• 7 months ago
Testing 20/18/16 degrees on the rope .
Transcript
00:04okay got this one to test bevel angle this knife wasn't very expensive but
00:15anyway it's got a nice crispy spine on it after grinding it and the edge at the moment is on
00:2420 degrees per side it's a thousand grit and right about where my finger is there is the slightest
00:35little chip on the very edge of the apex of the edge just a slightest little chip for some strange
00:49reason and I can feel it when I slice the paper okay so I've stroked it enough so I can
00:59barely
00:59feel it but in any way reasonably sharp 20 degrees let's see what it does 20 degrees on the rope
01:07oh the HRC is right on about 55 55 HRC scratches it the finish but I can't feel it I
01:21cannot feel
01:22anything but 55 HRC just just scratches the surface but I can't feel a thing with my fingers
01:32so I would say this blade is probably maybe 55 56 or something like that because it scratched it
01:42but it didn't move any metal I can't feel anything there so you can call it 60 55 but I
01:50would say
01:51it's right around the 55 56 marks so yeah anyway 20 degrees hey
02:02okay
02:13okay
02:13yeah
02:13yeah
02:13okay
02:30me
02:30yeah
02:31me
02:31yeah
02:31գр
03:00Wow.
03:03That wasn't very good.
03:46I can't believe it.
03:54So we lost that edge at 150 slices with what appears to be a bit of edge roll.
04:01That is not very good at 20 degrees.
04:22OK, that is 18 degrees, 1000 grit.
04:42Very sharp.
04:49Let's see what happens on the rope.
04:51The 20 degree edge was very disappointing.
04:56So I don't know that this is the best steel.
04:59This is my second one of these and I've got to say the first one performed pretty well.
05:05This one, let's see what happens.
05:10Let's see what happens.
05:34Let's see what happens.
06:38Oh, that failed.
06:43I'm going to go past that.
06:45And no, we went through that time.
06:52Not going through that time.
06:54We got a little bit thicker.
06:59No.
07:00We're going to call that a fail.
07:07Way did it fail, eh?
07:21I'm going to call it a fail.
07:24I'm going to call it a fail.
07:26I'm going to call it a fail.
07:41Oh, that was a roll.
07:45Absolutely positively rolled it.
07:47I'm going to call it a fail.
07:57Okay.
08:00One 16 degree, 1000 grit edge.
08:05So that's a 16 degree, 1000 grit edge.
08:11I'm going to call it a fail.
08:22Very, very slicey.
08:30I'm going to call it a fail.
08:37Let's see what happens.
08:39And it's a 10 points.
08:42Bye.
08:42Bye.
08:43Bye-bye.
08:44Bye.
08:44Bye.
08:48Bye.
11:55Ooh, definitely caught there.
11:57You can see we're caught.
12:08Okay, we're going to call that a fail.
12:12So we've got a fail out of it.
12:13And this is at 16 degrees, and we got ourselves a failure point.