# Title
**Backsight Method on Leica Builder 405 Total Station | Urdu Hindi Tutorial**

# Description
In this practical land surveying tutorial, learn how to set up the **Leica Builder 405 Total Station using the Backsight Method**, explained in simple Urdu/Hindi.

Is video mein hum seekhenge ke Leica Builder 405 Total Station par backsight method kaise use karte hain aur instrument ko reference point ki madad se kaise orient karte hain.

**What You Will Learn / Is Video Mein Kya Seekhenge:**
- Leica Builder 405 Total Station ka setup
- Backsight point ka selection aur setup
- Instrument orientation using a reference point
- Backsight ke zariye direction set karna
- Construction site par practical surveying workflow
- Total station setup ke dauran common mistakes se bachna

Yeh tutorial land surveyors, civil engineers, surveying students aur beginners ke liye useful hai jo Leica Builder 405 Total Station ko practical site work mein use karna seekhna chahte hain.

**Daily Survey Gets** par Leica, Sokkia, Topcon Total Station, GPS Surveying, Leveling, Coordinate Layout aur Construction Surveying ke mazeed practical tutorials dekhein.

Follow us: **@dailysurveygets**

#LeicaBuilder405 #BacksightMethod #TotalStation #UrduHindiTutorial #LandSurveying #SurveyingTutorial #DailySurveyGets

Category

🤖
Tech
Transcript
00:00Okay, today I want to discuss the method of back site, some people had commented that back
00:07If we look at the site method using the standard method of Lyca Builder 405, then basically there is no need for it because
00:18All work with rescission
00:21It is done, okay, so for this, first of all we will apply the level option, then we will have the point below
00:32For this, whatever razor is there, it will come and at the point where this point is, so at this point we
00:40Shunting has to be done when this level reaches
00:45Gang and centrifugal as well as the razor below, both will be set right after that
00:52In this you will come in the program, after coming in the program, set up the coordinate in the setup.
00:59and then and non-station and
01:02To down station, OK the tick, after that if you want to write the height instrument then write meter.
01:11If you want to write the height from the tape till here then you can write it, otherwise this is the direction if you want to write it then it is fine.
01:19If not, then write more Radab, I will write Ror 1.4
01:26And if we do 5 or 1 then we will do this 1 and 1 then right now it is tzmint
01:37Now you can subscribe to our Fortress subscribe points
01:49If we write it down and then we will have the correct answer.
01:56Click on Neev PT, now write the coordinate here, Bachas Chaun Saat Saatis
02:05Sharia no. 32 and 2785 zero 242 Sharia five satriyata this is the coordinate of this station point
02:20If you want to write the level of 'Ke Kar Diya' then you can also write it as 'Ke Kar Diya'.
02:29That's done with the data, you have to make a subjoin, so you have to put Lab French below and in this now
02:37I have it saved on the back side and this is the toon number point.
02:58Zero zero country zero and two this is the point, I selected it and did ok and on the back side it was ok
03:14Before doing this, set it on Prism.
03:16That if we set it on a prism then we will be kind to it, this is it
03:25Then again, we have the back side, which is fine, this was the way to do the back side, Laika Belder.
03:34405 402 same same okay

Recommended