00:00Presto Heat Sealer, Precision Temperature, Pressure and Dwell Time for Reliable Packaging Heat Seal
00:06A reliable heat seal is not created by temperature alone. It depends on the precise combination of temperature, pressure and
00:13dwell time.
00:14Introducing the Presto Heat Sealer, a laboratory system designed to help manufacturers develop, evaluate and optimize the sealing parameters.
00:21Machine Design and Safety
00:23Built for laboratory use, the tabletop design combines a compact footprint with a rigid sealing structure.
00:30The guarded sealing area provides an additional safety barrier around the heated jaw assembly with accessible test zone makes specimen
00:37position straightforward and controlled.
00:40Temperature Control and Calibration
00:42Temperature is one of the critical parameters in heat sealing.
00:46The system allows the operator to set the required sealing temperature and monitor the actual temperature during operation.
00:52For reliable laboratory testing, temperature should also be verified or calibrated against a suitable reference and defined intervals.
01:00In Presto Heat Sealer, the calibration certificates and the calibration is provided for the temperature, pressure and dwell time of
01:09these specific parameters.
01:11Pressure Control
01:12Controlled jaw pressure brings the sealing surface into intimate contact and helps maintain consistent contact across the seal area.
01:20Pressure should be appropriately set and periodically verified because the pressure applied to the specimen can differ from a machine
01:26input or nominal settings.
01:29Dwell Time Control
01:29The third critical parameter is a dwell time, the duration for which the material remains under the heat and pressure.
01:36Excessive dwell can unnecessarily increase the thermal exposure and cycle time.
01:40Temperature, pressure and dwell time interact, so changing one parameter can require adjustment of the others.
01:47Teflon Tape and Sealing Surface
01:49At the sealing interface, the jaw surface is another important consideration.
01:54The Teflon Tape layer provides the suitable non-stick contact surface for the sealing operation and helps prevent the packaging
02:00material from adhering directly to the heated jaw.
02:04Its condition should be inspected regularly and replaced when worn or damaged to maintain the consistent sealing conditions.
02:10Multiple Jaws and Sealing Configuration
02:13For different packaging structures and sealing requirements, the machine can be configured with multiple jaw arrangements, allowing laboratories to evaluate
02:21different sealing and configurations rather than being restricted to a single setup.
02:26The Real Customer Value
02:28And this is where the heat sealer becomes a process development tool.
02:31Instead of simply increasing temperature until a seal appears acceptable, the laboratory can systematically evaluate different combinations of temperature, pressure
02:40and dwell time.
02:41The goal is to identify a stable sealing window strong enough for the application without unnecessarily adding the thermal exposure
02:48to the sample.
02:49The scientifically stronger message is optimized within the material-specific sealing window rather than assuming the lowest possible temperature is
02:58always best.
02:58For more such information, you can contact Presto.