00:01Yes! I love it! Okay.
00:07Hi, I'm Chloe with Refinery29, and today on IDIY, we're going to make a simple yet chic tassel keychain.
00:13So let's get started.
00:14What you'll need are a pair of scissors, glue, a pen, tape measure, a piece of faux leather, and a
00:22keychain ring.
00:22For the first step, I'm going to take my piece of leather and turn it over on the backside.
00:26And I'm using an old skirt. You can use any type of leather or faux leather.
00:30And I'm going to take my measuring tape and measure out a piece that's ten inches long and three and
00:36a half inches wide.
00:38And just take my pen and mark it out first, and then cut the pieces out.
00:43Next, I'm going to cut a second piece that's about three inches long and a quarter of an inch wide.
00:49And this is going to be the loop that goes around the tassel.
00:52Next, you'll want to take the smaller piece of leather and loop it through the keychain ring.
00:57Take your glue and just dab a little bit and then press the two ends together.
01:02Then while that's drying, you can take your larger piece of leather and you'll want to mark out about one
01:08inch from the top.
01:10And I'm going to mark it all along and then draw a line.
01:13And then I'm going to start cutting up the fringe up until that point.
01:19Next, you want to take the keychain ring and then place it on the end.
01:23And get your glue and do a little dab right at the edge.
01:28And then we're just going to begin wrapping it and rolling it and gluing the piece every few turns.
01:37And now that it's dried, this is a great accessory for any bag or keychain for spring.
