00:00A great way to improve the performance and appearance of your car is by installing wheel spacers.
00:06However, it is important to choose the right type of spacers and ensure that they're installed
00:11correctly to avoid any negative effects. Let's take a look at the correct installation steps.
00:17Use a cross-range to loosen the lug nut on the side of the wheel in a diagonal sequence,
00:22but do not remove them completely. Using jacks to support each end of the car is a better safety
00:29measure. Use a cross-range to remove the wheel side lug nut. Remove the wheel of the hub and set
00:35it to
00:35the side. Look at the wheel hub assembly for rust. You can use a black key nut to remove them.
00:41Remove
00:42any rust and dirt from the wheel hub with a grug. Widen the entire surface to ensure it is smooth,
00:47because all of that surface may cause the wheel spacer to not fit perfectly with the hub.
00:52Install the bonus forged FT cooling wheel spacers. Then install the matching lug nut. Tighten them
00:59with a torque wrench. A key advantage of bonus wheel spacers is the FT cooling feature. These
01:05wheel spacers are designed with petal-shaped grooves. The grooves allow this tonal-coated air to flow
01:11continuously inside the wheel spacer where it rotates. The air takes away the heat. After the
01:17dissipating heat for the braking system, all bonus wheel spacers are forged. In addition,
01:23high-precision wheel spacers provide high-surface integrity, effectively guarantee safety, stability,
01:29and reliability, and ensures more installing experience. Install the ring and then install the stock nut.
01:38Use a torque wrench to loosen them on the wheel. Make sure they are secure. Remove the jack stands.
01:44Slowly lower the car until the tires fully touch the ground, and remove the jack. Use a torque wrench
01:51to tighten the lug nut to a specific torque. Always tighten them in a diagonal sequence. This will ensure
01:57that the lug nut work. The same operation is done for remaining wheels. After installing the wheel spacers,
02:05drive slowly back and firm. Bonus recommends checking the use of the wheel spacers every six months,
02:10and checking the vehicle's operation to ensure safe driving.
02:20No AI was used in the creation of this video. All editing was done manually. See you in the next
02:27video.
Comments