http://www.WhiskeyRounders.com Here is ways to make completely clear ice balls in your home using a silicone ice ball mold and an Igloo cooler. If you purchased an ice ball maker and tried all the tips like filtered water, boiling water, double boiling water, distilled water etc and have yet to make completely clear ice spheres like you see in all the images online then this video is for you. So unless you have a costly clear ice block maker like the high end drinking establishments what are you to do? So you have to ask yourself are you prepared to take your home cocktail ice seriously? Because serious, isn't always easy. But it does come with serious benefits. Here is what you will require: Whiskey Rounders Six Ice Ball Mold (Amazon). Two Paint Stir Sticks or Thin Wood Stock 1/4 inch thick (Home Depot/Lowes/any Paint Shop). 9 qt. Igloo Cooler (Walmart/Target). Poultry Baster (Walmart/Target/or your Kitchen Drawer). 1. Use thin wood stock and cut to size and slide into grooves on Igloo cooler. 2. Fill cooler all the way with water. 3. Fill Whiskey Rounders Ice Ball Mold with water (filtered/bottled water works best) and submerge in cooler with all the water fill holes facing towards the top. 4. Now cover 3 water fill holes on one side of the mold with your fingers and carefully flip ice ball mold keeping the uncovered side immersed as you invert mold so all fill holes are now pointing down to the cooler bottom resting on the wood. Now eliminate excess water till it is just above the wood supports. Siphon excess water with poultry baster. 5. Put cooler in freezer for 24 hours. 6. Remove cooler from freezer let sit for five to ten minutes then place one hand inside cooler and flip cooler with other|hand. Block of ice inside cooler should slide out if not wait a few more minutes. 7. See how directional freezing works. Ice freezes directionally. All the tiny particles and…
Comments