03:26to the roof that will be reflected in the walls. So we'll select the roof and then from the modify
03:31roof ribbon tab we'll choose edit footprint. Then we'll just select the slope arrow and we'll change
03:38the height offset at tail to 20 feet. Now we'll click finish edit mode. Now we can see the slope
03:47of the
03:47roof has been changed and the walls that we attached have followed this change ramp. We can see we have
03:53some walls that are sticking above the ramp itself and ideally we want the wall to follow down the line
03:59of the ramp but we need it to be slightly offset above the ramp so therefore using the attach tool
04:06wouldn't achieve the result we're looking for as that will attach it to the underside of the floor.
04:11So to change the slope manually from the modify walls ribbon tab we'll choose edit profile.
04:19This takes us to a sketch mode and we can see the shape of the wall in elevation as a
04:24sketch in the view.
04:26So all we need to do now is just sketch the line at the top of the wall which is
04:31going to follow down
04:31the ramp. So to do this I'll use the pick lines sketching tool and then from the options bar I'll
04:38set an offset of one foot. And now we'll come over to the top of the ramp and just picking
04:46on that it
04:46will create a sketch line that is one foot above that ramp. So now we just need to tidy up
04:52the sketch so
04:53using the trim extend to corner tool from the modify menu we'll click on the lines to create the corners
04:59that we need. So now we have the new shape sketched in we'll click finish edit mode and now we
05:07can see
05:07the original shape of the wall which is still defined but now when I deselect this we can see that
05:12the
05:12wall itself is following down the ramp just one foot above it. So I'll repeat this for the wall on
05:19the
05:19opposite side of the ramp and this time rather than click edit profile from the ribbon tab double
05:25click on the wall as this will also take us into the edit profile tool. So we'll repeat the process
05:31I'll choose pick lines from the sketching tools but this time I'll leave the offset to zero and instead
05:38of picking the line of the ramp itself I'll actually choose the top of the wall that we created opposite
05:45and this line will then be projected into the profile of the wall that we're editing.
05:50So now once again we'll use our trim extend to corner tool to tidy up the sketch
05:55and then click finish edit mode and we have a similar result to the one on the opposite side of
06:00the
06:00ramp. So lastly on the wall by the stairs we'll need to draw this in manually so really we want
06:08this
06:08to follow down the slope of the stairs and then continue on at around three feet from the floor.
06:14So we'll select the wall and then from the modify walls ribbon tab we'll choose edit profile.
06:21We'll start to draw a line so if I come over to the vertical edge here and then I can
06:26type in three
06:27feet on this temporary dimension and then sketch the horizontal line in. Now I'll use the pick lines tool
06:33once again and we'll set the offset in the options bar to be three feet.
06:42So then we'll click on the support by the side of the stairs to create a line that's three feet
06:47offset
06:47from there. Then finally we'll use the trim extender corner to clean up the sketch.
06:58So now that we have that sketch complete so to achieve this we'll select the walls around the
07:03outside of the tower so holding down the control key whilst picking the walls to multiple select all of them.
07:18And now looking in the properties palette we have the cross section definition panel and we can see
07:24the cross section is currently set to vertical. So from the drop down list I'll change this to be slanted
07:32and beneath this we have the angle from vertical which is currently zero degrees so let's change
07:38this from zero to be 10 degrees. Now I'll move my mouse back over the view to apply those settings
07:46and we can now see all of the walls that we had selected around the tower are slanted by 10
07:51degrees
07:51and are sloping outwards as they rise up the tower.
07:57This looks a little bit too extreme so let's change that slant angle to 5 degrees and see how that
08:02looks.
08:05And I think it needs to be somewhere in between so let's set the angle to 8 degrees.
08:12And yes this looks good so we'll leave it at 8 degrees and this will be a good design feature
08:16for our project.
08:21To show how we can control this slant a bit more we'll open up this section view upon the section.
08:28Looking at the wall to the right of the view that's containing the pond water
08:32we'll select this wall and in the properties palette we'll change its cross section to slanted
08:42and then we'll change the angle from vertical to 5 degrees and then apply this to the wall.
