00:00So, here we have the Blazeboro IO Mod Box from Thunderhead Creations, who collaborated with the YouTuber Mike Vapes.
00:15has become.
00:16As you can see here, we're going to enjoy opening the packaging.
00:25It's red.
00:32Then you have such a nice pull tab down here, and it's a USA design.
00:39Okay, now let's get to the point.
00:43The world is going to hell in a handbasket, you could say.
00:48Now let's just take the whole device out here.
00:52And I'll show you everything else too, because it's obviously important.
01:01So, we have a few more things down there, of course.
01:07So, here we have a Joinsy pointing device.
01:11So here we have some important information that you don't really need.
01:17So here we have the information about the whole thing.
01:24And here we already have some information about the box itself.
01:28Here we have a height of 85 millimeters, a width of 50.5 millimeters and a thickness of 23
01:38Millimeter.
01:40Here we have a material, aluminum, aluminum.
01:45I don't know why it's spelled "zoppelt".
01:48Aluminum is aluminum.
01:50It doesn't matter anyway.
01:51We have an import voltage of 3.2 volts to 4.2 volts here.
01:57We have an output voltage of 0.5 volts to 9 volts.
02:02Watt-voltage range is 5 watts to 88 watts.
02:07TC range is 100 degrees to 315 degrees or 200F to 600F.
02:20The resistance range is 0.08 ohms to 3.15 ohms.
02:25That's quite a statement.
02:27We have a charging voltage of 5 volts, 2.5 amps.
02:32One battery is a single 18650 battery.
02:35You also need to bring in external experts.
02:37And a USB Type-C charging cable.
02:41So.
02:44Competence.
02:44We have one here for opening the battery.
02:48Can we get ourselves out of here?
02:50Then battery slave.
02:52It can be replaced.
02:53Then we have a 510 trip-trip connector, an adapter, and a sliding panel.
03:01Then, of course, you have some information here about assembly and other things.
03:14Then you can add.
03:16Then you can tighten it.
03:18Then you can do it again.
03:19But what do we do in cases where that's not the case right now?
03:25So I'm really wondering about that right now.
03:28Why that's being shown there.
03:30Because it's rotatable.
03:32But things are different here.
03:34Then.
03:35Buttons can of course be changed.
03:36We have a normal button on here.
03:40We can of course change that in that area as well.
03:42We will do that too.
03:46Here is some information.
03:50As you can see.
03:54We will of course do all of that.
03:59Now let's take a look at the device itself.
04:01I've already extracted a better version of it here.
04:04Then the whole thing.
04:04Here we have the whole beautiful device.
04:09Then you can pull out.
04:11Then you can include the borosilicate system.
04:15And closed again.
04:16Magnetic.
04:18That's awesome.
04:19Here we have the 15-pointer.
04:24And once to do it up and down.
04:31This is Maria.
04:32I didn't just climb into any old place.
04:35But of course, there.
04:37This plate is needed for that.
04:41We also have some spare parts with us, of course.
04:45We have one here.
04:48A sextant.
04:50We have another rubber band here.
04:51For the button.
04:53For replacement rubber parts.
04:55I'm really wondering where the spare rubber parts belong.
05:02We need one.
05:03Otherwise, I'm not going to pull any rubber in that direction right now.
05:10So.
05:13Then we'll replace the button here.
05:19Red ketchup.
05:21Yes, you could say that.
05:26I don't know.
05:27Is it actually possible to modify them using DNA?
05:30We'll see that now, once we've opened here.
05:34We want to be very interested.
05:35The USB-C port is down here.
05:39It is protected.
05:50Yes, it looks like it.
05:52It could probably be changed if one wanted to.
05:56If the display is broken, I see now that it's soldered in place.
06:00So.
06:01Then you can simply replace the button.
06:06So.
06:08Then it simply comes down to this again.
06:11And then you screw it back on.
06:13And then, for example, you have a different button.
06:15He's on it right now.
06:17The other one only goes outwards.
06:20But I quite like the flames.
06:23And they fit, too.
06:25And then there's the thing with the red.
06:27That's a beautiful metallic red.
06:33Yes, because of you.
06:38You started with ketchup.
06:41You started with Zempf.
06:43Yes.
06:45But that's through a proverb.
06:49Add to Zempf.
06:52So.
06:54So.
06:57Then.
06:58We'll see how to access the battery compartment.
07:01Just pull it over once.
07:02It's already open.
07:04Can you put the battery in?
07:05Remove the battery.
07:07And.
07:07As far as I know.
07:08I don't even know how to get it out.
07:11Uh.
07:11I think we need that again.
07:16Uh.
07:17That's why it says so on it.
07:19You only screw it outwards.
07:21Now I understand.
07:24So.
07:26Is the ring out?
07:28And we can modify the slave.
07:33However you want it.
07:35However, I find it very interesting that something else is screwed in at the bottom as well.
