Revit MEP Energy Settings A Step-by-Step Guideریویٹ ایم ای پی میں توانائی کا تجزیہ کیسے بنایا جائے۔Part-45

Mastering Revit MEP Energy Settings: A Step-by-Step Guide
Learn how to optimize energy efficiency in your Revit MEP projects with our comprehensive guide to Energy Settings. In this video, we'll show you how to define energy analysis settings, run energy simulations, and optimize building design for energy efficiency.

Revit MEP, Energy Settings, Energy Analysis, Energy Efficiency, Building Design, HVAC, Insulation, Glazing, Energy Simulation, Energy Modeling, BIM

#RevitMEP #EnergyEfficiency #EnergyAnalysis #BIM #Sustainability #GreenBuilding #HVAC #BuildingDesign #EnergyModeling #RevitTutorial #MEPDesign

Transcript

00:00As-salamu alaykum wa rahmatullahi wa barakatuhu

00:27As-salamu alaykum wa rahmatullahi wa barakatuhu

00:57As-salamu alaykum wa barakatuhu

01:27As-salamu alaykum wa barakatuhu

01:29As-salamu alaykum wa barakatuhu

01:31As-salamu alaykum wa barakatuhu

01:33As-salamu alaykum wa barakatuhu

01:35As-salamu alaykum wa barakatuhu

01:37As-salamu alaykum wa barakatuhu

01:39As-salamu alaykum wa barakatuhu

01:41As-salamu alaykum wa barakatuhu

01:43As-salamu alaykum wa barakatuhu

01:45As-salamu alaykum wa barakatuhu

01:47As-salamu alaykum wa barakatuhu

01:49As-salamu alaykum wa barakatuhu

02:15that allows you to define and manage energy and energy setting for your building designed

02:21in enables you to stimulate and analyze the energy performance of your building helping

02:28you to optimize energy efficiency, reduce energy cost and minimize environmental impact.

02:35Okay.

02:37Just like you have to understand that we have to manage the energy, carbon gas that we

02:43have to lose. Green energies can be better and the energy waste is in the building

02:51inside. Energy is in control and the energy is in control and the energy is in the

02:57building comfortable zone. Energy is in the same way. Energy is in the same way.

03:07Energy is in a very long chapter. Different type of energy is in different types of energy.

03:11just that those energies of view are

03:14oily, to be more

03:15energy.

03:16There are some energies that you can

03:19avoid these of this.

03:20There are some energies that you can

03:21avoid them.

03:23There are some energies that you can

03:25see.

03:26There are some energies that you can

03:28use in this آپ for solar energy, wind

03:30energy opportunity, hydro power energy

03:34energy energy, bio mass

03:36energy energy,

03:38you can call focus.

03:41energy, generate weight is also very good. Solar salt water water water water water water

03:55Beijing is also very good.

04:04ocean, which waves of the ocean, I have green energy. You can use this. You can use it.

04:11So you can use this. You can use this. This is the environment that can be used to

04:29your emission low, so that our health or green energy

04:37can be better and improve.

04:41What can you do with energy setting?

04:44Define energy and energy setting for your building, including building type and location.

04:49What can you do with your building type?

04:51What can you do with your location?

04:55Because in Revit, there are parameters that you can give to your location.

05:01What can you do with your location?

05:03What can you do with dry bulb?

05:05What can you do with energy?

05:07Where are you from?

05:09Where are you from?

05:11This is all about sustainability.

05:15Climate zone and weather data.

05:19What can you do with alignment zone?

05:21Weather data?

05:23How do you do?

05:25Building orientation.

05:27Building orientation.

05:29Building rotation.

05:31Building.

05:33Insulation and glazing.

05:35Insulation and shisha.

05:37Building.

05:39All the things matter.

05:41Run energy to analyze.

05:43Then you have to analyze simulation.

05:45Energy consumption.

05:47Costs.

05:49Energy usage pattern.

05:51Peak demand and load.

05:53Profile.

05:55Energy is very important.

05:57What can you do with profile?

05:59What can you do with profile?

06:01Energy efficiency matrix.

06:03Energy efficiency matrix.

06:05Energy star score.

06:07That's all.

06:09Optimized building design for energy efficiency.

06:11Optimized building design for energy efficiency.

06:13That's all.

06:15That's all.

06:17That's all.

06:19That's all.

06:21That's all.

06:23That's all.

06:25Learned and power.

06:27So that's all.

06:29What's the other thing for you to do?

06:31Okay.

