00:00My dear friends, we have something here from Lost Vape: the Telema Elite DM 45.
00:08It has a really cool design, and we're going to unpack it now.
00:21However, the information only shows mesh 45 watt power.
00:281500 milliamperes plus courage mtl dtl, so you can of course switch it however you want.
00:41He wants to adjust the settings. What do we have inside? We have the Telema Elite DM 45 device inside.
00:52Once we had an E Plus Courage DM with 0.3 on top, three milliliters, then 0.6 to three milliliters, then we had
01:02We included a quick guide from E-Plus Courage, a user manual, an O-ring, a lanyard, and a Type C cable.
01:09With the charging cable and warranty card, can we now open the whole thing?
01:26And now, first of all, let's go in here, we all have the Lene and the O-ring.
01:34We have a USB to USB-C charging cable, and on one side we have the 0.3 ohm resistor.
01:48Here we have some information with instructions, everything we will need.
02:05Will it also be mentioned somewhere where German will eventually be introduced back then?
02:13In this area, you naturally need some information, and ultimately, the whole thing...
02:22Here we have the information card which explains what dual mesh is and what it isn't.
02:27Dual mesh is what it looks like with eco or boost; you have all the information.
02:35We're also doing pretty well in terms of performance.
02:47And then we had the device itself; I was really looking forward to it.
02:56because, of course, when you look at the device
03:02It's known from an anime series, and the whole thing is really nicely written on it, Apex.
03:14Torneo, and for those who don't know what this design is about, it's about the Corolla.
03:22Toyota AE 86 Apex Tourneo Edition, awesome car!
03:32Yes, you wrote Toyota AE 86, but it's actually a Corolla, it's the sport version.
03:42It was actually the Toyota Corolla AE 86, not the Corolla.
03:49I'm a huge fan of this car, I love it, I'd love to import one myself.
03:57It looks really cool, I have to say, it's something special. Now, let's take care of the bot first.
04:08or logically activate it
04:14We already know the pots
04:19three milliliter volume dual mesh
04:32They taste absolutely fantastic!
04:42And with dual mesh, you can also see that there are three ports down here.
04:52One of them is the negative point, the others are the positive points; it's about whether one now
04:58Has one side been cheered on, or the other, or is it dual-chequenched? But if, for example, only one side is cheered on...
05:03And when the people have naturally gone through with it, then you can switch over like that and then...
05:10Of course, he uses the other side; you can really see the connections nicely inside here.
05:17We also have a really great airflow here.
05:25It's really nice and big here for adjusting things.
05:33It's really great!
05:41Then we turn on the whole device.
05:51Here we have, above left, the battery level; below left, we have the resistance (ohms); in the middle, we have the resistance (ohms).
06:02We have the wattage in the upper right corner, the length of the draw, and in the lower right corner, the wattage.
06:10How many puffs one has, we have here on the front of the USB port, that means we have an airflow display.
06:18and USB on one side
06:26The power button is on the side; the overall dimensions are 36 mm x 18 mm x 103 mm.
06:39and we have a net weight of 76 plus or minus 5 grams.
06:46Of course, 5 grams depends on the pot; we have a power range of 5 volts here.
06:56watts up to 45 watts
07:02Resistance range 0.25 ohms to 2 ohms; we have a charging voltage of 5 volts and 1.4 amps, and it is supported.
07:12all of this with a charger
07:14From 5 volts 2 amps we have an OLED display with 0.69 inches and it is a zinc alloy with
07:28PU leather
07:39Press once to turn on the display, press twice to switch modes. I'll just see if...
07:49the pot is already finished
07:52Yes, the pot is finished. It displays 1 2 single 1 2 dual, but nothing is shown there. However, it shows one here.
08:03d an
08:07Okay, if I press it again now, it should be an "s", yes, there it is.
08:12So, if there's an 's' in that area, let's assume it's single.
08:17If it's in dual mesh mode, but the wattage adjustment is then three times higher, then it's set to three times higher.
08:29Clicking to lock is the same as clicking on a company icon; it turns on and off after five clicks.
08:34So we've got everything from one to five clicks, which I think is really great.
08:45So we have something else that might be interesting with all this.
08:54Of course, we have a safety protection check here, ammo white, the cartridge is not recognized.
09:01The cartridge has a short circuit (low battery). Now I can automatically interrupt it because the resistance is too low.
09:11Steam time exceeded; at eight seconds the OVA displays 8s and "too hot" if that's the case with the internal circuit board.
09:21exceeds 60 degrees
09:31That's basically all there is to the device now.
09:37Let's take a general look now, and look at those air holes down there and the whole area around the battery.
09:44But when I look at it, it's really a great design, I have to say.
09:49They really did a great job with the vaping in general.
09:52I also think the paintwork is really cool, it's a really beautiful metallic white, it's really
09:58What
09:59and since the red is still a metallic red, tending towards matte
10:07You can really feel the Japanese fonts there.
10:11The lettering is really nicely written on it, lost babe ae 86
10:26Is it even possible to get above 60 degrees?
10:31Heat – it's about the heat, for example, if you often leave the thing standing in the sun.
10:36it warms up
10:40For example, it's about the heating of the whole thing itself.
10:50On the other hand, it's also really beautiful; you can feel all the writing there.
10:56really well done
11:00I really like it, it's a really, really nice device.
11:07That's really it, that's it, I can't do anything about it, I can't say anything against it, so that's really right.
11:13Well done!
11:17Then we'll take a look now, because we have a fire button, but we also have automatic draw control purely through steaming.
11:31not
11:44Okay, the automatic train control, if you're at 10 watts like I am right now, we're currently at 1.
11:50,2 above
11:53Because we have to set that up; we have a dual coil inside, which means if we use one coil
12:01From the dual mesh coil, and if it's the 0.6 ohm one, then you have 1.2 ohms at the top.
12:09If you switch to dual, you have 0.6.
12:17And with the 0.3 ohm coil, if you have dual mesh, then you have 0.3 ohms.
12:23you the single coil
12:24If you use one coil, then you have 0.6 ohms.
12:40Then you have 0.6 ohms.
12:54So, automatic train control, if you set it up correctly, is really good.
13:03fire button mode
13:07It looks good too.
13:09There's nothing to be said against it.
13:12I really like the automatic airflow control, or the airflow in general; it's also a bit bigger.
13:17You really get more airflow this time than with others.
13:22So you can see that the airflow is really big.
13:26I can take a look.
13:29how much size we actually have in terms of airflow
13:35That brings us to 5.4 to 3, so it's a really nice, large airflow, so you can...
13:44It's really good to use, and also great for the 0.3s.
13:48because it is said that one wants to use 0.3, which is really suitable
14:00But the device is really pleasant to use; it's also really comfortable to handle.
14:05They feel really nice and comfortable in the hand.
14:12The flavor really comes through well with the coil.
14:22and the design is simply
14:25I think that's so cool!
14:28I think that's so cool!
14:30hammer
14:31Absolutely fantastic!
14:32full 까요
14:34I
Kommentare