Learn Autodesk Revit Wall Layout, Design, and Editing with this complete step-by-step tutorial. This training covers essential wall modeling and editing tools, from understanding wall properties to creating straight and curved walls, modifying wall layouts, and developing custom wall types with materials.

In this tutorial, you will learn:

- Understanding Wall Properties in Revit
- Creating and Revising Walls
- Creating Straight and Curved Wall Layouts
- Wall Views and Bidirectional Associativity
- Creating and Revising Split Walls
- Fillet Walls
- Wall Alignment Options
- Aligning Walls with Constraints
- Trimming and Extending Walls
- Creating New Wall Types with Materials
- Understanding Wall Functions
- Inserting and Changing Wall Types

Whether you are a beginner or an experienced BIM professional, this Autodesk Revit tutorial will help you improve your architectural modeling skills and understand professional wall design workflows.

Subscribe to Autodesk 786 for more free Autodesk Revit, Civil 3D, BIM Modeling, and Architecture tutorials.

Learn Autodesk software step by step and improve your professional BIM skills!

#AutodeskRevit #RevitTutorial #RevitWallDesign #RevitArchitecture #BIMModeling #WallLayout #RevitTraining #Autodesk786 #RevitModeling #BIM
Transcript
00:09begin by creating a new project so within the recent files page below the model section here
00:16we'll click on new and within the new project dialog box within the template file section
00:23we'll click browse and within the list of template files that are now available we'll
00:29choose the default template and click open and then within the new project dialog box we'll click OK
00:39within Revit walls are referred to as system families they are parametric meaning they have
00:46relationships with other elements and automatically update when required they are also known as host
00:52elements for items such as doors and windows some lighting fixtures and sanitary equipment component
00:57families the wall tools are located within the architectural tab build panel if we select the
01:04wall tool fly out we'll see there are other tools which can be used specific to their usage we're
01:10going to choose wall architectural the ribbon changes to its contextual state and the modify wall tab is
01:18now visible within the properties palette type selector we can see all of the available wall types
01:24these were made available via the project template file that we used from the very start as we will
01:32see there are exterior walls internal walls foundation walls and a wall type known as generic the generic
01:41types are typically used for conceptual design we can design the building using these and when we arrive
01:47at the stage where we know what these walls will actually look like they can be swapped out easily we'll
01:53choose from this list exterior CMU on metal stud and before we start actually using that tool we'll
02:01have a look at the structure and the build-up of that wall type so by clicking on edit type
02:06that will now
02:08bring up the type properties dollar box we can see there are a number of type parameters and a preview
02:14window which is available and what we see and how we see it can be altered to the preview window
02:20was
02:21activated by this button down at the bottom so if we click on preview we close the preview window
02:27and if I click on preview again we reopen it we're currently looking at the wall in plan however by
02:35clicking on the view drop down list we can change that to view it as a section rather than a
02:41plan and
02:42we're also able to zoom and pan in here also to see the actual structure of the wall the multiple
02:49layers
02:49that make up the wall within the type parameters area over here within the parameter list if we move
02:56our cursor adjacent to structure within the value column click on edit we now find ourselves in the
03:04edit assembly dialog box what we see are the layers which make up the wall the structure and the finishes
03:12clearly indicated are the external side or exterior side and the interior side we are able to assign
03:20function material and thickness to each layer and at the top of this dialer box total thickness and
03:27thermal property data is present note the core boundary layers and their current location either side of
03:35the structure layer when we begin drawing walls something known as the location line has numerous
03:41alternative settings and these relate to the structure stroke makeup of the wall so hopefully when
03:47enabling those they'll make sense okay let's pick okay to exit this dialog box and then click okay to
03:55exit this dialog box whilst within the level one floor plan view we'll start drawing walls and look at
04:02some of the fundamentals to become familiar with and then we'll finish by drawing a simple architectural
04:07floor plan we're already in the wall tool and we have already looked at some of the parameters over
04:15here in the properties palette but let's focus on them a little bit more detail for example I mentioned
04:21location line earlier and it's here where we have several choices of location line and hopefully being
04:28able to look at those layers you're able to understand what each of these options will do for us we're
04:35going to
04:35leave that set to wall centerline because this is an exterior wall it means that the default behavior
04:41and the top constraint is always unconnected and it was waiting for us to assign a level so if I
04:50click
04:50on this drop down list next to top constraint we can see that we have a choice of two levels
04:56and they match
04:57the two floor plans that are over in the browser I'm not going to change it for the time being
05:03I'm going to
05:03leave it set to 20 feet we also can see up on the options bar that value can also be
05:10edited and we can
05:12also assign levels here also and adjacent to that we could also configure which location line we choose
