How to Reset Anker Power Bank _ Anker Power Bank Tips and Tricks 2026

HowToHarbor

Learn how to address common charging issues with your anker power bank. This guide shows you a simple process to reset your anker and resolve problems like rapid battery drain or unresponsiveness. Keep your external battery working smoothly with these troubleshooting steps.

Transcript

00:00Ladies and gentlemen, welcome to the channel. Today I'm going to show you how to reset your

00:04anchor power bank. All right, ladies and gentlemen, this process is very straightforward and simple.

00:10So let's get going. First of all, when should you consider resetting? Okay, so if you're having

00:17charging issues, if there's unusual heat coming from your power bank, and then if you have any

00:25battery problems, which would include a rapid battery drain or incorrect battery level indicators,

00:30and then a complete unresponsiveness. And this is expected with shutdowns or unresponsiveness,

00:37which will happen after long storage. A reset recalibrates the internal circuitry of the power

00:46bank, and it often resolves these issues without requiring a costly replacement. Having a look

00:53over here, your step-by-step reset process. First of all, you got to disconnect everything. So make

00:58sure that all of the cables and devices are removed, disconnected from your power bank, and then you need

01:04to create a loop. So you need to connect the power bank's micro USB input port to its USB output port

01:11using the original cable. This is very important. You need to use the original cable. You then need to

01:17wait and keep this connection for about 15 seconds. And then you need to go and watch for signals. All

01:24right, then the reset is complete when your LED lights will stop flashing. You then need to disconnect the

01:32cable and you need to restart the device. So remove it and power on the device. Make sure that it is then

01:39going to be plugged in and fully charged before you use the power bank again. And this will ensure proper

01:46calibration. I hope this was helpful.

Category

Transcript

Be the first to comment

Recommended