Mastering Air Terminals and Equipment in Revit MEP: A Comprehensive Guide
In this in-depth tutorial, we'll explore the fundamentals of air terminals and equipment in Revit MEP, and walk you through the process of placing them in your projects.
What you'll learn:
- The role of air terminals and equipment in HVAC systems - How to place air terminals (diffusers, grilles, registers) in ceilings, walls, and floors - How to place equipment (AHUs, fans, heat exchangers) in mechanical rooms and rooftops - How to configure properties and connections for air terminals and equipment - Best practices for using air terminals and equipment in Revit MEP projects
Why is this important?
- Accurate placement and configuration of air terminals and equipment is crucial for efficient HVAC system design - Properly designed HVAC systems improve indoor air quality, comfort, and energy efficiency - Revit MEP's tools and features help you create accurate and efficient designs
Revit MEP, Air Terminals, Equipment, HVAC Design, Diffusers, Grilles, Registers, AHUs, Fans, Heat Exchangers, Mechanical Rooms, Rooftops, Building Design, MEP Design, Revit Tutorial, CAD, BIM, Sustainability, Green Building
02:02Air terminals have come to air supply, intake and air
02:07is left by jarring.
02:09given like diffusers, grins and registers.
02:13Different types of devices are used.
02:18diffusers are used to be rectangular, linear diffusers
02:25Thank you very much.
02:55as well as possible. Then, this is the one where you can see the
02:58spinbook which has some sort of speed of the heat. The spinbook is
03:04special. Yes, so we have a terminal which is basically ABC
03:11which is how much you can see. Yes, remember the diffuser
03:15which shows the filter on the linear diffuser. That's the
03:18vertical length. It's also the diffuser that has a
03:22This is the case of a linear diffuser.
03:24If you look at the figure,
03:26you can see that
03:28you have linear diffuser
03:30and linear diffuser
03:32is wrong.
03:34If you look at this,
03:36you will see linear diffuser
03:38which is wrong.
03:40Linear diffuser
03:42can also be small.
03:44Rectangular diffuser
03:46and square diffuser
03:48can also be small.
03:50Totally depends on your space.
03:52we have to do our own material, including the material.
03:52So we want to know how to make the material available to us.
03:56So that we can make it as well.
03:58You can make some place here.
04:05After that, we will typically put in ceiling,
04:09and now we'll get our ceiling.
04:11So and I will...
04:13So this is another section of ceiling,
04:15which is an entire ceiling that you have.
04:17So you can make it a two foot,
04:19So, you can see the walls and floors are used to deliver and extract air from a space.
04:47A terminal basically you can transfer the water with the area.
04:52Which is used water which is used to water.
04:55It has to go back and forth.
04:58Controlling temperature.
05:00The temperature control is high.
05:02Humidity, which is your temperature control.
05:06And air quality makes better.
05:10It has different type of equipment.
05:17which is air conditioning unit, which basically you have air supply, fans, heat exchange, pumps, equipment is typically used in mechanical rooms, rooftop or other design areas.
05:33The equipment is used to heat, cool, ventilate and pedestrian building.
05:37Jitney equipment's, air handling units, chillers, fan, FCU's.
05:55Then, if you go to the system tab, you can go to the system tab.
06:07You can go to the system tab.
06:09Select the air terminal type.
06:12You can select the air terminal type.
06:16Place the air terminal in the desired location.
06:19You can select the air flow and adjust the size, type, adjust the type.
06:34Then, go to the system tab, HVC panel equipment tool.
06:39Select the equipment tool.
06:41You have air handling unit, FCU, heat, pump, heat, angle, pump.
06:47Then, you have to fix itself.
06:49All the equipment also is related to HVC.
06:50You can select the equipment to place the equipment in your desired location.
06:54The equipment itself is equipment in the desired location.
06:56The machine room or for the machine building, especially the floor,
07:01you can be made.
07:02So, you have to create all the machines that you can maintain.
07:04I can select the properties.
07:06Confirial properties, the size type connection, etc.
07:07You can also use the space and zones to refine spaces and zones before that.
07:09connection which you can use space and zones to define spaces and zones before placing air terminals.
07:18First of all, you can create spaces and zones. So you can use air terminals to connect air terminals,
07:31equipment and system tool to connect air terminals. So you can use air terminals and
07:35requirements. Creating a function, HV system, so that a better function, HV system,
07:41which is called configure system type to define system behavior and calculation.
07:47And then system type is called supply air, exhaust air, fresh air,
07:52which is maintained so that the calculation and behavior will maintain.
07:57So you can use air, exhaust air, exhaust air, exhaust air, exhaust air, exhaust air.
08:03We have a simple project that I have told you about the tutorial that you have already
08:14installed.
08:28So, here we go, HVC ducts, HVC ducts, and here are different floors. Different floors you can see here.
08:41First of all, I'm going to select this. Because I need to select this, I need to select this ceiling plane.
08:48So, I need to select this ceiling plane. I need to select this ceiling plane.
08:53So, I need to select this ceiling plane. So, I need to select this ceiling.
08:59So, here we go, HVC ducts.
09:03So, I need to select this ceiling.
09:08So, I need to select this ceiling.
09:13So, remember, we have different types of terminals.
09:17So, if you have a terminal, you can select this stuff.
09:21For the first time, you need to select a terminal.
09:24If you are a terminal, you need to select this terminal.
