Learn Autodesk Revit Wall Layout, Design, and Editing with this complete step-by-step tutorial. This training covers essential wall modeling and editing tools, from understanding wall properties to creating straight and curved walls, modifying wall layouts, and developing custom wall types with materials.
In this tutorial, you will learn:
- Understanding Wall Properties in Revit
- Creating and Revising Walls
- Creating Straight and Curved Wall Layouts
- Wall Views and Bidirectional Associativity
- Creating and Revising Split Walls
- Fillet Walls
- Wall Alignment Options
- Aligning Walls with Constraints
- Trimming and Extending Walls
- Creating New Wall Types with Materials
- Understanding Wall Functions
- Inserting and Changing Wall Types
Whether you are a beginner or an experienced BIM professional, this Autodesk Revit tutorial will help you improve your architectural modeling skills and understand professional wall design workflows.
Subscribe to Autodesk 786 for more free Autodesk Revit, Civil 3D, BIM Modeling, and Architecture tutorials.
Learn Autodesk software step by step and improve your professional BIM skills!
#AutodeskRevit #RevitTutorial #RevitWallDesign #RevitArchitecture #BIMModeling #WallLayout #RevitTraining #Autodesk786 #RevitModeling #BIM
In this tutorial, you will learn:
- Understanding Wall Properties in Revit
- Creating and Revising Walls
- Creating Straight and Curved Wall Layouts
- Wall Views and Bidirectional Associativity
- Creating and Revising Split Walls
- Fillet Walls
- Wall Alignment Options
- Aligning Walls with Constraints
- Trimming and Extending Walls
- Creating New Wall Types with Materials
- Understanding Wall Functions
- Inserting and Changing Wall Types
Whether you are a beginner or an experienced BIM professional, this Autodesk Revit tutorial will help you improve your architectural modeling skills and understand professional wall design workflows.
Subscribe to Autodesk 786 for more free Autodesk Revit, Civil 3D, BIM Modeling, and Architecture tutorials.
Learn Autodesk software step by step and improve your professional BIM skills!
#AutodeskRevit #RevitTutorial #RevitWallDesign #RevitArchitecture #BIMModeling #WallLayout #RevitTraining #Autodesk786 #RevitModeling #BIM
Category
📚
LearningTranscript
00:09if we click on that our cursor once again turns into a knife we'll see also the similarities
00:17between this and the previous tool by the fact that when we offer our cursor up to the wall we
00:24can't type in the position we can only use the temporary dimensions as our guide but we can edit
00:31that value after we've placed the split so if we click in this position we have now successfully
00:39split that wall into two segments and it hasn't generated a gap because that's it's not this job
00:46we can see that we can select this temporary dimension and change it similar to how we did
00:52it before so if we type in four and hit enter it changes its position if i click on it
00:59again but
01:00this time type in eight for eight feet and hit enter we've now changed the position we're now going to
01:06click modify so we'll click modify to exit the tool we can clearly see that this wall is now been
01:12split
01:13into two separate pieces without any gap so we might want to do that for any number of reasons one
01:20might
01:21be we just want to delete one half of that wall or we maybe want to swap this wall for
01:27an alternative
01:28wall type so with that still selected we could go over to the properties palette type selector
01:35and choose an alternative wall type and we can see it swaps it out instantly so if we just go
01:42up to the
01:42quick access toolbar and click undo that will put it back to how it was now again if we want
01:48to remove the
01:49split we can actually click on either wall it doesn't matter which one and we can click on the circle
01:59the drag control and it rejoins them again as we can see so if we repeat that procedure if we
02:06go up to
02:06the modify walls modify tab and choose split element again and if i click in any place along here now
02:15this
02:15time i don't know where i'm placing it i'm just placing it randomly this time and left mouse click
02:21choose the modify tool once again up on the ribbon and i'm just going to zoom out a little bit
02:28by using
02:28the wheel mouse again now i want to reposition it but there's a technique we have to now use
02:37if we hover our cursor over the split line so to speak and on the keyboard keep hitting not holding
02:46it down but punching or tapping whatever expression you want to use we tap the tab key and we can
02:53see
02:53eventually that i'm able to see just the split line highlighted so if we click on that we can now
03:01select
03:02the temporary dimension and type in an alternative length so that was hovering over the split line
03:10using the tab key repetitively you just keep pressing it and pressing it and eventually it will cycle
03:16through and highlight just the the split line okay once again we'll join the two walls so if we click
03:25on
03:25either of the two walls click on the circle drag control the circular drag control and that's now