05:22to use again I'm going to leave that set towards centerline adjacent to that we have something called
05:28chain I'm just going to turn that off and I'll explain in a little bit more detail later on over
05:34here at the end of the ribbon here we can see we're looking at the draw tools so here is
05:41a selection of
05:43various draw tools that can be used when we are actually drawing walls and we're currently set to the
05:49line tool if I begin to draw a wall we can see that as I draw the wall and if
05:57I roll my wheel
05:58just to zoom in slightly but we have an alignment line indicating that we are justified around the
06:05center of that wall and we can also see the temporary dimensions appearing on the screen and we can either
06:13use the preset incrementation that's being provided or we could in fact type in how long we want 55 and
06:22hit
06:22enter on the keyboard we can see that that has entered that value for me and made that wall
06:29the length that we require now notice because I removed the chain tick box up on the options bar
06:36it is not continuing from the previous drawn wall so if I draw another wall and draw on this time
06:45using the
06:45on-screen incrementation I will click to 25 feet once again we see that because chain isn't enabled this
06:54is what is happening it's not actually continuing from the last segment of wall but if I enable chain
07:01this time and draw a segment of all over here if I click move the cursor click move the cursor
07:10we can see
07:11clearly that the second entity the second element I'm drawing is connected to the previous and that
07:19will keep on as long as that chain tick box is enabled to exit the wall tool we simply either
07:29choose escape hit
07:31the escape key on the keyboard or we click modify I'm going to go up to the ribbon and click
07:37modify we are
07:41currently looking at these pre-drawn walls in a detail level of course now if we wanted to see the
07:47actual layers that we know are contained within these walls we come down to the view control bar
07:53click on the detail level pop-up and click on either medium or fine so we'll click on medium and
08:00that will
08:01enable us to see the actual layers within those walls so if I zoom in slightly we can see there's
08:06a
08:06little bit clearer I'm going to revisit temporary dimensions again but this time not while we're
08:13drawing but while we're modifying so if I click on this wall we can see that the temporary dimensions
08:19present themselves and if I wanted to change the position of that relative to the wall that's here
08:25I can click on the temporary dimension type in the the new values let's type in 10 for 10 feet
08:31and we can
08:32see that self adjust so that's the same with all of these walls if I click on there scroll down
08:37a
08:38little bit pan down a little bit I can click on that value there click on the temporary dimension
08:43change that to 25 feet and it modifies it likewise to deselect we can do either of three ways really
08:51we can either click modify up on the ribbon we can hit escape on the keyboard or we can simply
08:57left
08:57mouse click in a blank area and that will deselect for us now when we were drawing these walls and
09:05when we looked at the layer structure of these walls I pointed out that there was an internal face and
09:11external face when we click on any wall we can very quickly identify the external face of any wall
09:19and if you look at this wall we see these two arrows pointing in opposite directions those are known as
09:26the flip controls the flip orientation controls and if I click on there what we've done is we flip
09:33the external face to its opposite side so if I click on there again it flips back and every wall
09:40if I
09:41select it singularly will present its flip control so if I click on here it flips the orientation and if
09:49I
09:49click on here it does the same and if I click in space we've now deselected now if we've got
09:56more
09:56than one wall selected so if I were to select this wall hold the ctrl key down and choose this
10:03wall
10:03we don't actually see those flip controls so if we're aware of the fact that those walls need to
10:10be reversed we can now use the spacebar so if I hit the spacebar on the keyboard and when I
10:17now deselect
10:18those walls and then select one of those individually we can see that we've flipped the orientation of
10:25the wall so I'll do that once more so if I choose one hold the ctrl key down choose the
10:31other maybe
10:32another maybe another and choose another there we are so just use the wheel just to pan across there and
10:41if I hit the spacebar this time deselect and when I select the walls we can see that we have
10:47the external
10:48face here so I have a bit of anomaly here so if I click on this wall hit the spacebar
10:55it resolves that
10:56anomaly and I can do the same here do the same here hit the spacebar and we've now resolved that
11:03anomaly
11:03so all of the external faces are now all on the side that they should be what we'll now do
11:11is zoom out
11:11and delete any walls that are currently on the view so if I click an empty space and drag across
11:20the panel
11:21click on wall we'll draw the following so we'll click here still set to a location line of wall center
11:28line
11:28still set to a unconnected height of 20 feet and we'll start here and click here and if I draw
11:37clockwise
11:38that will guarantee that the in this instance that the external face will be at the top of this wall
11:45rather than
11:46the underside of this wall so if I come across here 10 feet remember I could actually start typing these
11:52values in
11:53if required come down seven feet like so come across eight feet back up now notice and I'll zoom in
12:06that when I'm aligned with other elements in this case the other wall it will show me when I am
12:11so if
12:11I go beyond I don't see that alignment line this is called snapping to remote objects within Revit is