06:33How do you do that?

06:35system selection and sizing as which is system drive what

06:38means. Conscious that key house ki sizing kya hai renewable energy

06:41system solar winds bagayra johai wo wo aap

06:45small kar hai hai, dousi energy small kar hai hai,

06:47bhoot sari defective hoti hai na, aap ki metal kar raha

06:49hoti hai, okay? How to make energy setting in Revit

06:54MMP? Open your Revit MMP model and go to analyze tab.

06:58Analyze tab ko ap jahat hara ismall karta hai, click on energy

07:01setting in the energy analysis panel. In the energy setting

07:04download box, select the building type and location. Choose

07:07the climate zone and weather data for your location. You can

07:10define the building orientation and layout. Define the

07:14activity system and equipment. Configure installation and

07:17glazing settings. You can click OK to save your energy setting.

07:22Run energy simulation for by clicking on energy analysis. Run

07:27energy simulation review. Analyze the energy simulation result

07:30optimize your building design. To optimize your building design.

07:33So, you sari instructions you dhe jah rhi hain. Steps

07:36بتai jah rhi hain. Kisena se

07:37aap johai energy ko ap ni small kaisa ga na, Revit ke

07:41inder johai ja ke. So, hum chelti hain Revit ke

07:44inder. Thaik hai, Revit ke inder. Ape a building ismall

07:46kya nidha rhi hain. Dekhi hain. Building nidha rhi hain.

07:48hai ת form. Hume yah jah harriarha prior part. Am?

07:49And this building ismall contains the model.

07:51And this building next building Sa interaction needs a

07:55cool punch, some environment. And it think this is

07:57theORY and this is the value as a inner-tie. What if our

08:00light�� me ismallies and it takes care of the

08:03view from where the inside

08:15get to. Here analytic properties are applied to analytic properties. In the heat transfer

08:21coefficients are applied to you factor. Here you factor factor. Here you factor factor

08:27is a look at the thermal resistance. This is a matter of resistance. This is a matter of

08:30how much of this. When the solar power goes up, it will be able to reduce energy

08:36power. This is a window or window. This is a way of behavior. This is a way of behavior

08:41and these things you can change. You can change here. Here you can edit type. Edit type

08:48here and here you can click here. So here in thermal, all of the parameters you can

08:54have. If you have proper calculations, concrete, casting, STO, Peripit, here you can change

09:04here. So material you can change. Material you can go to the energy, which is

09:13what is material and what is material you can do. So this is all of the

09:20materials. This is all of the materials. Now the materials are all of this material

09:26that you can change. So these materials are all of these materials that are

09:31material can be used to change the value of this material.

09:38If you have a green engineer, you can use the material to use the template to use the template.

09:48You can use the template to use the template to use the template.

09:52But it depends on how much material you can use.

09:58If you have a project material, you can have a slide.

10:04There are many materials that you can use.

10:07If you have a slide.

10:09If you have a energy coefficient, you can see that.

10:13But you can see here.

10:17You can see here.

10:19If you have a settings, you can make sure you do that.

10:25As you can see, you can see you can see here.

10:28I am going to edit time.

10:30I am going to edit time.

10:31So here you are.

10:34So here you are.

10:37So you have to show my requirements and design.

10:42So you can see here.

10:48we

10:51will

10:54know

10:55but

10:57so

11:04we

11:05are

11:13sari ki aap johai change kar sakti hai hata ki anndar wali wals ni hain unko unko bhi

11:17dhek sakti hain ki unko johai agar heat penetrate karthi anndar ati to anndar joh

11:23hota to hi aaj kal joha bhout sarhi joh building bunni hai jasai commercial high

11:28rise building bunni hai hoti hai us mein kiya hota ki bhout sarhi building hai

11:32minne dhekha ki jab building aap ki bunni rhi hoti diwar ke anndar insulation bhi

11:36rakhti hai taak ki insulation se aap ki joh energies hai woh penetrate na karhi

11:39anndar na hai, ٹھیک? کیونکہ hawa joh hota hai na hawa bada acha insulated

11:43hota iriske alawah packing material hota hai woh bhi aap anndar uske rakh sakti

11:48hain taakke joh heat hai woh aap ki penetrate na karay hai, ٹھیک? anndar na

11:51aya. Acha jab aap niye sara material jitna bhi iski sari joh hai energies

11:57begayar aap nukal hiya dhkhi ka dhrmazah aara, ٹھیک? aap dhrmazahe ko slet

12:00kar naiti hain, droway ko slet karke toh iske anndar isko ndi time me chalye