03:32rejoined it now as i said from the very beginning we can use the split element tool so if we
03:38repeat that
03:38tool so if we go up to the modify tab modifier panel and choose split element we can actually pick
03:47multiple times as you can see so there's nothing to stop us from clicking and clicking and clicking
03:52and if we choose modify this time up on the ribbon we can see that this wall has now been
04:00divided up into
04:02three sections so once again it could be used for deletion purposes or we could swap the wall out for
04:09an alternative we'll choose delete this time so if i right click and choose delete we'll see it removes that
04:17in a segment now if that's something we know we want to do we can instruct the split element tool
04:25to
04:26perform that automatically for us so i'm going to use the wheel mouse again just to pan down slightly
04:32and what we'll do is we'll split this wall in two places and instruct the split element tool to remove
04:40that in a segment so again we go up to the modify panel choose split element and on the options
04:49bar we
04:50enable the delete in a segment checkbox so if we left mouse click in there so we see a tick
04:56in there now
04:57and now if we pick two known places along the wall it automatically and we'll position our cursor over the
05:07bottom corner of this layout and using the wheel on the mouse we'll roll it to zoom in
05:15it is our intention to apply a curve or a fillet between two adjacent walls it's essential to remember
05:24at this point that the fillet command is in fact not a modify tool if we were to go up
05:30to the modify tab
05:31on the ribbon and click on the modify tab and look within the modify panel we will not find anywhere
05:39within this panel or anywhere else within this tab the fillet command instead it's a draw tool and can
05:47only be found within the draw panel up on the ribbon whilst within the wall tool in this instance a
05:54useful
05:54procedure that we are going to incorporate is by using the create similar tool which can be activated
06:02while selecting an existing element so if we click on this wall element up on the contextual ribbon now
06:10within the modify walls tab within the create panel we have access to create similar
06:18color by using this tool this will ensure two things one the contextual tab and draw panel containing
06:27the fillet arc tool will automatically be available and number two the curve we are about to add
06:34will be the same wall type as the existing walls we'll proceed and from the draw panel select the fillet
06:42arc tool
06:43and we'll begin by clicking the right wall the vertical wall first and the lower horizontal wall second and as
06:55we move our cursor
06:57we can see that we're applying a curve a fillet arc between the two adjacent walls so if we now
07:07click
07:08click we can see the flip control arrows are on the outside of the building indicating the external face
07:15and we can also click on the temporary dimension to change that to a radius of our choice so if
07:23we type in
07:24six for six feet that will now automatically change we could however have having chosen the fillet arc tool
07:34we could have set the radius prior to selecting the two walls the two adjacent walls and we do that
07:43by
07:43enabling the radius checkbox on the options bar within the radius field type in the desired radius so on this
07:53occasion we'll type in two for two feet and we'll pick once again two adjacent walls notice i'm picking the
08:03vertical wall on the right and then picking the horizontal wall on the left and that radius that
08:11we added is immediately applied and again note the flip control is indicating the external face of the wall
08:19had we have selected these walls in the opposite direction unfortunately this flip control arrow
08:27would have been on the inside face not the outside face okay to exit the command we choose modify up
08:38on the ribbon
08:39now we'll load the align tool from the modify tab up on the ribbon so if we click on modify
08:45come over to the modify panel in the top left corner of that panel click on align
08:53but before we actually use this tool we'll investigate the options available to us via the options bar
09:00within the prefer list we see that we have these alternatives we can choose from wall center lines
09:08or faces center of core faces of core to get a better understanding of what each of these refer to
09:17let's look at the structure of one of our walls so to cancel the align tool we'll click on the
09:23modify tool
09:24within the modify tab then move our cursor into the graphics area and select one of our external walls
09:33we'll now go over to the properties palette and select edit type and this will bring up the type
09:40properties dollar box we can see we already have a preview but just in case we don't see a preview
09:49that was invoked by clicking the preview button down at the bottom here
09:53so we can see that the preview button will either open the panel the preview panel that is or it
09:59will
10:00close it okay so now look at the structure of the wall we need to come over to the type