12:19configurable and so if I click there I know that I'm perfectly in line come across type in 10 so
12:26I'm
12:26going to use the direct distance entry method on this occasion come back down type in 20 for 20 feet
12:34come across 10 once again if I want to line up with this wall here I can I'm just going
12:41to go a little
12:42bit beyond it this time let's say to 14 feet come down eight feet
12:50and then come across to here until I'm in line with my starting position so once again it's showing me
12:56that this alignment line when um it's snapping to that remote object so if I left mouse click there
13:04and just to exit the command temporarily I'll hit escape on the keyboard
13:11now because I only hit one escape it means that we are still within the wall tool so on this
13:17occasion
13:17I need to hit a second escape to exit the wall tool whereas if I had clicked on the modify
13:23command
13:24there would have more or less been a one click stop and it would have taken me out of the
13:28wall tool
13:29entirely but we're now going to look at how we can click and drag these walls so again we can
13:36keep
13:36an eye on the temporary dimensions once the wall is in the position we require so that's a click and
13:42drag maneuver as we can see and I'm going to show how if I drag two walls that become perfectly
13:49aligned
13:50with each other when I release so the alignment line is showing me when that's happening if we look
13:56the other wall there's an alignment line a dashed alignment line showing when I release there is a
14:02padlock that becomes available and that enables me to lock the alignment so that's a locked alignment
14:09constraint and that means that those two walls now will be forced to move together so if I were to
14:17click
14:17and drag this wall over to the right we can see that the lower wall is forced to go with
14:24that because
14:24we have locked and aligned those two wall elements together and that's something that we can do
14:31throughout Revit if we no longer want that locked alignment we simply click on the padlock and now
14:39they are free to move independently of one another again we'll now click in an empty space to deselect that
14:46wall segment we're now going to draw a curved wall so we need to activate the wall tool again so
14:53we could
14:54simply go up to the architecture tab build panel and click on the wall but if it's essential that
14:59the wall we now want to draw with is the same as the existing walls we can use a tool
15:05called create
15:05similar and it becomes available by us first clicking an existing wall so if I click any one of these
15:13walls
15:14and we can either gain access to this tool up on the ribbon within the create panel and there it
15:19is
15:20is called create similar or alternatively we can right click anywhere and within the right click menu
15:28choose create similar in here and if we cast our eye up onto the ribbon now we can see that
15:33we're
15:33not only back in the wall tool but at the top of the properties palette we're using exactly the same
15:39wall type that we've already drawn and is visible on the screen so I'm now going to come up to
15:45the draw panel
15:46up on the ribbon and select this tool which is start end radius and because of the clockwise nature of
15:56rivet that I want the external face to be on this side I'm going to start at the bottom here
16:03click there
16:05come up to the upper wall and click on there and then simply just move the cursor over to the
16:11left until
16:12I obtain a full semicircle and it's showing me that the radius of that to the center will be 14
16:18feet so
16:18if I just left click there I've now generated that wall and you can see that it's actually used exactly
16:25the same wall type as before due to the create similar tool really powerful function within revit
16:32we'll open up two other views tile those views and start editing the walls and see how
16:39revit allows us to edit in one view while updating the other views so we're currently in the floor plan
16:47level one we'll open up our south elevation so if we come over to the browser the project browser that
16:54is and double click on south that now opens that that up for us and if we open up the
17:01default 3d view
17:03now if we look in our browser that doesn't exist so we need to go up to the view tab
17:07and within the
17:09create panel single click on the 3d view icon and you can see when I hover on that it says
17:15default 3d view
17:17so we now have we can see at the top of the view here top of the graphics window that
17:22we have three
17:23views that are currently open in here now in my 3d view we're able to see the the level lines
17:31and I don't
17:31want to see those so we're going to go up to the view tab which is already active and within
17:36the graphics
17:37panel we'll click on visibility graphics and because levels come under the annotation categories
17:44we'll click on annotation categories scroll down and we'll turn off levels so I'm just rolling the
17:51wheel on this occasion so you can use the wheel on your mouse to scroll occasionally and if I uncheck
17:56the
17:56levels tick box here and click ok we can see that those level lines have now been removed now if
18:04I
18:04want to tile those three views so I want to see those together that's also available on the view tab
18:10and that's up here in the windows panel and if I click tile views we're now able to see the
18:18three views
18:18being tiled but I can't see all of what I want to see in each of those views so a
18:23useful shortcut to
18:25remember here is one called zoom all to fit and the shortcut is z a so simply by typing in
18:33z a without
18:34no enter no return or enter key and we can now see all of those views all those walls I
18:40should say
18:41quite clearly so if I zoom into here and zoom into here we can see those elements very very clearly
18:50so what I wanted to demonstrate to you was what will happen if I start modifying walls in either
