2004 HOT ROD Power Tour Day Six: Programming The Hog Video

We left the haunted mansion to meet Paul from Pauls High Performance at the Arlington Heights Racetrack to do a little tuning on the Mustang.

Transcript

00:00 Hi, I'm Paul from Poleside Performance over in Jackson, Michigan.

00:13 We're here on the '04 Hot Rod Power Tour.

00:16 We're in Chicago, Illinois.

00:18 We have the Fram Air Hog Mach 1 Mustang here, and we're going to be doing some real simple

00:23 modifications today.

00:24 And we're going to have a plenum spacer.

00:26 It raises the cover of the intake plenum about 3/8 of an inch.

00:30 Then we're going to be doing some custom programming.

00:33 We're talking about 10 to 15 horsepower at the rear wheel, and about 15 to 18 foot-pounds

00:37 of torque.

00:38 Okay, so now we're going to plug it in the OBD2 port for the tuner.

00:42 You heard it click on.

00:43 That means it's fired up.

00:56 And what we've done is put a custom file in here just specific for this Mach 1.

01:03 Okay, the tuning's in.

01:08 All complete.

01:09 Mods are done.

01:10 There we go.

01:11 Ready to lay rubber.

01:14 [BLANK_AUDIO]