10:06parameters section
10:08and adjacent to structure within the value column select edit and we're now in the edit assembly dialog box
10:17and we can now see the layers that make up the overall width of our wall so the option that
10:24referred
10:24to wall center lines is obviously going to be the middle between the external face and the internal face
10:30wall faces will be either the exterior face or the interior face so center of core on the other hand
10:38will be halfway between the two core boundaries that we see here and faces of core will be either layer
10:47five or layer seven so hopefully that gives a better understanding of what those options are the next time we
10:53see them
10:54so we'll cancel out of this data box by clicking cancel and we'll cancel out of here to proceed
11:04we need to deselect the wall that we have selected we'll just click in the left hand face of the
11:11interior
11:11wall to the left hand face of the exterior wall so if we now choose the align tool once again
11:19within
11:19the modify panel top left of that panel and click on align we can see on the options bar we
11:26already have
11:26wall faces enabled so that will suit us for what we want to do the first thing we're asked to
11:33do is
11:33select the reference now the reference will be the face that will not move so if we click on here
11:39we see
11:39this blue alignment line which shows us that that's where we're going to move up to
11:45so the next thing we click will actually move into alignment so if we put our cursor onto the left
11:52hand face of the internal wall it moves into perfect alignment and we can see we have a padlock
11:59which will invoke an alignment constraint if we want it to so it is optional whether we enable it or
12:06not
12:07we'll click on it to lock it and then choose the modify tool to exit the align tool
12:16what we'll now do is see what effect that alignment constraint that locked alignment constraint now
12:24has so if we were to drag this wall to the right slightly we can see that that internal wall
12:34because
12:34it's locked in alignment has moved with the external wall okay i'm just going to undo that so if i
12:43go up to
12:43the quick axis toolbar and click undo that will move it back into its original position we'll reload the
12:51align tool from the modify panel so if we click on align but this time we'll use two wall center
12:59lines
12:59so within the refer list on the options bar we'll click on what's already there and choose wall center
13:07lines this time this upper wall here where my cursor is will be the reference so if we if we
13:17zoom in
13:18slightly and click the center line that is now going to be the reference we can see that alignment line
13:23again there telling us that that is in fact the reference and whatever we click next will now be forced
13:29into alignment so if we click on there we can see that has now moved into alignment again optionally we
13:37don't have to select it we can lock those two walls into alignment so we'll do that if we choose
13:44modify
13:46select one of these walls
13:50and drag it we can see once again they are forced to move together because of that locked alignment constraint
13:59we're going to disable the constraint by clicking on the blue padlock
14:06and once again we'll zoom out
14:10and we'll use the align tool in a very different way this time compared with the method that we've been
14:16adopting the method we've been using enables us to align and lock two elements into position
14:23but this next maneuver will allow us to do a multiple alignment so if i go up and click on
14:31align again
14:33that will give us the opportunity to reconfigure the way that align works via the options bar
14:40and we'll make sure that multiple alignment tick box is enabled and that will allow us to
14:46align multiple things to a single reference our single reference this time will be the center of this
14:55right hand wall and we can now choose each wall
15:03individually and they will all align to that original first wall that we selected again you would have
15:12noticed that each time we clicked on the wall the wall to be moved that is we had the option
15:18to apply
15:19a locked alignment constraint which on this occasion we didn't once again we'll exit the align tool by
15:26going up to the ribbon and modify tab and choose or making amendments to existing wall layouts the objective
15:34of this video is to look at three wall trim stroke extend tools which will make this task easier
15:41one will be used to create a corner with two existing walls a second will trim or extend a single
15:48wall
15:49element to another and finally a third will enable multiple wall elements to be either trimmed or extended
15:56to another we'll begin by opening up an existing project from the recent files page
16:04looking at this layout our tasks are to create two corners here and here then extend a single element
16:14to the external wall followed by trimming a single element to the external wall we'll then follow this