12:04jati hain, iske jahke dhekhti hain, iske anndar net property in dar koji properties

12:08hai ke nai hai, ٹھیک? toh first karay mein koji property yaha pere ndal

12:11djeta hain, toh, ٹھیک? aagal ye glass ke sath aar raha hai, ٹھیک? aagal ye glass

12:14ke sath aar raha hai, ٹھیک? aagal ke door a raha hai, toh glass wala slet kar

12:18lye hain, agar first karay, aap sarmjhe rhe hain, clear glass, koji glass,

12:22waga jitnke sare glass ki hain, ٹھیک? aagal ye glass ki hain, ٹھیک? aagal ye

12:24koji aapka or wood type hai, toh wood kar lye, toh iske joh aapko sari

12:28specification dhe dhega, ٹھیک? aagal ye glass ki sari specification hai,

12:32jitnay bhi doors hai, jitnay bhi material hai, minkadar aapne defined

12:36kar lye nye hai, ٹھیک? aagal define karne se aapke joh heat load calculation

12:39hooghi, woh bade e acci se nikala e ghi. aapke thermal energies hoonghe, woh bade bade

12:44bade bade ter tariqe se aapke johan calculate ho jayen. aagar farz karayi, aapke

12:49price range se building hain, aapne floors te hai, check karne hain, floors te nye

12:53jahe ko chanjiz karne hai, toh yaha cube ke dher chalye jayen, yaha cube ke dher jayengi,

12:56toh yaha pe aapke orien to view hara raha ghaa, yaha pe aapke paas joh hai flow

13:00of plans aare honga, flow of plans aap select karne, flow of plans ko select karne,

13:04thik hai, uske baad aapko first karay ground floor chahiyeh, ٹھیک? toh ground floor

13:08mo chalye jayen, toh aapko sara ground floor dikha dhega, ٹھیک? aapko sara ground floor

13:10dikha dhega, ٹھیک? aapko sara ground floor dikha dhega, ٹھیک? aapke baad

13:11isko tholda sa update ka lhe, ٹھیک? aapki dher wallo dhinkha, jitnny bhi

13:16čezen hiai, apke paas sara nazara anay šudhuo jayengi, ar omki johai, sabki johai

13:20abhiya dher walle hafinish, ter walle ko lhe rhe rhen, toh ispo jahake

13:23aap, joh thermal energy, thermal joh propertyness ki, woh bhi usko change katsake,

13:27analytic propertyness goola aake, yahaan se change kerke, usko inder bhi jahar

13:31saktii hain. To make sure kareyeng ke apki joh jitnay bhi material yaa jitnay bhi

13:36has a small

13:37product or everyday

13:38load coefficients

13:41already

13:42click to

13:43get

13:44out

13:44with

13:46properties

13:47or

13:49provide

13:49to

13:52provide

13:54do

13:54you

13:55can

13:56be

13:57Evet

13:59up

14:03I

14:04properties, thermo properties, which you have in your own system.

14:08which, which, which energy energy sources, heat load calculation, energy setting

14:13and you can use it.

14:16This is what you can use.

14:18You can use the analyzer to you can use location.

14:23If you have location, location, location, place, location, location.

14:26This is a markup of stone.

14:28This is a markup of stone.

14:30So, that's the default location and the location is that way.

14:34So, here, first, I have to go to Pakistan.

14:38I click on Pakistan and automatically, I can see that in Pakistan.

14:44It will come to Pakistan.

14:47I will go to Pakistan and Pakistan.

14:50I will go to Pakistan and Pakistan and Pakistan.

14:54This is the first question that I would like to mark it,

14:59I would like to give it to me in Lahore.

15:02This is the law keeper.

15:03This is automatically drivable.

15:05This is the source of this group.

15:09This is the climate energy system.

15:11This is the result of this data base.

15:15This data base is very effective and intelligent.

15:19This is the result of this data base.

15:22, so in terms of the slider, we can move them, so that it can be automatically

15:29, the energy is calculated and then the energy is calculated, then the model

15:37, it shows that here is the total weather weather, the weather is, cold, the weather is,

15:42the weather is, the weather is, when it comes to the air, when it comes to the air,

15:45the weather is, which is the energy energy, so all the energy is calculated.

15:50This is an energy calculation. Energy Plus software, Design Builder software, ISVE software, Revit Insight, Open Studio.

16:04This is a software available in the market. Energy Optimization and Energy calculation.