08:49And we can see that it slants inwards towards the water so now we'll go back to the properties palette
08:55and we'll change it to a negative 5 degrees and we can see that that now slants outwards so
09:01using positive or negative numbers will control the direction in which the wall slants.
09:07Looking in the view we can see that we have temporary dimensions and a grip at the top of the
09:12wall
09:12that we can use to control the slant angle too. So for example if we click on the temporary dimension
09:19and change its value here so let's set this to be negative 10 degrees and we can see that adjust
09:26as it would do as if we were changing it in the properties palette. Alternatively we could just drag
09:32the control at the top of the wall which will adjust the angle and be a bit more interactive
09:37and the external face sloped out to get thicker towards the bottom of the wall.
09:44So with the wall selected we'll go back to the properties palette and from the cross section
09:49parameter we'll change it from slanted to tapered. However we now have a warning message
09:55telling us that we need to assign a variable thickness to one of the layers in the wall type
10:00in order for it to taper. So we'll click close and then we'll change the cross section definition back
10:07to vertical on this wall. And then from the top of the properties palette we'll click edit type to
10:16access the wall's type properties. Now we need to click the edit button next to the structure parameter
10:22to access the wall assembly and we can see the layers that make up the wall so we have granite
10:28tiles
10:29either side of a central concrete structural layer. We can see this reflected in the preview.
10:35Thinking about how this wall type would slope and get thicker it would be the concrete layer that we
10:41want to change and the granite tiles would maintain their current thickness of two inches.
10:47Looking at the list of layers the last column on the right hand side is titled variable and we can
10:53check the box for the concrete layer to enable that to be variable. We can only have one variable
10:59thickness layer within a wall type so if I check it for one of the other layers the lower granite
11:04tile
11:05layers here we can see that the concrete one unchecks itself. I'll check the concrete one once more and we
11:11can see that the other layer is now no longer set to be variable and that's all we need to
11:15do in here
11:16so click ok to save these changes. Now back in the type properties we can see we've got the cross
11:23section definition panel that's been added to the parameters. In here we have the default exterior and
11:30interior angle so I'll set the exterior angle to be five degrees and we also have a parameter to define
11:38where the width of the wall is measured at so this allows us to choose the fixed width point of
11:44the
11:44wall for when we set the taper value. So looking up here we can see that the wall is just
11:49one foot thick
11:50by choosing the top option for this parameter it will remain one foot thick at the top of the wall
11:57and therefore any variation will occur towards the bottom of the wall. So click ok now to save and apply
12:04these changes to the model. When the wall is still selected in the view and we can see that we
12:09have
12:09a dimension indicating the one foot width at the top of the wall and it hasn't tapered yet as we
12:15need
12:15to change its cross section parameters. So in the properties palette we'll change it from vertical to
12:21tapered and we can see the default exterior angle below this and when we apply it we can see the
12:27exterior
12:27face of the wall tapering out at the default five degrees and also we can see the top of the
12:34wall
12:35remains one foot thick as indicated by the dimension here. So with the wall selected at the bottom of the
12:42wall we can see that we have the drag control and the temporary dimension here to be able to control
12:48the
12:48angle of the taper. So if I just drag the control point here as soon as I let go we'll
12:55be prompted
12:56with a choice because we're effectively going to change the default that's set in the type properties
13:03so we can either cancel this and leave it set as the type properties or we can create an instance
13:10override which is what we'll do and then looking in the properties of the wall here we can see that
13:15the enable angle overrides is checked and the exterior angle shows the angle that we dragged the grip to
13:22and we'll keep updating as we interactively edit it within the view. We can also edit the temporary
13:28dimension in the view to update those taper angles. So I now uncheck the enable angle overrides in the
13:35properties and this will set them all back to the default in the type properties and we can see that
13:41updated in the view and the exterior angle now in the properties palette being greyed out.
13:48And then we'll swap back to the 3D view and
13:53look at the walls that surround the pond here we can see the one we've edited with the exterior
13:58tapering out. We'll select the return wall here and change its cross section parameter to be tapered
14:05and we'll leave that as the default settings of 5 degrees.