16:23by using a tool which will enable us to trim and extend multiple walls in the center here
16:32the trim tools are found within the modify tab up on the ribbon so if we click on there
16:38within the modify panel and all three trim tools which we are about to look at
16:44are here where my cursor is going backwards and forwards so our first task is to create a corner
16:51so we'll click on trim extend to corner and please note that when you're using these tools trim extend to
16:59corner you always click on the piece that you want to keep so in this case if we click on
17:06this wall
17:07followed by this wall you'll see that the surplus was removed and likewise if we click on this wall and
17:15click on this wall here and not here you can see by the little blue lines indicating what's going to
17:20happen but when we click on there we end up with a corner okay we are now required to extend
17:28this single
17:30wall to here we don't want any trimming to occur on this occasion we simply want it to extend and
17:36not
17:36lose any of the external wall this tool will perform that task so we choose trim extend single elements
17:44the first thing we're required to do is specify the reference element the element that it will trim or
17:50extend to in this case it's going to extend so we click on that external wall
17:55and when we click on this wall it extends to there so the lower half of this wall the lower
18:03section of
18:03this wall we require it to trim to the external wall so once again we select the external wall as
18:10the
18:10reference and select the piece we want to keep and all it does is it trims a single element we
18:20can see in
18:20the center we have extending and trimming to do the tool that will enable us to do that simultaneously
18:29is the trim extend multiple elements tool so if we click on that the first thing we're required to
18:36do is specify the reference which will be the vertical wall so we click on that and then we can
18:42either
18:42click these individually but we have the opportunity here to use a crossing window so if i click in an
18:50empty
18:50space hold the pick button down and drag upwards we have this dotted window and when i release the pick
18:58button it will automatically trim and extend simultaneously an existing project from the recent files page
19:06and using the wheel mouse adjust our view to enlarge what we see
19:13walls are system families and are stored within project files the walls currently listed in the type
19:22selector within the properties palette were created within the project template file that was used to
19:29create this project so there will come a time when none of these are suitable and it will be necessary
19:37to
19:37create new types these like any other system family are created by choosing an existing so in this case an
19:46existing wall duplicating it naming it appropriately and then modifying it to suit we'll click modify to
19:54exit this command now there are two ways in which we could create a new wall type we could either
20:01within the
20:02properties palette type selector choose an existing wall and then choose edit type and duplicate it
20:09or alternatively we can select a wall that already exists in the building and use that to duplicate
20:16and create a new wall type and that's the method that we're going to use so we'll click this wall
20:21here
20:23and in the properties palette click edit type
20:27and to create a new wall type we choose duplicate and we name it appropriately so on this occasion
20:36it will be called eight inch insulated
20:42stud
20:47and click ok
20:50we are now going to edit the structure of this wall so within the type parameters section adjacent to
20:58the structure parameter within the value column we'll click on edit and that will put us into the edit
21:05assembly dialer box and we can see that the wall that we've duplicated has a very simple very basic
21:12structure we're about to add two additional layers and those two layers will become finishes one for the exterior
21:21side of the wall and one for the interior side the way we do that we select the existing layer
21:27which is layer number two and we click insert twice
21:33and you can see we've added two additional layers
21:36layers and we'll reposition layer two to the exterior side by clicking up
21:44and we'll reposition layer four down so that's on the interior side so we can see in here it's clearly
21:52marked out what side represents the exterior side and which side represents the interior side we're going
22:00to allocate function to begin with so for layer one click on structure click on the little drop down
22:07arrow and from the list of available functions we'll choose finish one which is typically used for the
22:14exterior side of the wall for layer five we'll click on structure and again from the drop down list if
22:22we
22:22click on there from the list that's available we'll choose finish two which is typically used for interior
22:29finishes on the interior side of the wall we're now going to allocate material to these layers
22:36so layer one which is the finish for the exterior side we click underneath material on by category
