Mastering Placeholder Ducts in Revit MEPریویٹ میپ میں پلیس ہولڈر ڈکٹ میں مہارت حاصل کرناPart-49

Unlocking Efficiency: Using Placeholder Ducts in Revit MEP
In this concise tutorial, we'll explore the power of Placeholder Ducts in Revit MEP, a game-changer for MEP designers and engineers.
What you'll learn:
- What are Placeholder Ducts and their benefits
- How to create and configure Placeholder Ducts
- Best practices for using Placeholder Ducts in your Revit MEP projects

Why use Placeholder Ducts?

- Streamline your design process
- Enhance coordination with other disciplines
- Improve design accuracy and reduce errors

Keywords: Revit MEP, Placeholder Ducts, MEP Design, Ductwork, Revit Tutorial, BIM, Building Design, Engineering, Architecture, Autodesk, Revit Tips

Hashtags: #RevitMEP #PlaceholderDucts #MEPDesign #Ductwork #RevitTutorial #BIM #BuildingDesign #Engineering #Architecture #Autodesk #RevitTips #DesignEfficiency

Categories: Education, Engineering, Architecture, Building Design, MEP Design, Revit MEP, BIM, Autodesk

Transcript

00:00As-salamu alaykum wa rahmatullahi wa barakatuhu.

00:25Bismillahirrahmanirrahim.

00:26Bismillahirrahmanirrahim.

00:56Bismillahirrahmanirrahim.

00:58Bismillahirrahmanirrahim.

01:00Bismillahirrahmanirrahim.

01:02Bismillahirrahmanirrahim.

01:04Bismillahirrahmanirrahim.

01:06Bismillahirrahmanirrahim.

01:08Bismillahirrahmanirrahim.

01:10Bismillahirrahmanirrahim.

01:12Bismillahirrahmanirrahim.

01:14Bismillahirrahmanirrahim.

01:16Bismillahirrahmanirrahim.

01:18Bismillahirrahmanirrahim.

01:20Bismillahirrahmanirrahim.

01:22Bismillahirrahmanirrahim.

01:24Bismillahirrahmanirrahim.

01:26Bismillahirrahmanirrahim.

01:28Bismillahirrahmanirrahim.

01:30Bismillahirrahmanirrahim.

01:32Bismillahirrahmanirrahim.

01:34Daskalenrahrahim.

01:36Bismillahirrahmanirrahim.

01:38here, okay, and it's just like the duct. This is 2D, and this is a single line duct

01:45which is placed. This is temporary layout, which you can draw and change or modify

01:55that is very easy. So, we go and study how basically the placeholder is

02:01What is this hold of duct?

02:12A fragrance product in Revit MEP is a temporary element used to represent a duct or duct system.

02:18That means, no duct system.

02:20If you have a fresh air system or return air system or supply air system,

02:27you can use a temporary element.

02:32In a design before the actual duct work is fully designed.

02:36Before the actual duct work is fully designed.

02:40It allows you to lay out and visualize the duct system

02:45and later replace it with the actual duct work.

02:48If you have a place hold of duct work,

02:50then you have width height and elevation.

02:56You have to click a box and select the type of place.

02:59You can see the other duct work that you can use.

03:03If you have a place holder,

03:05then you can see that in the place holder.

03:07For example, you can see the type of duct work.

03:09If you need a place holder,

03:11you can see the type of place holder.

03:13Then you can see the type of place holder.

03:15You can see the type of place holder duct.

03:17Right?

03:18Okay so you go to ct to tab hvc panel place order duct tool. Select type of place order

03:27type of place order. Okay so it is rectangular, wrong type, oval. Draw the place for duct,

03:35in the desired location you can draw it, where you can draw it, where you can draw it,

03:39configure properties, shape, size, elevation, all the stuff you can give. Later use the

03:44If you draw a single line, then you have shape, size, and elevation.

03:51Then you can use the convert placeholder duct tool to replace with actual duct work placeholder.

04:00Ducts help you work more efficiently and coordinate with other disciplines before finalizing the design.

04:06Before that, then you can use duct holder to replace your duct holder and replace your duct holder.

04:16So, you can use duct holder to replace the duct holder.

04:26Type of placeholder and payment.

04:30Placeholder links for link model.

04:33a link model can be used in template to pre-configure visibility graphic.

04:39Templates can be pre-configure visibility graphic to pre-configure

04:45type mapping or filters for link architecture structure model.

04:49How it was used in an empty file as a placeholder when the real model arrived, its settings are already defined.