14:08And now where the two wall joins in the profile family is used to define the 2D cross section which
14:15is then extruded with the sweep tool. The sweep tool is useful for creating components such as a baseboard,
14:22cornice or coping stone. And looking at the top of the building we will create a coping around the parapet
14:30of the external walls. We'll use the wall sweep tool to do this but first we must load a profile
14:36family into the project to define the cross section shape of the coping. So from the insert ribbon tab,
14:45on the load from library panel we'll choose load Autodesk family.
14:50And this will open a browser for the Autodesk sample content based on the cloud.
14:55First we just need to check that our locale region is set to United States Imperial.
15:03And now we can browse to the profile group on the left hand side here.
15:08And then we'll choose the wall subgroup and then in the results shown on the right hand side here we'll
15:16choose the parapet cap precast and then click load to load that into our project.
15:23So now that we have that loaded we'll use the sweep tool so from the architecture ribbon tab
15:28on the build panel. From beneath the wall tool we'll choose the wall sweep tool.
15:36And now looking in the type selector we can see we have a baseboard and cornice type so we need
15:41to
15:41create the coping type. So to do this click edit type to access the type parameters of the cornice
15:50and then we'll click duplicate to create a copy. We'll assign the name parapet code pin and then click
15:58OK to save this. Now looking at the type parameters we have a parameter for profile.
16:06It's set to default so we'll click this and then from the drop down list we can see the parapet
16:11cap
16:11precast profile that we loaded and we'll choose the 20 inch wide version.
16:18We also need to assign a material so just beneath we'll click by category next to the material parameter
16:24and then we'll open the material browser from the ellipses button that appears.
16:28Use the search box at the top to search for stone materials.
16:32From the list of search results we'll click Travertine and then click OK to assign this
16:37material onto our parapet coping sweep. So now we can click OK to the type properties
16:44and that's our sweep type created so zooming into the walls we can see it previewed as we move our
16:50cursor around. We'll click the top of the wall here and then we'll click the side wall that joins in
16:55and we can see that starting to be placed.
16:59So now we just need to select the remainder of the walls and we need to make sure that
17:04we select the external face of these walls so that the parapet coping has a consistent
17:10orientation around the external walls that we're selecting.
17:15So once we've selected all of those walls and then beneath that we have the level and offset from level
17:21and I happen to know that there's a parapet level in this model so we'll change it from site.
17:27So let's select site and then from the list of levels we'll scroll down and choose the parapet level.
17:34And once we're there we don't need it to be offset so we'll change that to zero
17:39so that the sweep then sits at the parapet level and then should that level change at all in the
17:44project
17:45our sweep will change with it.
17:49So that finishes creating the coping for the top of the wall
17:53and now we need to add a baseboard into the reception area on floor 2.
17:58So to do this we'll open up the floor plan floor 2
18:08and the reception area that we need to work on
18:11is the one here in the middle of the plan number 227.
18:15Now the sweep tool won't work in a plan view
18:17so we need to create a 3d view and to do this we need to select the room so
18:23hovering just near the room tag we can see the room highlighted and then we'll click to select that
18:29and then from the modify rooms ribbon tab on the view panel we'll choose the selection box tool
18:35and this will then take us to a 3d view and the section box will be set around the boundary
18:41of the room.
