Learn How to Create Alignments by Layout and Edit Alignment Geometry in Autodesk Civil 3D 2026 with this step-by-step tutorial. In this video, you will learn how to create horizontal road alignments, use Alignment Layout Tools, edit alignment geometry, modify tangents, curves, and improve road alignment design.
This tutorial covers essential Autodesk Civil 3D Alignment Design tools used in Road Design, Highway Engineering, Transportation Infrastructure, and BIM Projects.

📚 Topics Covered in This Tutorial:

Create Alignments by Layout in Civil 3D
Create Horizontal Road Alignments
Use Alignment Layout Tools
Edit Alignment Geometry
Add and Modify Tangents
Create and Edit Curves
Modify Alignment Properties
Understand Horizontal Alignment Design

Who Should Watch?

Civil Engineers
Highway Design Engineers
Road Design Engineers
Civil 3D Designers
BIM Modelers
CAD Technicians
Infrastructure Engineers
Civil Engineering Students

LEARN AUTODESK CIVIL 3D

Subscribe to Autodesk 786 for free Autodesk Civil 3D tutorials, complete courses, practical exercises, road design, highway design, BIM modeling, and infrastructure engineering workflows.

Like, Share & Subscribe for More Professional Civil 3D Tutorials!

#Civil3D #AutodeskCivil3D #Civil3D2026 #AlignmentDesign #CreateAlignment #EditAlignmentGeometry #RoadDesign #HighwayDesign #HorizontalAlignment #BIM #CivilEngineering #InfrastructureDesign #Autodesk786
Transcript
00:09We brought CAD entities into an alignment, but there are times when we don't have a full
00:14alignment in a drawing to convert. Sometimes we just want to lay out the alignment freely
00:19in the model using background CAD entities to guide us.
00:24The Alignment Layout tools allow us to create an alignment by drawing individual entities
00:29and joining them up. We can control how they are constrained and we can edit, add and delete
00:35entities at any time.
00:39Using the Layout toolbar we can create an alignment by picking intersection points. Curves can be
00:46added automatically at each intersection point. We can add an intersection point, delete an
00:55intersection point and we can break apart an intersection point. When we break the intersection
01:03point apart we have two independent tangents which we can then move individually. We can
01:10use the Delete button to delete any of the entities from our alignment. We can also create an alignment
01:18alignment by laying out individual entities such as lines and curves. On the toolbar we
01:24have a button for lines, curves, floating lines with spirals, curves with spirals and compound
01:32lines and curves with spirals. Individual entities are divided between fixed, floating and free.
01:40A fixed curve, for example, is one that is fixed by the points you pick. When you add a fixed
01:47entity it will constrain other entities that you attach to it. A floating entity is one that's
01:54attached at one end to another entity. It floats from it. For this floating line, notice that
02:01the curve stays fixed in place and the tangent line moves and is constrained and remains tangential
02:07to the curve. If I add another fixed line then we can add a free curve between these. A free
02:14entity is one that is attached at both ends to other entities and is free to move when
02:19they move. When you add a free curve you need to choose the included angle. If we choose greater
02:26than 180 then we get a curve that loops around like this. If I choose less than 180 then the
02:34curve
02:34will be the shortest curve between the two tangents. On the alignment layout toolbar we can use the
02:43alignment grid view to review the tangency constraints that we applied to our entities.
02:48We can edit the constraints in the grid view and change them. Fixed entities, for example, can be changed to
02:56the floating or free entities. We can look at the parameters of individual entities using the subentity editor and
03:04review or edit them. We use the select subentity button to switch between entities. We can add AutoCAD lines or
03:13arcs to our alignment.
03:15If I draw an arc in the opposite direction to the alignment and then add it, when I try to
03:20join this up with a free straight,
03:22you'll notice the application reports no solution is found. If I reverse the entity first using this button,
03:29then the arc now goes in the same direction as the alignment and I can join it up with a
03:35free line.
03:36Now we'll lay out some alignments in our model. First we need to set the data shortcut project for this
03:42model.
03:44Right click on the data shortcuts folder in Prospector and set the data shortcut project folder.
03:49Make sure the folder is set to Iowa City 0403. Expand the surfaces collection under data shortcuts.
03:58Right click on existing ground and choose create reference. This will bring the surface into our
04:04model as a reference. Change the surface style to contours 2 feet and 10 feet. It's a good idea to
04:11be able to
04:11see the surface when you design your alignments to ensure your alignment is placed sensibly in relation to
04:17the terrain. From the home ribbon, choose alignment, then alignment creation tools.
04:27Set the alignment name to McCollister Boulevard.