16:12Energy can be found in which you can calculate.

16:17In this case, you can also create spaces and zones.

16:24I remember that I had already created.

16:29In my previous exercise, I had to tell you how to create zones and spaces.

16:38It depends on how to create energy and energy.

16:43You have to check these things.

16:45You have to choose energy settings.

16:47You have to choose the model.

16:51You have to choose the settings.

16:53You have to choose the mode.

16:55Building elements.

16:57We'll look at it.

16:58We'll see what Building elements.

16:59Do you have to choose the mindset or base issues?

17:01Yeah.

17:02Topي flavor based fest 시ers,

17:03� которые Ihnen referrals,

17:04youtube и с스�ures,

17:05funk.

17:06mixed related.

17:07And so you can also егоисп либо существо узчик

17:08Do you need concepts and ideas?

17:09You can also extend theizeкуần.

17:10Both realizations and input.

17:11You have to choose the world as you can.

17:12Also some areas that you canакraise.

17:14asusirus, how can you help this country? You can help this country or do not work.

17:23Then, in other options, you can get everything. If you want to make further design,

17:30you will have a glazing wear, if you want to make it a glazing wear.

17:36shield, shield, shield, export complexities, which are the building envelope, which are

17:46the same. There are many things here, which are the building office type, where you can

17:53use building or patient schedule, which are the same, which are the same, which are

17:59And then, outside of the park, where you can see the whole tree of your room, This

18:06Town needs some information area, the entire system is located.

18:12The material is my practice book,

18:12I was thinking about there was a wall inside,

18:14and that door, I could tell you it here is the interior wall.

18:17There were parts of the house that have been connected to the file,

18:21and the material from the interior,

18:24and the interior wall might be the file,

18:26take a mass roof, okay?

18:28Energy energies, we have to get out of the room,

18:31the room from the room is being out of the room.

18:34Lures from the slab,

18:35how could it be?

18:36How could it be?

18:38How could it be,

18:40and how could it be the energy?

18:42How could it be built?

18:44How could it be built in the room?

18:46How could it be,

18:47the interior walls, ceiling.

18:49all the things that you can enter in settings and when you enter all the things that you can enter,

18:59then you can optimize and generate it.

19:03It is necessary that your analysis of your software, inside the plugin,

19:13All right, okay, I'll have to go.

19:17Okay, I'm gonna go.

19:21All right, okay.

19:22Okay, okay, okay.

19:24It's okay.

19:25Okay, okay.

19:27Okay, okay, okay.

19:30Okay, okay.

19:34Okay.

19:38Okay, okay.

19:43Yeah, I'm going to go to the spaces where you can go, and automatic places where you can click.

19:49So, you can create spaces.

19:51Spaces will create.

19:53First, if you can create spaces, you can create spaces.

19:57You can create spaces.

20:00You can create volume.

20:04If you want to create volume, then you can complete everything.

20:10So, this will be better for you to calculate your calculation.

20:15Otherwise, your calculation will not really be accurate.

20:17So, for you, the spaces and zones are located in the face.

20:22Enolies button here.

20:24So, then you can do area and volume.

20:26So, here you are going to create volume.

20:30So, you can click on these other values and again.

20:33So, the amount of problems are going to be used in this process.

20:37How does it be like that?

21:07we can analyze relation to this

21:09simulation

21:11and

21:13energy energy

21:15we can

21:17take

21:19last

21:21optimize

21:23we can

21:25take

21:27energy

21:29so

21:31energy setting

21:33and

21:35energy setting

21:37and

21:39on the

21:41building

21:43and

21:45windows

21:47and

21:49everything

21:51elements

21:53and

21:55atmosphere

21:57and

21:59the

22:01energy

22:03and

22:05the

22:07energy

22:09and

22:11the

22:13energy

22:15and

22:17energy

22:19and

22:21the

22:23energy

22:25and

22:27if

22:29you

22:31can

22:33you

22:35can

22:37you

22:39can

22:41you

22:43can

22:45you

22:47can

22:49you

22:51can

22:53you

22:55can

22:57you

22:59can

23:01you

23:03can

23:05learn

23:07do

23:09it

23:11so

23:13you

23:15do

23:17and

23:19you

23:26can

23:27you

23:29can

23:30do

23:31do

Revit MEP Energy Settings A Step-by-Step Guideریویٹ ایم ای پی میں توانائی کا تجزیہ کیسے بنایا جائے۔Part-45

Category

Transcript

Be the first to comment

Recommended