18:44Now we just need to adjust it so we can see in so i'll select the section box
18:49and using the controls on the top we'll just drag these down so we can see into the reception
18:56and whilst we're here we'll use the controls on the front to drag this forward a bit
19:00so we can see a bit more of the context around the reception
19:05so now we have that section box created we can see the area of the reception that we need to
19:09add the
19:10baseboard into so to do this we'll use the sweep tool again so from the architecture ribbon tab
19:18on the build panel under the wall tool we'll choose wall sweep
19:24and then from the type selector we can choose the baseboard type
19:29and now we can click some of the walls in the reception area to start placing the baseboard
19:34so we'll choose this one and the two side walls and then we'll click on modify to stop it just
19:40there
19:42and we can see the sweep that's been created we can see it stopping either side of the doors
19:47and on the side walls we can see that it's actually extending through into the offices
19:52this is because the wall that makes this edge of the reception also continues through to the office
19:59as well so to fix this we need to select the sweep and we can see that it has quite
20:05a number of drag
20:06control points at the ends of the sweeps and looking at the wall going through the office here
20:11we can see that we have a drag control point so let's drag that back and snap it to the
20:16corner
20:17of the reception wall and then if we do that to the opposite side of the reception
20:22we can see that we have our baseboard just in the reception area and not going through to the offices
20:29and if we zoom in here we can see we have a nice mitered joint in that corner too
20:34so now we need to set the height of the baseboard and if i select it looking at its instance
20:40properties
20:40we can see that it's associated to level 2 which is correct so to get the correct location we'll use
20:48the align tool this time so from the modify ribbon on the modify panel we'll click align and then we'll
20:54select the top of the floor slab for the reference and then we'll get the underside of the baseboard
21:01so that it aligns on to the top of that floor slab
21:08so now zooming into one of the doors here we can see that the baseboard actually projects through the
21:14trim on the door and that's not really how we want it we'd rather it stopped at the back edge
21:20of the trim
21:21and i know that trim is actually three inches wide so we'll select the sweep again
21:27and then we'll click edit type from the properties palette to access its type properties
21:31and then here we have the parameter default setback so we'll set this to be three inches
21:38changes and we'll click ok to save those changes and now the sweep will be three inches back from
21:44the edge of the door which will line up with the back edge of the trim so now we just
21:49need to add in
21:50the remaining walls to this sweep so whilst it's still selected on the modify wall sweeps ribbon tab
21:56we'll choose add remove walls and now we can just click on the walls around the reception area that
22:03don't have the baseboard as the reveal tool will cut into the wall it's useful for creating recessed
22:09features such as shadow gaps and panel lines looking at the walls at the end of the building
22:16these are where we replace the reveals and to do this we'll go to the architecture ribbon tab
22:22from the build panel under the wall tool we'll choose wall reveal
22:28we have the reveal type chosen so we'll click edit type to review its properties we have default setback
22:36which is set to zero and we'll leave that as is and we can see the profile is set to
22:40default
22:42so we'll choose this and then from the drop down list we'll choose the reveal brick course
22:46one brick now we'll click ok to save those changes and now we're ready to place the reveal
22:54i can see the preview of it as i move my cursor over the wall we'll click just below the
22:59windows on
23:00floor 2 and then click modify to finish placing the reveal now if we zoom closer and select the reveal
23:08we can see the shape of the profile and it could do with being deeper into the wall so from
23:14the
23:14properties palette we'll change the offset from wall parameter to be 2 inches and this will then move
23:21it further into the wall creating a deeper reveal now we'll align the top of the reveal to the bottom
23:30of the windows on floor 2 so to do this we'll go to the modify ribbon tab from the modify
23:37panel we'll
23:38click the align tool we may need to use the tab key to cycle through the planes to select the
23:44underside of
23:44the window and we'll use this as the reference and then we'll click the top of the reveal to align
23:51it
23:51to the underside of the window
23:56now we'll add the reveal onto the side walls so zooming out and then selecting the reveal
24:02choose add remove walls from the modify reveals ribbon tab
24:07and then we can select the two side walls and then that will add the reveal into those walls and
24:12we
24:12can see it going along at the same level for those side walls there
24:19now we'll copy the reveal up to the top of the window and it will be easier to do this
24:23in an elevation
24:24view so we'll open up the east elevation from the project browser now we can zoom into that end wall
24:32and
24:32we can see where we've placed our first reveal so we'll select this and then from the modify ribbon tab
24:39we'll choose the copy tool and then we'll choose the bottom of the reveal as the base point to start
24:46copying it from and then we can move our cursor to the top of the window and snap to that
24:51and then that
24:52will copy the reveal up so that the bottom of the reveal is aligned to the top of the window