04:32We'll use the layout alignment style which has different colors for lines and curves and is ideal for designing.
04:42In the design criteria, turn on criteria based design. Accept the default design criteria file and set the design check
04:51set to collector.
04:54We're going to use a fixed line to create fixed tangents where the yellow lines are drawn in the model.
05:01From the toolbar, under the lines button, choose fixed line two points.
05:08Using an endpoint snap, create lines from the start and end of each yellow line in the drawing.
05:15Zoom and pan as necessary and press enter when all of the lines have been created.
05:25In the model between the first two tangents, there are a series of AutoCAD points.
05:33These denote positions where our curve can pass through.
05:37We'll use a free curve best fit to find the best curve that matches these points.
05:44Pick the end of the first tangent and then the start of the second tangent.
05:49In the best fit dialog, select from AutoCAD points.
05:56Select each point in turn and then press enter.
06:01A regression data table will be displayed which shows information about the best fit curve
06:07and the separation between the curve and the picked points.
06:12You can see the offset on line four is rather large so we can exclude this point from the selection.
06:18The curve will be recalculated.
06:21Click the save button then dismiss the dialog.
06:24The curve is now placed on the alignment.
06:29For the next curve, choose free curve fillet between two entities radius.
06:36Pick the incoming tangent then the outgoing tangent and press enter to accept less than 180 for the angle.
06:44On the command line, the radius is defaulting to 1500 feet, the minimum required by the design criteria file.
06:53We'll ignore this and type in 1000 for the radius.
06:57Now place the last curve using the same options.
07:02You'll need to zoom in to pick the end of the first tangent.
07:06You'll see that when we place the last curve, the alignment is now fully labelled.
07:11This is because all of the entities are now joined up and the alignment is complete.
07:15Close the layout toolbar.
07:20Now we'll create the sycamore heights alignment.
07:23Open the alignment creation tools and rename the alignment to sycamore heights.
07:29In the design criteria, select use criteria based design.
07:34Make sure the design criteria file is not selected.
07:38Set the design check set to subdivision.
07:42This time we'll layout the alignment using intersection points.
07:46From the intersection points pulldown, choose curve and spiral settings.
07:51Set the default curve radius to 140 feet.
07:55We won't be using any spiral curves.
07:58Go back to the intersection points button and choose tangent to tangent with curves.
08:05Turn on your center point object snaps and then pick the marker circles in the drawing in turn,
08:11where we want to place the intersection points.
08:14Curves are drawn automatically at each intersection point using the default radius we've set.
08:22We've now laid out the alignments using grips.
08:27If you pick an alignment on screen, you'll see grips appear,
08:30similar to the grips you see when you edit a polyline.
08:34The square grip on the end of a tangent allows you to move the end of the tangent,
08:39changing its direction and length.
08:42The square grip in the middle of a tangent allows you to move the tangent,
08:46retaining its length and moving it parallel to itself.
08:51Circle grips at the end of a curve allow you to change the length and radius of the curve.
08:58The circle grip in the center of the curve allows you to move the curve to go through a pass
09:05-through
09:05point, changing its length and radius.
09:09The arrow grip on the curve also allows you to change the length and radius of the curve,
09:14moving it towards or away from the intersection point.
09:18The triangle grip at the intersection point allows you to move the intersection point,
09:24changing the direction and length of the tangents, but keeping the curve radius fixed.
09:30When you move the intersection point, adjacent curves may meet each other,
09:34preventing any further movement.
09:36You may need to adjust the length of any attached curves to be able to move the IP to where
09:41you need it.
09:43You can also use the triangle grip at the intersection point to break the IP apart.
09:48When you break it apart, you get two new grips at the end of each tangent,
09:52and you can move each tangent independently.
09:56First, let's have a look at editing the Sycamore Heights alignment.
10:00We can see that our applied design checks have resulted in some warnings being placed on the alignment.
10:07These are indicating that the curved radii are currently too small to meet our design standards.
10:14We're going to edit the alignment to fix the radii and make improvements to the alignment.
10:20Select the alignment to call up the grips.
10:23We can use the curved grips to drag the first curve out to increase its radius.
10:28A small adjustment should be enough to remove the warning.
10:32At the intersection with our collector road, you can see that the tangent is joining it at a slight angle,
