00:10Okay, that's one Sencut Brax slip joint, rather nice, there's the clip on this side, looks
00:29reversible. D2, supposedly, I took two sharpenings to clean up that factory edge, it was I think
00:42around 19 degrees for the factory bevel, it's now 18 degrees, sharpened twice, and it's been
00:51sharpened to 3000 grit, because I really wanted to clean up that edge because of the factory
00:59FUBAR. It's got a little bit of sunshine but there's rain coming, nice and smooth, nice
01:11and smooth on the paper. We're talking rain coming, so we'll try and beat that rain. A
01:24bit humid today, I think 75% humidity or something, so a bit annoying for the humidity. About
01:3318 degrees, 3000 grit, let's see what happens on the rope.
02:03.
02:04.
02:33.
03:03.
03:04.
03:35.
03:35.
03:35.
04:03.
04:05.
04:05.
04:05.
04:05.
04:05.
04:06.
04:06.
04:07.
04:17.
04:35Alright it looks like where I'm hitting that wood is where we've suffered the greatest
04:41amount of loss so now we're going to give it a quick and dirty wood strop and see what
04:52happens
04:53Okay, let's get on there
05:00Let's go this way
05:03this way, let's go this way, let's go this way
05:13After a quick and dirty woodstrop what do we get oh that's smooth oh that is so
05:25smooth so it looks like I think about was it 550 maybe I think it was 550 we
05:35rolled the edge oh it feels like there's still a fair bit of edge there after the
05:45quick and dirty woodstrop so yeah it looks like a
