Skip to playerSkip to main content
**TITLE**

Coordinate Layout Using Leica Builder 405 Total Station | Setting Out Points

**DESCRIPTION**

Welcome to Daily Survey Gets!

In this practical land surveying tutorial, learn how to perform coordinate layout (setting out points) using the Leica Builder 405 Total Station.

Discover how to use known Easting, Northing, and elevation coordinates to locate design points on the ground for construction work.

📌 **Topics Covered:**
- Introduction to coordinate layout using Leica Builder 405
- Total station setup and orientation
- Entering or selecting setting-out coordinates
- Understanding Easting and Northing values
- Locating design points on the ground
- Guiding the prism holder to the required position
- Checking layout accuracy for construction work
- Practical surveying tips for site engineers and land surveyors

🎯 **What You Will Learn:**
By watching this video, you will understand the basic coordinate setting-out procedure and how to use the Leica Builder 405 to transfer design coordinates from a drawing or coordinate list onto the construction site.

This tutorial is useful for land surveyors, civil engineers, surveying students, and beginners who want to improve their practical total station skills.

Follow **Daily Survey Gets** for more tutorials on Leica, Sokkia, Topcon, GPS surveying, AutoCAD, leveling, and construction setting out.

**HASHTAGS**

#LeicaBuilder405 #CoordinateLayout #SettingOut #TotalStation #LandSurveying #CivilEngineering #SurveyingTutorial #DailySurveyGets

**TAGS / KEYWORDS**

Leica Builder 405, Leica Builder 405 tutorial, coordinate layout, coordinate setting out, setting out points, total station layout, Easting Northing coordinates, construction layout, total station coordinate method, Leica total station, land surveying tutorial, construction surveying, surveyor training, civil engineering, site setting out, Daily Survey Gets

**CATEGORY**

Education

Category

🤖
Tech
Transcript
00:00Two things we have to do is to code how to apply it, how to code it on 40 feet
00:10Today we will tell you the method of applying it, so first of all you have to come to the program, okay?
00:18Come to the program and here the eight option is replication, it is more and go to the site and do it on the back side.
00:27Neither is there a Rusty in its video nor is it uploaded before.
00:32and layout this way ingle distance tie caucus dooro se ko kar diyat liya leya kikir waya ko
00:40Take out and turn ok, now you can change the cursor at the first point in this.
00:51In this, your points which are saved with you will be visible, there is another way to escape it.
01:00by
01:15If you skim, you will come to the save point near you.
01:25Verify this I kick it now on the screen see the direction marked at the top of the screen below which
01:39Starting from these, it is of Disters, on the second number this is England, this is Bearing, it has to be made 00 directly.
01:47The horizontal one is English and the lower one is level
01:53If you do not want to show the level as per your wish then how to set this point right now
01:59You have to apply each F2 which I have named, you have to keep moving it, you have given this direct heirnal
02:08Make it 00, make it exactly 00
02:26How to make it 00 and put a short there, how to put a shot there on the prism
02:39So the distance will tell you how far forward and backward you want to go, I am saying 4 meters and 57 centimeters backward.
02:47telling me to go
02:49In the same way, he has to signal the person holding the prism to move back 4 meters.
02:55And if you straighten it again, you will short it.
03:20Okay, now it's saying 2 meters ahead.
03:23So you have to signal him in the same way that he has to move forward 2 meters and 57 centimeters.
03:35Now he is saying that he is four meters behind.
03:43Similarly, make it exactly 00 and your point will be added.
03:50Put your point and put a point and make it exactly 00
04:00Ajay has to be made absolutely 00
04:09Will go four will put your point
04:23Ajay has to be made absolutely 00
04:27Chua that up is not prism so I am doing it like that
04:30Darik is taking a shot
04:32just to explain
04:34It doesn't take that much time anyway
04:38I'm just doing this to show you
04:41Chua that there is a prism in front, not this one, I will take that Daric shot
04:45So Jidar too
05:00So this way he is 28 now.
05:03This needs to be made absolutely 00
05:09Then it is changing again because the place in front is not right.
05:12That is why it does not appear to be in the right place, it is not a prism.
05:15So just like that, make it 00.
05:18Similarly, if the level is also given then the level should also be
05:21This will be 00, your point will be exactly the same.
05:24So this was the way to coordinate.
05:26If you want to add more, then change it with the cursor here.
05:29And keep doing it in the same way
05:33This was the way to coordinate
05:36Total Station 405 Builder Daika Builder

Recommended