10:38and ideally we'd like it to be near perpendicular.
10:43Click on the first intersection point, and using the triangle grip,
10:46drag it out, improving the angle of the first tangent to McAulister Boulevard.
10:53Now adjust the last curve on the alignment by dragging the curve out,
10:56so that the end of the curve just extends beyond woodside view.
11:01Looking at the entire alignment, it's clear we could simplify the geometry
11:05by removing the central curve, and instead have a single curve across the top of the road.
11:13Using the alignment layout tools, we can delete these elements on the road,
11:18and we can place a new curve between them.
11:21It will need to be a free curve, because it will be attached at both ends to another entity.
11:27We'll use the option Free Curve Fillet with the radius.
11:32Pick the incoming, then the outgoing tangent.
11:35The curve angle will be less than 180,
11:39and then type in a curve radius of 600.
11:43We can see now that we've created another problem,
11:46as the tangent length here is too short.
11:49It needs to be a minimum length of 100 feet.
11:53Instead of editing this on screen, we'll open the alignment grid view.
11:58In here, we can see the geometry of the alignment in table form.
12:03Any property in here that's not grayed out can be edited.
12:07We can edit the tangency constraints, the curve radii,
12:12change the chord length, or the degree of curvature.
12:16Set the radius of the first curve to 400 feet.
12:20You can see that now we have improved the length of the tangent,
12:24and all of the warning markers have gone.
12:27Let's see what happens if we change the tangency constraint.
12:32This curve is currently constrained on both sides. It's a free curve.
12:38We can change its constraint to a fixed curve,
12:41and now you can see you can no longer edit the radius, because it's now fixed.
12:46If we edit this graphically and move the curve using its grip,
12:50the curve retains its radius, but the tangents move,
12:53because the tangents are now floating entities.
12:58If we re-constrain the curve back to a free curve,
13:01notice how the tangents are now fixed tangents again.
13:06Now we'll edit our collector road, McCollister Boulevard.
13:10We can see on this part of the alignment here that we have three warning markers.
13:16This marker indicates that it doesn't meet our minimum radius of 1500 feet.
13:21This is from the design criteria file.
13:24And it doesn't meet our local standard of a minimum radius of 1200 feet,
13:29which was added through our check set.
13:32Similarly, this curve has the same problem.
13:35This tangent is too short.
13:38It stands to reason that if we make these curves longer by increasing the radius,
13:43then we'll reduce the length of the tangent, making that situation worse.
13:48This geometry isn't going to work, so we need to redefine this part of the alignment.
13:54Select the alignment, and open the alignment layout tools.
13:58We'll delete the geometry on this part of the alignment.
14:02First delete the tangent, and then this curve.
14:05We can now place a new curve between the existing curve and the existing tangent.
14:12It will need to be a free curve, so we'll use a free curve fillet between two entities with the
14:17radius.
14:19Pick the curve going in and the tangent going out.
14:23On the command line, it's asking you if this is a compound curve or a reverse curve.
14:29Type R for a reverse curve, because it's turning in the opposite direction to the first curve.
14:34Set the radius to the default of 1500.
14:38We still have to fix the radius on this curve, so let's call up the alignment grid view.
14:43And in here, we'll change the curve radius for the curve to 1500.
14:49We've now fixed all of the geometry issues on the collector road.
14:54Adjust the wood side view alignment so that the start and end of the alignments
14:59are snapped onto the new position of the alignments we've changed.
15:04Finally, there's one last edit that we need to make.
15:08A Collister Boulevard alignment has its Station 0 at the start of the alignment,
15:15some distance along the existing road.
15:19We want to have Station 0 at the end of the existing part of the road, but we don't want
15:25to shorten the alignment,
15:26as the starting segment helps us to establish the levels we'll need to tie into.
15:32We can use the alignment properties to reset the position of Station 0.
15:38On the Station Control tab, select the button beside the coordinate values.
15:44This will allow us to pick a new coordinate reference for Station 0.
15:49The warning message tells us that changing the stationing might affect other objects that have
15:54already been created. We don't need to worry about that, so click OK.
16:01Snap to the end of the red centerline on the survey drawing for the position of Station 0.
16:08Click OK to accept the changes.
16:11In the drawing, you can see we have reset the Station 0 marker, and the Station values before this are
16:17negative.
16:20We've now completed our edits of the alignments in the drawing, and we can move on to design our vertical
16:25We've maintained our control of the alignment source.

Recommended