07:41Because I'm already working on it.
07:44I don't know what that is.
07:46But no.
07:46I don't want to take it apart.
07:48I can try putting in a different slave.
07:51But I want to.
07:53As you can see.
07:56Keep the carbon look.
07:58Because I like it quite a lot.
08:01Now we're turning everything back around.
08:06Now we're turning everything back around.
08:09Three hours later.
08:27Dress lightly, people.
08:29Not fixed.
08:29Otherwise she'll ruin everything.
08:31So.
08:34I'm going to put a battery in now.
08:37Which brings me to my question.
08:39How does that go in there?
08:48Is there anything written down here?
08:52No.
08:53There's nothing there.
08:55Am I reading something in there?
08:57No.
08:58I'm not reading anything here.
09:04But.
09:04Only inwards.
09:05And downwards.
09:06Minus upwards.
09:08That should be correct.
09:09And yes.
09:10That's true.
09:11And it's already switched on.
09:14Determination of the day.
09:15The battery is almost empty.
09:20Good.
09:21That you have enough batteries.
09:30Battery fully charged.
09:31It says "No" on it.
09:32There's nothing inside.
09:35And you can do that pretty well, for example.
09:38Screw it back on.
09:44And then we have the 15.
09:45And that's on top of everything else.
09:51And then we put the drill in.
09:55And then testing takes place.
09:57So, my dear friends.
09:59We now have the V-Wesel from Venniwape inside.
10:05The ready-made leg of lamb.
10:09Naturally.
10:10If one were to say now.
10:12Of course, one wants to install it.
10:13You can turn it up a bit down here.
10:15That it is compatible.
10:17And screw it in place.
10:20Then close the whole thing up.
10:24Then it works.
10:250.67 ohms.
10:27It has a resistance of 0.6 ohms.
10:29We have just set it to 28 watts.
10:32That's all there is to it.
10:34So.
10:37Let's see.
10:38We're going 1, 2, 3 now.
10:40Then you're in the menu.
10:42Power, temperature, bypass, volts, and puffs.
10:46And back.
10:47That's all there is to it.
10:49We have power.
10:50We can set it to Normal, Strong, or Soft.
10:54We have Temp.
10:55This is the temperature setting for nickel, titanium, stainless steel or TCR.
11:01We have the bypass.
11:03The ones you can adjust.
11:04We can create voltage.
11:060.5 to 9 volt setting.
11:08And Puff is then the resetting of the Puffs.
11:13They will of course be displayed.
11:15Somewhere or something.
11:17I can't see it right now.
11:18Except that it says something like "No Drop" as usual.
11:24There's really nothing more to explain.
11:26Except if I go into the menu a little bit.
11:28And I'll just go for bypass surgery now.
11:34I do that automatically.
11:384.10 volts.
11:431, 2, 3.
11:46Temperature is of course a setting for Nickel, Silent Steels, Titanium, TCR.
11:51The Back.
11:53Power, Normal, Soft or Strong.
11:58And then back again.
11:59Then we'll switch to normal.
12:03And you can see puffs from...
12:06Age.
12:07That's a six-figure number.
12:08Seven brothels.
12:09I think that's all you can look at.
12:12And if you keep pressing the Plus button on the counter for a longer time, it resets it.
12:17OK.
12:19So, we've become a little bit wiser now.
12:23I like the design.
12:24There's a serial number down there too.
12:2655793.
12:28As you can see.
12:29I noticed that there's a serial number on it.
12:35It just takes some getting used to having the power button there.
12:44But...
12:45It works.
12:47I can't say anything about the airflow, because it's obviously interchangeable via the Bohre-Io-Ferticoiler.
12:58But when I press it, it turns on immediately.
13:06It's a battery box, meaning there's no automatic pull mechanism.
13:11We can of course replace the button here.
13:15Maybe even make one yourself.
13:17We can also replace the battery slave at the back here.
13:23Of course, you have a backup and so on.
13:27Very easy to set up.
13:29Bottom USB-C port with high-speed charging.
13:33You can replace the 5-10 if you want a different one.
13:41Replacing the battery is also quite easy; just pull it over.
13:44Then it was gone.
13:45Then you can remove the battery.
13:47It is not...
13:48What I don't like is that there's no label with plus and minus.
13:53Gifty, thanks for the visit and welcome to the Vapor Testers, where everything revolves around vaping.
13:58As I said, but normally the plus side is at the bottom.
14:02Because the negative terminal is always directly on the casing.
14:11What else can I say? It's a beautiful system.
14:13It's a bit heavy, but that's normal for a battery carrier.
14:17I like it.
14:23Nice system.
14:24I really have to say that.
14:25A really nice system.
14:35And there it is again.
14:49It's something.
14:51Really ngh 소f focus.
14:53Craziness.
14:54A real component.
14:54Really.
14:55Really.
14:55Really - normal.
14:55Really-
