00:09We're now going to add some offset alignments to our design centreline alignments.
00:15Offset alignments are generally used to create geometry for road channel lines or adding road
00:20lanes. The advantage of using offset alignments is that they remain linked to the centreline
00:26alignment and can be edited to include changes in offset with transitions. We don't have
00:33to convert polylines or worry about what happens if the main alignment is moved.
00:40Click on McConister Boulevard and on the ribbon choose offset alignment. Offset alignments
00:47are linked to their parent alignment. They'll have an automatic name which you can override
00:52if you wish. Deselect from start and set the start station to zero. We don't want to create
01:00offsets along the existing part of the road which are the negative station values. We'll
01:06create one offset on the left and one offset on the right. Both will be set to 12 feet from
01:12the centreline. At the bottom of the dialog set the alignment style to offsets and set the
01:21label style to no labels. Click on the widening criteria tab. Here you can add automatic widening
01:32around curves. This will adjust the offset alignments to create flared widening around the curves based
01:39on standards defined in a design criteria file or by specifying manual widening. Don't select
01:48these options. Deselect use design check set. On the create offset profile tab we can tell
01:58Civil 3D to create offset profiles for our offset alignments based on a design centreline profile.
02:04We're using McConister Boulevard layout 1 profile. We can superimpose these offset profiles onto an existing
02:13profile view. Change the superimpose onto profile view to McConister Boulevard 1. This will draw offset profiles in that view.
02:27The profiles can be generated with a crossfall from the centreline profile as our road will be crowned. Set the
02:35cross slope to minus 2%.
02:38Each new profile will be given an automatic name. Set the profile style to basic and click OK.
02:50The offsets have been added to the drawing and can be managed from Prospector. In Prospector expand alignments and expand
02:59offset alignments.
03:02Expand on offset alignment and expand to profiles. Here you can see that it has created a profile for the
03:09offset alignments.
03:13When we create offset alignments they are linked to the main centreline alignment. If we move the centreline,
03:19the offset alignment bands can be added to a profile view to show information about the stations, existing ground and
03:26design elevations and the design geometry.
03:29The design information can include both horizontal geometry from the alignment and vertical geometry from the profile.
03:38Other types of bands can show pipe network information. In some bands we want to reference information from the ground
03:46surface as well as from the design.
03:48For example, we might want to show depths of cut or fill. For this reason, a data band can reference
03:55information from two profiles.
03:57These are referred to as Profile 1 and Profile 2 in the data band.
04:03Data bands typically show information at the major grid interval of the profile view.
04:08However, we often want to see additional information at critical points on the design, where the horizontal or vertical geometry
04:16changes.
04:18These critical points are always provided by Profile 1, so in the bands we are using, Profile 1 always references
04:26our design profile.
04:29A selection of data bands can be grouped together in a band set, which can then be applied to a
04:35profile view.
04:39We are going to add some data bands to this profile view. Click on the profile view, right click and
04:45go to Profile View Properties.
04:48In the Profile View Properties, go to the Bands tab. There is a band already assigned in this view, so
04:56select it and delete it.
05:01The bands are organized by the data types they reference.
05:06Profile data for stations, elevations and depths.
05:10Vertical geometry for profiles.
05:14Horizontal geometry for alignments.
05:19Super elevation data.
05:22Sectional data for cross section information.
05:26Pipe and pressure pipe data for pipe networks.
05:30Cant data for rail.
05:33And speed information.
05:36First, we want to add a data band to show our station values, so select Profile data for the band
05:42type, and for the band style, select Station Vertical.
05:48Bands can be added to the top or bottom of the view.
05:52Make sure the location is set to bottom, then click Add.
05:57Additional labels can be added to the band at selected geometry points.
06:01In the Geometry Points dialog, go to the Alignment Points tab.
06:05We can place labels at the geometry points shown.
06:08We don't want to label curve midpoints, so deselect this.
06:12Go to Profile points.
06:15We want additional labels at our design profile geometry points, not on the existing ground.
06:21So make sure Profile 1 is set to the design profile, McCollister Boulevard Layout 1.
06:29Now change the band style to Elevations to add profile elevation information.
06:35Set the geometry points as before, and ensure you change Profile 1 to the Layout Profile.
06:43And add this band to the list.
06:46Click Apply to see the changes.
06:50We now want to add the Alignment Geometry.
06:53Set the Band Type to Horizontal Geometry, and the Band Style to Geometry, and add it.
07:01Profile 1 is disabled for this band, as it will only mark Horizontal Geometry.
07:08Now add the Vertical Geometry using Style Geometry.
07:14Change Profile 1 in the grid to the Layout Profile, and click Apply.
07:21The Horizontal and Vertical Geometry bands have now been added to the bottom of the view.
07:27We should also have added a Depth Band to show amounts of cut and fill.
07:32Set the Band Type to Profile Data, and set the Band Style to Depth, and click Add.
07:39Turn off Curve Midpoint in the Alignment Points, and set Profile 1 to the Layout Profile.
07:48We want this band to be placed underneath the Elevations band.
07:52So with the band selected in the grid, use the arrow buttons on the right to move the band up
07:58the list.
08:01Make sure Show Labels is selected for all of the bands in the list.
08:06Click OK and review the bands.
08:10The Elevation band shows both existing and proposed levels,
08:14and the Depth band shows the difference between these.
08:19Notice that additional labels have been placed at geometry points.
08:25We've reviewed the bands and are now ready to apply these to our other profile view.
08:31We'll do this by creating a band set that we can import to the other views.
08:37Go back to the Profile View Properties.
08:39The default interval for the data displayed on the bands matches the major and minor grid interval for the view.
08:47You can turn that setting off here, and then specify for each band the major and minor interval units.
08:56Save the current list of bands as a band set.
09:01Name the new band set to Road Bands and click OK.
09:06The new band set is added to the list in the settings.
09:11Zoom and pan to the Sycamore Heights profile view.
09:16Call up the View Properties and on the Bands tab choose Import Band Set.
09:21Select the Road Bands and click OK.
09:25The bands are added to the list.
09:27Set Profile 1 for each relevant band to the Sycamore Heights layout profile and click OK.
09:35We've configured our data bands to display relevant information that we can use for our road profile views.
09:41And we've saved them to a band set.
09:44We can now apply our band set to other profile views to provide us with information.