0:01 mount the XB LED angel eye on an Iris shroud 0:05 cut some of the shroud for the wires of the angel eye 0:21 stick it with contact glue 0:34 heat the headlight in a box for about 10 minutes with a heatgun 0:45 open the headlight 1:02 don't forget the screw on the backside 1:29 remove the plastic cover inside for painting it black (if you want) 2:19 remove the original bulb holder and spring 2:34 place the rubber ring on the projector 2:39 place the H4 adapterplate in the housing 3:00 mount the projector with the screw nut 3:07 place the Iris shroud back on the projector and connect it on the positionlights 3:19 don't forget to clean the inside before closing the headlight 3:49 replace the plastic cover and heat the headlight for about 10 minutes again 4:57 check the looks
Link for the D2S twin kit: http://www.retrofitlab.com/projector-... Link for the Iris shroud: http://www.retrofitlab.com/projector-... Link for the XB LED Angel Eye: http://www.retrofitlab.com/accessoire...
Be the first to comment