# Title
**Layout from Drawing Details Using Leica Builder 405 | Urdu Tutorial**

# Description
Is practical surveying tutorial mein seekhein ke **Leica Builder 405 Total Station** ki madad se drawing details se site par layout kaise karte hain.

Is video mein construction drawing ko samajhne aur us mein di gayi dimensions aur reference points ki madad se site par required points set out karne ka practical tareeqa explain kiya gaya hai.

**Is video mein aap seekhenge:**
- Construction drawing details ko samajhna
- Drawing se required dimensions aur points identify karna
- Reference points aur baseline ka istemal
- Leica Builder 405 Total Station se site layout karna
- Drawing aur actual site position ko check karna
- Layout ke dauran common mistakes se bachna

Yeh tutorial land surveyors, civil engineers, site engineers aur surveying students ke liye useful hai jo drawing se practical setting out seekhna chahte hain.

Mazeed practical surveying tutorials ke liye **Daily Survey Gets** ko follow karein.

Follow: **@dailysurveygets**

#LeicaBuilder405 #DrawingDetails #LayoutSurveying #TotalStation #UrduTutorial #LandSurveying #SettingOut #DailySurveyGets
Transcript
00:00If we have to take advantage of the plan, then how will we do it, you will see it on this site.
00:09Look okay look at this so this is the line a dash a b like this okay like this d and
00:23D dash this is the line and after that if you see another site
00:29So these are the grades 1, 2, 3, 4, 5, 6, 7, 8 and so on.
00:37If we want to do it this way, then for layout single reference line we have to do it back side in setup and
00:49After that come to the application, again three options are given below in the application and further options are given below also.
00:57Are
00:58Ake plaque p list this is point list and here it is written more this more is written on it
01:09We press more and then you will go to layout, go to basic layout, if we want to apply curve.
01:21If yes, then you have to walk in the arc
01:22For a straight line, we have to do it in the line, okay, now here in this
01:29a line in the grid line a is given okay now go through it and to the end of this line
01:43coordinate as you go along, the last grid line is atara, okay, look at this, you can also look up
01:50yes
01:5318, 19 okay or 19 or 18 but the grid of 18 is given okay and here in front
02:02No, but the coordinates given to us are of this point, this is definitely
02:08The line is line A is 18, okay A is 18 point, so what to do is, you have the coordinates of this line.
02:19To be given in line option
02:22A, A1 and A18 okay these two coordinates when you give in first point and last point
02:30It is okay to give it and if there is any building work then it is okay to put corner points, we have one of them in this.
02:42is B21 and the other is
02:44GLBT B22 these are two points, okay GLB21 is the distance from here will be 0 and whatever distance is there on B2
02:57will be
02:58The total distance will be the final distance and similarly from this start point to the end point, looking at your right side
03:08Pe plus banega
03:10Offset and minus will be done, if you want to make it okay then you have to check it.
03:26So it has two actions, one is layout, after that you can add any point on your screen.
03:33You have to put it, okay, for example, you have to put it, okay
03:38We have to place point J1. What will be the length of line A and then what will be the offset.
03:53We will see the length of line A from the grid, grid number five, okay, grid number five, this is no longer five.
04:04then how many passes till grid number five
04:0875 75 75 If you add all of this, this will become your length, okay and
04:17The length is now fixed, how will you know the offset, if you look here on the side, it gives you this
04:26has happened
04:28It gives in milli, okay if you are seeing this then you should use this method to put this point.
04:34For
04:34You have to calculate the length and measure the opposite from here and give it to him on the calculator, then your point will be calculated.
04:43It will go well
04:44So the second layout is in the layout, you have to write the distance of the direct line, whatever is the distance of the line, this
04:54There are zero points of distance ahead from your first point and similarly on the right left
05:01Look at its offset as I write it down.
05:0642 Okay 42 and I'll write offset below 55 first make it zero when it's direct horizontal
05:19You made the angle zero, after that you put the rod on this side.
05:25When you zero it and range it, it's okay, now you have to shoot at it, it's okay and
05:39Then
05:42Earlier it was 38, now it was 28 meters 33, when you make this distance zero then your point will be scored.
05:51For that, if you have taken the center cross point, then when you have taken this center for example, you have taken this line
06:00If the offset is to be reduced by 30 meters, then if the offset is to be reduced by one meter in 30 meters, then one
06:06The meter will be placed from that center to here and to place the point again
06:09One meter more to do
06:11That is, 31 has to be applied
06:12So this will become a line mark for you.
06:15and similarly for Apset
06:18The offset has to be kept the same again
06:20which is 30-100
06:22and Lind has to be reduced by one meter
06:24And do it one meter more like this
06:26So this line of yours and this line will be crossed, which you can then select from the details.
06:34J1 is the same way you would have been given J1 in the drawing, this is X2 or the way
06:39There is also another one of drawing but I am telling it for the sake of understanding.
06:43So in this you have to see how far it is from the grid line, okay and the line
06:51How far behind it is and how far away it is from the grid line, after seeing this you can start drinking again.
06:59If you want to take it out then this was the method of taking it out, video
07:03If you liked it, please like, share and comment if you have any questions.
07:09You can thank me in the comments

Recommended