00:10Profiles and Profile Views
00:13We now need to design the proposed levels and geometry for the vertical alignment of our road.
00:20We need to create a design profile.
00:23You can locate the profile view you wish to work in using Prospector.
00:28Expand Alignments, then expand Centreline Alignments.
00:33Under the McAllister Boulevard alignment, expand Profile Views.
00:38Right-click on the profile view and choose Zoom To.
00:44Here we have the profile view, showing the existing ground profile along the alignment.
00:51We've added some circle markers on the profile view to help you when you're creating your design profile.
00:56On the Home ribbon, go to Profile, then Profile Creation Tools.
01:02Click on any part of the profile view to set the view you want to work in.
01:07The alignment we're working with is shown here.
01:10The profile will be given an automatic name.
01:13It will be called McAllister Boulevard, Layout and the next counter.
01:18We can overwrite this with the name of our choosing if we wish.
01:22Choose the profile style Design Profile and we'll accept the complete label set.
01:29Click on the Design Criteria tab.
01:32Select Use Criteria Based Design and use a Design Criteria file.
01:38In our case, this is set to the AASHTO 2011 standard.
01:43We're going to choose our Design Check Set of Collector, as this is the class of road we're designing.
01:50Click OK.
01:53The Profile Layout tools are very similar to the Alignment Layout tools, except that these
01:58can only be used for a profile.
02:01The first section is for creating by intersection point method.
02:05We lay out tangents and it will place curves automatically.
02:08You can add and delete intersection points and you can move an intersection point.
02:15Here we have individual lines and curves of different types.
02:19They're divided into three types, fixed, floating and free.
02:25A fixed entity is one that is fixed by points and doesn't move when attached entities are moved.
02:31A floating entity is attached at one end to another entity and floats off of it.
02:38It will adjust when the attached entity is edited.
02:43A free entity is one that is attached to other entities at both ends.
02:47It's free to move when those attached entities move.
02:53On this button, you can convert AutoCAD lines and splines to profile entities.
03:00We can enter intersection points in tabular form.
03:05We can raise or lower all of our intersection points.
03:10And we can copy a profile.
03:14These buttons here allow us to view individual intersection points or entity properties.
03:21This button will extend an entity to the extent of the profile view.
03:25We sometimes need to do this to enable our curves and tangents to connect beyond their drawn endpoints.
03:34Here you can delete entities.
03:38And this button calls up the profile grid view, which allows you to edit the entire profile in tabular form.
03:48The start of McAllister Boulevard up to station zero is part of the existing road.
03:53And so to continue this road, we need to match these levels for a smooth transition.
03:59You will snap to the circle markers on the existing ground profile to determine the starting tangent for our design.
04:07From the layout tools, under Lines, choose Fixed Tangent Best Fit.
04:14It will be a fixed tangent because there are no entities to attach it to.
04:20We're using Best Fit because we want to find the best line that fits through our ground points.
04:27Choose the method by clicking on the screen.
04:31Turn on your O-snaps.
04:36Snap on each circle in turn and then press Enter when they've all been selected.
04:42The regression data shows you the station and elevation of the picked points
04:47and the offset between these points and the calculated Best Fit Tangent.
04:54You can exclude points from the selection.
04:58And you can tell it to pass through a point.
05:01We want the tangent to pass through the last point we picked.
05:07Click Save and the tick to dismiss the dialog.
05:13We've now placed the first tangent.
05:15We now want to place a curve from here that goes through the next circle marker.
05:21We'll use a floating curve parameter through a point.
05:25It's floating because it's attached at one end.
05:30Zoom in and pick the end of the first tangent.
05:36Accept the default K value and then snap to the center of the circle.
05:42This will place our first curve.
05:45We're now going to go across and add the last tangent.
05:55Use Fix Tangent two points.
05:59Snap to the two circle markers in turn.
06:02The warning marker here shows that the tangent doesn't meet our minimum grade defined in our design checks.
06:10We'll fix this issue later.
06:15The order in which you lay out your design may depend on personal preference
06:19or on the design constraints that you need to work in.
06:24We're now going to place a curve from our floating curve to our fixed tangent.
06:30Because it will be attached at both ends it will be a free curve.
06:35Choose Free Vertical Curve Parabola.
06:40Pick the end of the first curve and then the start of the fixed tangent.
06:46On the command line we could specify the curve by entering a K value, a radius, a length or by
06:53picking a pass-through point.
06:56Select Pass-through and try to snap to the center of the circle marker.
07:01You may find that the curve disappears as you try to do this.
07:05This is because the end point of our first curve doesn't extend out far enough for the connection to be
07:11made.
07:13Press Escape to cancel the command.
07:15And then on the toolbar choose Extend Entity and pick the end of the curve.
07:21Now we can add our free parabola again but this time picking the curve extension and then the tangent.
07:28Now it will allow us to snap to the circle marker and the curve completes our design profile.
07:36We can view the profile in tabular form using the grid view.
07:43Here we can see information about our design profile.
07:47Values that are not grayed out can be edited.
07:50This will depend on whether entities are fixed, floating or free.
07:56We know that the last grade on our profile doesn't meet our standards.
08:03We can locate this in the last row under Grade In.
08:08We'll change the grade in as we want to keep the end point fixed.
08:12Change it to 0.5%.
08:16This fixes the warning on the tangent.
08:20Close the grid view.
08:23We've now completed the design of the McAllister Boulevard profile.
08:27We'll need to create similar profiles for the other alignments and then edit them.
08:32We're trying to edit the McAllister Boulevard profile so that we can meet our design standards.
08:38You can see by reviewing the warning symbols that this curve is too short.