04:57So, what do we do?

05:03The same time setting as the coordination setting is repeated in the same time.

05:14The same time setting as the coordination setting is repeated in the same time.

05:19The same time setting is repeated in the same time.

05:27The same time setting is repeated in the same time setting of the

05:44design.

05:45place order select

05:47place order select

05:49so here width and height

05:51height

05:53elevation

05:55elevation

05:57elevation

05:59height

06:01height

06:03apply

06:05apply

06:07now

06:09where

06:11I can show you

06:13here

06:15here

06:17on board

06:19elevation

06:21elevation

06:23elevation

06:25here

06:27here

06:29here

06:31here

06:33here

06:35here

06:37here

06:39what is deranged the ?

06:44How to operate there?

06:47You have to restore the monitor

06:49which makes it easier?

06:52You have to take anything

06:55and then...

06:56Play the monitor

06:57between after striking

06:58here..

06:59First,

07:00a is defined

07:03just

07:05than

07:06Take a look at things happening, so I don't care whether it is why I don't know how úns there are and all such chunks.

07:25You can tell the disappointment from this area.

07:31move or change can be very easy to do it.

07:34Now, look at this, the single line

07:39which you have to move

07:41move can be very easy to do it.

07:43You can rotate, move can be

07:46rotate, move can be

07:47move can be

07:48move can be

07:49because you have to do it.

07:52So, you have to connect

07:53to your connection

07:54and shift can be very easy to do it.

07:57But if we do this duct,

08:01then we can shift

08:05then, you can move

08:07into the duct.

08:09Then, you can move

08:11into the duct.

08:13Then, you can move

08:15to the duct.

08:17You can move

08:19and move it.

08:21Then, you can move

08:23into the duct.

08:27All the way in the end.

08:29Okay?

08:31I should just move

08:33to your section,

08:34this is your…

08:35Here you can go to yourself and

08:37first, you have to connect

08:39duct selects

08:41and selects.

08:42This is your duct.

08:44This is your duct.

08:46Here you can select.

08:48This is your duct,

08:49here you can select.

08:51Then, you have to change.

08:53Change to your function

08:54can be changed.

08:56Rotation.

08:58Move.

09:00Shift.

09:02Primary design.

09:04That's why you can be changed.

09:06That you can be changed.

09:08That you can be changed.

09:10Because you can be changed.

09:12You can be changed.

09:14You can be changed.

09:16You can be changed.

09:18Layout.

09:20It's been changed.

09:26All the other things have changed.

09:28Look at what you can do.

09:30Your points have changed.

09:32If you want to change the powers

09:38to change the powers or your powers,

09:40then click the key to clone and select the powers.

09:44You can select the powers.

09:46place holder we have to be able to convert place holder

09:49can be able to convert place holder when you come to your

09:50place holder.

09:51So, automatically you have to convert

09:53place holder.

09:54You have to convert

09:55convert

10:09as you can see when you come.

10:13You'll have to convert

10:16diya select kerne ke baad apne convert ker diya, thaik hai?

10:20Jyase ha ha ha convert ke liya, iske baad apke paas select kare面

10:24oopar apke paas koji aysi jeho hai, koji bhi

10:28aapke paas option nahi aarhi hoti, jis option ko

10:32aap select kerke is that ko office placeholder ke andre joh hai,

10:36isko lukke jasakke, thaik hai?

10:38Toh, yeh joh hai, iska sab se bada fayda yeh hai

10:43that conceptual design to you can't do it, you can't do it.

10:48You can do it, you can do it.

10:50And, you can do it, you can do it.

10:52So, if you want to do it, you can do it.

10:55You can do it.

10:58Then you can do it.

11:00The place holder will be the actual 2D ducts.

11:05So, you can do it.

11:07If you want to do it,

11:10keep trying to do it.

11:13If you need to do it,

11:18where do you need to do it?

11:20So, now that you can do it.

11:25This is an exercise.

11:27We can do it.

11:32so I told you about how to use it.

11:39So, I'll keep it in the way.

11:41If you have any exercises, I'll share it with you.

11:45If you have any other friends, I'll keep it in the way.

11:48So, I'll keep it in the way.

11:49Allah Hafiz, Aslam alaykum wa rahmatullahi wa barakatuh.

Mastering Placeholder Ducts in Revit MEPریویٹ میپ میں پلیس ہولڈر ڈکٹ میں مہارت حاصل کرناPart-49

Category

Transcript

Be the first to comment

Recommended