22:43and select the ellipsis button and that will bring up the material browser we are looking for a material
22:50that is called exterior eifs exterior insulation and finish system now we could go scrolling down this list
23:01but alternatively within the search field here we could type in some of the characters we know exist
23:08within that material and hopefully that will give us a list that we can choose from and in this case
23:14it certainly has so if we click on this one here it will be assigned to the finished layer when
23:21we exit
23:22this dialer box and over on the right hand side we can see it's been set up with a predefined
23:27configuration which we could customize but we're not going to do on this particular lesson we'll pick ok
23:34we now move down to the structure layer layer number three click on by category and click the ellipsis
23:41button which again has now appeared the material we're looking for this time is wood stud layer
23:47so once again within the search field we'll type in wood that will filter the list and should make
23:54it very easy to find wood stud layer so a little scroll down at the side here we discover wood
24:00stud layer
24:01and again pick ok and for layer number five which is the interior finish for the interior side of the
24:09wall
24:10we'll click in the material column again adjacent to layer five select the ellipsis button and we're
24:18now looking for a material which is gypsum wallboard so we start typing in gypsum that will now filter the
24:25list once again we click on finishes interior gypsum wallboard and click ok and we now have the materials
24:36assigned we're now going to assign thicknesses the exterior thickness is going to be allocated a
24:45thickness of two inches the structure layer will be allocated a thickness of five and a half inches so
24:54we can type in five and a half inches click anywhere to accept that value
25:01and the internal finish will be configured to be five eights
25:09and again if we click in in an area anywhere within the dollar box we can see that has now
25:15been assigned
25:17as a quick recap we first of all added new layers we then assigned function to those new layers on
25:24one of these
25:25functions drop down lists we saw earlier that we're met with a list of functions some of which have these
25:32bracketed numbers so what do they mean well they are priority cleanup numbers for want of a better expression
25:42the number one is the top priority so that's allocated to structure
25:47two lowest priority three lower and so on so the lowest priority is number five
25:55so what do they do well because i've already said they are cleanup priority it means that when two walls
26:01eventually join together when the layers coincide if two layers of the same number cross over each other
26:11and they share the same material they will blend into one another however if a higher priority number number one
26:20for example
26:21crosses over a lower priority two three four or five then it will cut through those layers and
26:30it will clean up appropriately
26:33if two layers share the same material as i've already said they will blend into each other so two
26:39two layers of the same number share the same material they will blend into each other if on the
26:46other hand one has one material the other has a different material then there will be a dividing line
26:52to clearly differentiate between the two so hopefully that little description has give you an idea of what
26:58those numbers are for they are priority cleanup numbers and if you wanted further advice i'm sure the help button
27:06here would enable you to further investigate or be reminded as to what they do okay let's move on let's
27:14click ok
27:16click ok again and what we see is the wall that we originally selected has now taken on board our
27:24new
27:25wall family our new wall type so you can see it's eight in walls that have yet to be changed
27:31all the exterior
27:32walls and swap them for this new wall type so i'll begin by choosing modify to deselect the existing wall
27:41select one of the walls that hasn't yet been changed we'll click this one over here on the right
27:47right click and choose this technique which is select all instances now we can either tell revit to choose
27:55all the walls in this view or all the walls in the entire project we're going to choose an entire
28:01project
28:02that has now done that and we now go over to the properties palette type selector click on there
28:10and choose our new wall type which was eight inch insulated stud and that would have changed
28:18all the other walls to the identical wall type if we click modify again to deselect the wall so up
28:27on
28:27the ribbon click modify now we can't see those actual layers in our wall at the moment and that's because
28:34the detail level is currently set to course so if we come down here to the view control bar we
28:42can see
28:42that the detail level is indeed set to course if we click on there from the pop-up menu choose
28:49medium
28:50and straight away we can see those layers