08:42It should be a minimum length of 350 feet.
08:48Similarly, this curve is also too short.
08:50It doesn't meet the minimum K value of 115.
08:56We're going to carry out some edits graphically to adjust these curves.
09:01Select the design profile and zoom into the second intersection point.
09:07Select the intersection point grip and snap it to the guide circle marker.
09:14We're creating a larger gap between our curves to give us more room to adjust them.
09:21Now use the right hand circle grip on the end of the curve and drag it out towards the right
09:27hand side as shown.
09:30You can see that the curve warning has now disappeared.
09:34Pan across to the start of the profile.
09:38Using the left hand circle grip on the first curve, we'll drag it to the left, as close to station
09:45zero as we can.
09:48The warning on that curve has now been fixed as well.
09:52You may need to make your own adjustments to resolve these warnings.
09:56Pan across to the right hand end of the profile.
10:01Here we can see that the ending grade is only 0.24% and doesn't meet our minimum requirement of
10:080.5%.
10:10Also, at this end we need to tie our profile levels into the edge of the roundabout on Sycamore Street.
10:16We'll not be able to carry out these edits graphically, so we'll use the layout tools.
10:21Select the profile and from the ribbon click on Geometry Editor.
10:26In the layout tools, use the add intersection point button and snap to the surface profile at the edge of
10:32the roundabout.
10:34Now we'll use the profile grid view to edit the gradient of the tangent.
10:41Open the profile grid view and look down the Grade In column.
10:48The grade we need to edit is now set at 0.25%, but we need it to be 0.5%.
10:55We're editing Grade In as this will hold the end of the tangent fixed and move the start of the
11:01tangent.
11:02Type in 0.5.
11:05You can see the new grade update on the screen and the warning marker has gone.
11:10Now that we've resolved the McAllister Boulevard profile, we can look at Sycamore Heights.
11:15Use Regen to display the warning markers.
11:19Here we can see the curves are too short and tangent grades are too shallow.
11:26Before we start adjusting these, we need to make an edit to the alignment in Plan.
11:30Pan across to the start of the Sycamore Heights alignment.
11:35You can see here that it doesn't quite meet the McAllister Boulevard.
11:41Use grips and a nearest snap to place the start of the alignment back onto McAllister Boulevard.
11:48Go back to the profile view.
11:51Because of the edit we've just made, the alignment and also the profile will now be slightly longer.
11:58Civil 3D has adjusted the profile to meet the new alignment length, but in doing so, the position of our
12:05intersection points may have changed.
12:08Use a Regen to refresh the warning symbols.
12:10If you hover over one of the circle warnings, it tells you that a horizontal geometry change may have affected
12:17the profile and advises you to check it.
12:21We can dismiss these warnings by selecting the profile and use Dismiss Notifications on the ribbon.
12:28At the left hand end of the alignment where it meets McAllister Boulevard, we need our design profile to meet
12:35the levels of the McAllister Boulevard profile to tie the two roads in.
12:39I'll demonstrate this by adding a marker to the McAllister Boulevard profile view.
12:45I'm going to add a profile crossing marker to the view.
12:49This will enable me to see where the Sycamore Heights design profile level is in relation to McAllister Boulevard.
12:57I'm going to select the Sycamore Heights alignment in Plan and add a marker for the Sycamore Heights layout profile.
13:04Now in the profile view, you can see a label and a marker that shows where the current elevation of
13:10Sycamore Heights is in relation to McAllister Boulevard.
13:13It's clearly too low.
13:17Back in the Sycamore Heights profile view, we're going to carry out the same procedure, adding a profile crossing marker
13:25for McAllister Boulevard.
13:27Select the profile view and on the ribbon under Launch Pad, choose Add Crossings to Profile View.
13:34In Plan, pick the McAllister Boulevard alignment and press Enter.
13:40We're adding labels for McAllister Boulevard where it meets Sycamore Heights.
13:44For each profile, we have a marker style and a label style.
13:50Note the elevation options are set to Use Object.
13:54It will get the elevation of the marker from the profile.
13:58We don't need to display the existing ground marker as we already have that drawn as a profile.
14:03We only want to mark the elevation from the design profile.
14:07So deselect McAllister Boulevard, but select the Design Profile Layout 1.
14:15Click OK and go back to the profile view.
14:19In the view, the marker has been added, but it's labeled twice, once for the alignment and once for the
14:24profile.
14:26Delete the uppermost label.
14:29Also, delete the lower Grade Break label so that we can see the crossing marker more clearly.
14:36The marker shows that we need to move the profile up.
14:41Using the grips, snap the end of the profile to the end of the marker.
14:46Now our roads tie in.
14:49Pan across to the first intersection point and drag it up as shown.
14:56This will help to reduce the amount of material fill required for the road in this area.
15:03Drag the curve end out as shown.
15:06Pan across and move the second intersection point up halfway towards the ground.
15:14At the end of the profile, we need to tie the road in to Sycamore Street.
15:18The short straight at the end of the surface profile is the crossfall of the road.
15:25Using the layout tools, add an IP at the edge of Sycamore Street.
15:30Finally, we'll resolve the curve warnings using the profile grid view.
15:36Edit the K values in the table that are showing errors.
15:41Set them to 357 as required by our standards.
15:46Make sure there are no remaining warnings shown in the grid view.
15:52We have seen how we can use a mix of graphical editing using grips and the layout tools with the
15:58profile grid view to adjust our design profiles, address all of the standards checks we have in place and tie
16:06our road elevations together.
16:08A quick look at the McAllister Boulevard profile view confirms that Sycamore Heights is now at the correct
16:14elevation.