24:59so next we'll pick both reveals and copy these up to the windows above so using the control key to
25:06select both of those we can then select copy again from the modify ribbon tab and then we'll click the
25:13top of the window as the base point and then we can move up to the windows above and select
25:19the same
25:19top line of the windows and we'll copy those reveals to the rest of the windows there
25:26the architectural column can also be used as the decorative encasing to a standalone structural
25:31column and if i zoom into the column at the top right corner of the plan here we can see
25:37we have
25:37a concrete column which is built into the complex external wall if i select the column we can see
25:44it's the 12 by 12 inch concrete rectangular column type this has been positioned so that it's recessed into
25:52the external wall in line with the cmu layer with the external finishes continuing past the column
25:58and we would like the internal finishes to encase the column however at the moment they run through
26:04the column which makes it appear as if they stop either side of the column so we'll use an architectural
26:11column joined to the wall to extend these finishes around the column and as we've seen the concrete column is
26:1812 by 12 inches the finishes for this wall are three inches thick so therefore we will need six inches
26:25bigger than that to allow for the finishes on both sides so let's go to the architecture ribbon tab and
26:32from the build panel under the structural column tool we'll choose to place an architectural column
26:37looking at the type selector we have the 24 by 24 inch column so we'll choose the 18 by 18
26:44inch type
26:45and now we can place this by just snapping to the center of the column or the intersection of the
26:51grid lines here
26:53and straight away we can see that it inherits the finishes of that external wall
26:57and they're now extended around the outside of the column to give us the encasing detail that we want
27:05so next i'll choose zoom to fit from the navigation bar so we can see the whole plan again
27:12and now zooming into the middle of the area where the petitions are we can see that we have some
27:19steel
27:19columns placed and ideally we would like the partition finishes to encase those columns
27:27so once again we'll go to the architecture ribbon tab from the build panel under column we'll choose
27:32the architectural column we got the 18 by 18 inch column selected so we'll click to place that in
27:39the middle of the column here and again we can see those finishes be inherited by the column and follow
27:45around the outside however they are a little bit big so let's select the column and then from the
27:52properties palette we'll choose edit type to access its type properties we'll then click duplicate to
27:59create a new version and we'll name this 16 inch by 16 inch then click ok to accept that new
28:07name and
28:08create the new column and we can see we have the parameters here for depth and width so we'll change
28:13each of these to be 16 inches and then we'll click ok and we can see that new column type
28:25applied to the
28:26one that we already had placed and the finishes are now closer to the column as we want for this
28:31detail
28:32so now we can just copy this architectural column across to the next so with it selected from the
28:37modify columns ribbon we'll choose the copy tool and then we can snap from the middle of the steel column
28:42to the middle of the next steel column and again as soon as it's placed we can see those finishes
28:48be
28:48inherited once more and now zooming out a little we can see we have this masonry wall which spans the
28:56entire width of the building and although it does have a pillar in the middle of it we do need
29:01to add
29:02one more either side of this to strengthen it and make it structurally more stable
29:10so once again from the architecture tab we'll choose to place the architectural column
29:15and this time we'll choose the 18 by 24 inch one and now as we go over the wall we
29:21can use the spacebar
29:22to change its orientation we could place it aligned to the edge of the wall so that it was thicker
29:27on
29:28just one side but we'll place it centrally and then we can see that it inherits that masonry material
29:34and extends out to give us the pillar in the middle of the board so now we just need to
29:41make it central
29:41along the length of that wall so we'll go to the annotate ribbon tab from the dimension panel we'll
29:47choose the align dimension tool and first we'll select the center of the column we've just placed
29:53so then we'll select the grid line in the middle and then the grid line above or the center of
29:58the
29:58column then once we have those we can click to place the dimensions down and now we'll click the
30:05equality toggle for these dimensions and this will set them to be equal which in turn will mean that
30:12the column will be equally spaced between the middle grid line and the upper grid line that we selected for
30:18the dimensions so now we just need to copy this column down to the wall below so we'll select it
30:27first
30:28and then from the modify columns ribbon tab we'll choose the mirror pick axis tool
30:34and then we'll just need to click on the middle grid line and then the column will be mirrored
30:39into position on the wall below so finally we'll just delete the dimensions that we created as we
30:46don't need those in the plan so we'll select those and then from the modify ribbon tab we'll just choose
30:52the delete tool and we'll be given a warning that we cannot ignore and this tells us that the dimension
30:58had the quality constraint toggled on and if we delete the dimension the equality constraint will remain
31:04and if we choose ok let's