18:56one view or the other so starting in the plan view if I click this wall here we can see
19:02quite clearly in
19:03the 3d view that that wall has now become selected as we can see like so so if I edit
19:09that it also updates
19:11the the other view and if I click in space that will deselect if I in this view click the
19:18lower wall
19:19we can see in front of us in both the south elevation and the 3d view that those two walls
19:26are now selected so if I were to move that wall delete that wall change it to an alternative wall
19:31it will actually edit in all three views so I'll just simply drag it down a little bit
19:37and we can see that that is updated did you see the parametric nature of this curved wall that
19:43it also changed as I drew that wall as well what we'll also do I'll do this in the 3d
19:51view
19:51I'll select all of the the walls now if you're going to move from view to view it's important that
19:57you left mouse click to activate the view and then select the walls that you're about to edit
20:03so if I click on that that will show me the parameters again within the properties palette
20:09and this time what I'm going to do is instruct Revit to don't leave that at 20 feet this time
20:17I'll set it to 15 feet and when I move my cursor into the graphics area we'll see that in
20:23the two views
20:24both the 3d view and the south elevational view that modification was carried out
20:29if I associate it to a level this time so it's currently unconnected so I'll associate it to level
20:37two this time and move my cursor in that will mean that if I adjust the elevation of that level
20:47because
20:48these walls are now currently constrained to those levels they are forced to move with them so we can
20:55see that the wall is not only constrained at the top but it is also constrained at the base so
21:03if either
21:04of those two were to move any walls associated to those levels will actually move as well so I'll
21:11demonstrate that again so if I just zoom in a little bit click on the level line using that little
21:16control
21:17here this little circular control I can drag that a little bit closer to the wall there so we can
21:24see it quite clearly so I can drag those look like that there we go if I change that to
21:3018 feet
21:32we can see that any walls associated to that are automatically forced to go with that so if I click
21:40on there again and this time change it to let's say eight feet
21:49the level line changes and we can see that the walls are forced to respond existing wall segment
21:59we'll see that both tools can create a break at a single point albeit one with a gap
22:03we'll then reuse the split element tool to specify two points along a wall segment
22:10and remove the inner segment between them we will also look at editing the split either tool creates
22:18we'll begin by opening up an existing project
22:23the first tool we'll look at is the split with gap tool it's commonly used for creating expansion
22:29stroke thermal movement gaps within walls or gaps between panels for cladding this tool can be found
22:37within the modify tab modify panel and it's up here in the top right corner so if we click on
22:44split with gap
22:46we notice that our cursor changes to look like a knife the actual width of the gap is determined over
22:53here on the options bar within the joint gap field we can see it set to four inches if we
23:01move our cursor
23:01over any wall we'll see that it's showing us where it's actually going to put that split with a gap
23:08the
23:09dimensions that appear we can't actually type those in while replacing the gap but we can edit it afterwards
23:16so if we click here and while we're still in the tool we can actually pick on the temporary
23:22dimension and alter that we can change that if we type in six for six feet and hit enter you
23:30can see
23:31we've changed it if we click on it again change it to four feet like so if instead we wanted
23:39to reference
23:39the other side the other wall let's say this wall here we can while that temporary dimension is still
23:46visible and we're still in the tool we can drag the witness line so if we left mouse click and
23:53drag it
23:54to the other wall when i let go of the mouse button it places that dimension so if we click
24:00on the
24:00dimension this time we'll type in six and hit enter and we can see we've altered it okay we'll exit
24:08the tool
24:09by selecting modify up on the ribbon so we'll click on modify and using the wheel on my wheel mouse
24:15we'll
24:16zoom in if i hold the wheel down we can pan that into the center and we'll have a little
24:22look at this
24:23gap in more detail so if we click on either of these walls we'll see that we have two padlocks
24:29and this
24:30little shape that looks like a t on its side we'll investigate what they're doing this padlock here
24:37is maintaining the length between the two walls it's maintaining the gap in other words this padlock
24:45here is maintaining the alignment between the two walls so if we were to drag one of these walls up
24:53or down we can see that the other wall is being constrained to move with it alternatively if we wanted
25:02to move the position of the gap we can use this circle here the drag control and if we click
25:09horizontally either to the right or to the left we can see that the gap is being maintained by this
25:17icon
25:18here now if we at some stage later on wanted to remove the gap we would have to first of
25:27all unlock
25:28this constraint the one that's maintaining the length between the two walls the gap between the
25:34two walls and that brings us on to this t-shape on its side when we hover over that that
25:41is called
25:41allow join so if we click on that one and then select the adjacent wall and click on its allow
25:50join icon
25:52they come together but they don't actually become one continuous wall segment to achieve that
25:58so if we click on that we click on the blue circular drag control and that now makes that wall
26:04one

Recommended