09:27Then you can see if you have a terminal.
09:29If you have a terminal so, this is electrical.
09:31so automatically ceiling
09:33with the ceiling
09:35with the ceiling
09:37and the architecture
09:39which engineer
09:41will shift
09:43automatically
09:45change
09:47so I will put it
09:49here we have a
09:51refluencer
09:53now
09:55first
09:57we are
09:59two
10:02here
10:04we have
10:06here
10:07we have
10:082450
10:09and
10:102400
10:12but
10:14keep sure
10:15you
10:16see
10:17here
10:18here
10:19here
10:20here
10:21here
10:23here
10:25here
10:26to
10:33here
10:34here
10:35from host. So, here, height is elevation from the level. I mean, how much up, how much
10:43up, how much up, how much up. Automatically, you have your diffuser, which you will see
10:49here. Here, in the system, you have returned here. So, you can go to the system and select
10:57it. So, you can change it. So, you need supply, return to return. So, here, return
11:05here, here, here, here. You have free diffuser here. This diffuser here is not here. I
11:19first go here and then, here, here. Our return grill here is hosted. I say place on the face
11:26state highlighted once in a folder, then you apply the file dobrzewill type, prove it
11:32as a place on the page. Then I mean place the place on the page output and then you
11:36layer pages here on the page. Now I have a driver, a dot. So I wouldn't got a section
11:44also and the line goes over here, I want to label the space results and now I just
11:50just contin��니다 by going on. Because looking the main piece of it is used Putin
11:55But this is hosted. Now I will change this ceiling. I will change this ceiling and see if this is moved. This is moved. This is moved. This is moved. This is moved.
12:09But this is hosted. This is hosted. So we want to go down. We have a rivet link. I have a rivet link. I will click right here.
12:21Managery I will click on the link where I have the architecture link and I will reload.
12:26and reload my common folder which I have to do with my architecture plans.
12:39Here I go, here I go, exercise and exercise is called common folder.
12:45Common folder is called revised architecture plans.
12:49I have to select this.
12:51If I have a select, then I go, my own collection is called Coordination Review.
13:01Coordination Review have already covered it.
13:04This is the original Pro-nay lecture and we'll see it in this video.
13:09We've just set it to try to select this.
13:12that I'm doing the work, right? So, the co-ordination co-review, we can do it all. Okay. So, let's see here, what happened, is this wall,
13:19it's here, it goes. But now the wind, the wind, the wind, the wind has moved to this way. But the diffuser
13:26is moving now. So, you can make sure that when you have to make sure you have to make sure that when you have to make sure
13:33something, something like that, when you have to make sure you have to make sure that you have to get
13:37So depending on the requirement that you have to be a terminal.
13:44Now we have mechanical equipment.
13:50Mechanical equipment.
13:53Mechanical equipment you have already loaded with a library.
13:58So here is a heater.
14:00Here is a heater.
14:02So here is a heater.
14:08You've got any stuff.
14:10The key now is a государ.
14:13No of the created elements are visible in floor-plan level to HVC plan view.
14:19You may want to check the active view, its parameters and visibility setting as well as any plan regions and their settings.
14:23the active view, its parameters and where the visibility setting as well as any player
14:29regions and their settings, okay? So, it means that visibility graphic in this
14:34thing is not visible, okay? So, that's why I click it and check it out, okay? So,
14:39I'm going to view, visibility, but I'm going to view, visibility, but I'm going to go
14:43to the visibility, so I'm going to see that there are all gray-up things, all gray-up.
14:47So, the view template is small, okay? If you have a view template, you can see here
14:52view template, view template. You can see here the view template.
14:56Check it, there is the view template.���less view template ...
15:16here move Lanera. You can show here, watch is there and look here,
15:20in here, or here, the mechanical equipment will look like a highlight or anything.
15:24If you have a highlight and highlight, then you will see how the highlight is until
15:28then the highlight here, apply and apply now.
15:30Just like you will see, you will see, you will see the heater in there, you will stare
15:35starting to see how the heater we need to look at, so these changes come together.
15:40As you can see, there is a look at the look, but the gaze or the design doesn't
15:44look at.
15:45आपने सबसे पहले विजीबिल्टी ग्रैफिक के अगर आप देखते हैं कि उसके अंदर कुछ भी आप चेंज नहीं कर पा रहे तो फिर याद रखें आपकी विव टेमप्रेट पर आई हुई हुई हुई है ठीक है तो विव टेमप्रेट के अंदर आपने पर जाना यहां प
16:15देखें आपके पास हैं हुई है यहां पे आपने यह डिसाइड करना है कि वह मौडल प्रिमेंट आप चीज करने हैं यह आप एनूटेशन का मतलब होता है ग्लिड्स बगएरा आपकी यह टेक्स्ट बगएरा है ठीक है क्योंकि मौडल कैटेगरी है तो आप मौडल कैटे�
16:45लगा लगे यह अपनी �kste लगा लेंगे ऊपने रिजेड्स बगा लगा लेंगे चीक है खीक है जिस दरन से
16:51and then you will have to go back to your own hosted or non-hosted,
16:55which you should have to go back to your own hosted or non-hosted.
17:00So I'll be back to my own exercise,
17:05which is that 8 terminals and machines and whatever you can fix on your own.
17:11All of you, peace, and peace.
17:16Please share my videos and share my videos so that you can find out.
Be the first to comment