00:00A great way to improve the performance and appearance of your car is by installing wheel spacers.
00:05However, it is important to choose the right type of spacers and ensure that they are installed correctly to avoid
00:13any negative effects.
00:14Let's take a look at the proper installation steps.
00:17Using a cross-range loosen the stock bolt in a diagonal sequence, but do not remove them cumulate.
00:23Using just them to support each end of the car is a better safety measure.
00:28To succeed in removing the wheel hub, use a cross-range to remove the stock bolt.
00:34Install a wheel hanger, remove the wheel of the hub, and set it to the side.
00:39You can use a brake cleaner to remove them.
00:42Remove any rust and dirt from the wheel hub with a rug.
00:45Widen the entire surface to ensure it is smooth, because all of that surface may cause the wheel spacer to
00:51not fit perfectly with the hub.
00:53Install the bonus for the lightweight plus wheel spacers, then install the wheel hanger.
00:57A key advantage of bonus wheel spacers is the lightweight plus feature.
01:02The benefits of the lightweight plus design are that the hollow design is further optimized based on the traditional wheel
01:08spacers.
01:09It is an effective design that can reduce weight and energy consumption, and improve handling while ensuring safety and reliability.
01:16In addition, high-precision wheel spacers provide high-service integrity.
01:22Effectively guarantees safety, stability, and reliability, and ensures smooth installing experience.
01:29Install the rim and then install the extending wheel bolt.
01:32Use a torque wrench to tighten them on the wheel.
01:35Make sure they are secure.
01:37Remove the jack stands.
01:38Slowly lower the car until the tightness fully touches the ground, and remove the jack.
01:44Use a torque wrench to tighten the extending wheel bolt to the specific torque.
01:48Always tighten them in a diagonal sequence.
01:51This will ensure that the extending wheel bolts work.
01:54The same operation is done for the remaining wheels.
01:57After installing the wheel spacers, drive slowly back and firm, ensuring the rims are turned a few times.
02:04Bonus recommend checking the use of the wheel spacers every 6 months, and checking the vehicle's operation to ensure safe
02:10driving.
02:14No AI was used in the creation of this video.
02:18All editing was done manually.
02:20See you in the next video.
Comments