00:00A great way to improve the performance and appearance of your Mustang is by installing
00:05the fold viewspaces.
00:07However, it is important to choose the right type of viewspaces and ensure that they are
00:13installed correctly.
00:14To avoid any negative effects, let's take a look at the correct installation steps.
00:20Use a cross-range to loosen a long notch on the side of the view in a diagonal sequence,
00:25but do not remove them completely, using jets to support each end of the car is a better
00:32safety measure.
00:33Use a cross-range to remove the rear side lignette, remove the rear of the hub, and set it to
00:40the
00:40side.
00:40Look at the rear hub assembly for rust.
00:43You can use a brake cleaner to remove them.
00:46Remove any rust and dirt from the rear hub with a rack.
00:49Widen the entire surface to ensure it is smooth.
00:52Because, all of that surface may cause the rear spacer to not fit perfectly with the hub.
00:58Install the bonus forged F2 cooling for the Mustang rear spacers.
01:02Then install the machine like that.
01:05Tighten them with a torque wrench.
01:07A key advantage of bonus for the Mustang rear spacers is the F2 cooling feature.
01:12These bonus for the Mustang rear spacers are designed with heat dissipation grooves to make
01:18brake cooling better.
01:18Distribute the impact of shape.
01:21These grooves allow the external cold air to flow continuously inside the rear spacers when
01:26it rotates.
01:27The air takes away the heat.
01:29So it achieves the purpose of actually dissipating heat for the braking system.
01:35All bars for the Mustang rear spacers are forged.
01:38In addition, high precision for the Mustang rear spacers provide high surface integrity,
01:43effectively guarantee safety, stability, and reliability, and ensure a smooth installing
01:49experience.
01:50Install the rim and then install the stock net.
01:53Use a torque wrench to tighten them on the rear.
01:56Make sure they are secure.
01:58Remove the jack stands.
01:59Slowly lower the car until the tires fully touch the ground and remove the jack.
02:04Use a torque wrench to tighten the lug nut to the specific torque.
02:09Always tighten them in a diagonal sequence.
02:11This will ensure that the lug nut works.
02:14The same operation is done for remaining wheels.
02:17Bonus recommend checking the use of the Ford Mustang rear spacers every 6 months and checking
02:22the vehicle's operation to ensure safe driving.
02:25After installing the Ford Mustang rear spacers, we can see the wheels pushed out slightly,
02:31giving it a more fresh look with the feathers.
02:37No AI was used in the creation of this video.
02:41All editing was done manually.
02:43See you in the next video.
Comments