Automatic Sprinkler Pipe Layout in Revit MEPریوٹ ایم ای پی میں خودکار چھڑکنے والی پائپ لے آؤٹPart-69

Learn how to create an automatic sprinkler pipe layout in Revit MEP with this step-by-step guide! 🚀💧

In this tutorial, we'll cover:

🔹 Creating a fire protection system in Revit MEP
🔹 Setting up system settings and pipe layouts
🔹 Placing sprinklers and running automatic pipe routing
🔹 Adjusting and refining the pipe layout

Save time and increase accuracy with Revit MEP's automatic pipe routing tools! 💡

👍 Don't forget to like, comment, and subscribe for more Revit MEP tutorials!

#RevitMEP #SprinklerSystem #PipeRouting #FireProtection #MEPDesign #RevitTutorial #BIM #Autodesk #MEP #Design #Automation"**

Keywords: Revit MEP, Sprinkler System, Pipe Routing, Fire Protection, MEP Design, BIM, Autodesk, Revit Tutorial, Automation

Transcript

00:00Assalamualaikum warahmatullahi wabarakatuh.

00:28Assalamualaikum warahmatullahi wabarakatuh.

00:58Assalamualaikum warahmatullahi wabarakatuh.

01:00Assalamualaikum warahmatullahi wabarakatuh.

01:02Assalamualaikum warahmatullahi wabarakatuh.

01:04Assalamualaikum warahmatullahi wabarakatuh.

01:06Assalamualaikum warahmatullahi wabarakatuh.

01:08है कि हम जो स्प्रिंकलर्स ले उट है आटमेटिक के जो आपशन है रेविट के इंदर उसको हम क्यों इसमाल करते हैं उसको ड्रॉआ करने के लिए ठीक है सबसे पहले

01:18जो है चीज़ होती है कि वह टाइम सेविंग होती है आटमेटिक के आटमेटिक के साथ आप्शन आपके बहुत जबहुत जब करते ती है ठीक है तो यह जरूरी नहीं होता कि आटमेटिक

01:41option when you have a routing or a network that you have to design or you have to design

01:48in order to create a manual work. That's why you have to say that fifty to sixty percent

01:58of your automatic routing work and thirty to forty percent of your manual work. That's

02:08why you have a routing. The two-man unit is alright. The two-man unit is correct. It's

02:13correct. That's it and the two-man unit is correct. That's it, that you have to

02:17know the structure of your automatic relay. Therefore, that's why that's why we need

02:21more of these connections. There is no network correctly. The network is correct,

02:27the system is correct and the system has to be locked. The two-man unit used to

02:30established bhi ki gae hai aur unki sizing bhi sahih hai taakke errors ko reduce kiya

02:36jasa ki. Uski wajah ji hoti hai ki aapke joh pipe network apa bantai na Revit ke

02:42indera uske indera analysis bhi hoti hai aapke, thik hai? To aapka koi bhi joh connection

02:47hai, woh toota hoa nahi hoana chahi hai. Three, consistency. The software maintain

02:53consistency in pipe layout and annotation, thik hai? Or pipe layout ke indera

02:58and notation manual ki consistency ko bhi bhaal rakti hai. Chyotha hai easy

03:04modification, thik hai, aap zahir hai, aapne jab network bina laya to aapke

03:08liye baut asan hoota hai, specially agar aapne place order binaya to aapke

03:12chingji joh hai, baut asan hootai, aram se aap chingji joh hai, woh kar sakti

03:16hai, tub tuk, jub tuk, aap detail design ko create nii kare lietai, ya double line

03:20up create nii kare lietai. How to draw a splinkler pipe layout automatically with

03:24Revit MEP. Revit MEP me aapki sara se automatic layout joh hai, woh

03:28generate kerti hai. Create a fire protection system. Sibse pahle

03:31aapko fire protection system create karna hota hai, banana hota hai,

03:34yaa aapke baus already hai, usko istamal karna, aapne istamal karke

03:38aur joh hai, us rungka aapne system ke mtabak aapne aapne aapne a

03:43design karna hai. Do define system setting, pir aapne system ke

03:47setting under koon se aapke sizes hoonge, koon se fitting hoonge, koon

03:50sa material hooga, woh bhi aapne define karna hai. Revit MEP. Revit MEP. Revit MEP.

03:54Phras, pir aapne sprinkler ko place karna. Yad rakhye sprinkler ko place

03:57aap pehle hi kar lietai hai, kaih jaha pae jab aapki ceiling layout

04:00ho rhae horti hai, usko sprinkler aapne place kar dihi hai,

04:03to pyr piping layout asaan ho jati hi, kaih?

04:05Chottha hai run pipe routing go to the system tab and pick run pipe routing

04:11to automate the pipe routing, kaih?

04:13Phros ke baad aapki joa routing hai na, woh aap final kar lietai

04:16automatically, okay? You can do it automatically, okay? You can do it automatically, okay?

04:19But if you don't like it, then you can change it, okay? Let's say that you can do it

04:25with a routing, but you can do it with a problem. So, you can do it with a point

04:30that you can do it. Adjust and refine. You can do it with a network, okay?

04:36Then you can do it with a routing routing routing. MEP automatically route by based on

04:43the system setting and sprinkler location, ठीक है. Automat के पाईप रूटिंग में

04:48यह होता है कि उसके अंदर options क्या-क्या होती है.

04:51कि आपकर जो route होती है, pipe होती है, system होती है,

04:54shifting होती है, सारी exactly अपनी सही location के मताब बुज़ओ

04:58So that's what we have to do.

05:00The other one is Pipe Rooting Preferences.

05:02There are preferences that you have to do with size

05:06or material preferences.

05:08The other one is Pipe Layout Rules.

05:12Create Rules to Control Pipe Rooting.

05:15You can create rules that you have to do with your routing.

05:19That's what you have to do with your routing.

05:21That's what you have to do with your routing.

05:24So these were some of the instructions.

05:30The Rewit Speakers Pipe Layout.

05:35So you can get the Rewit Layout.

05:38Now I'm going to do the Rewit.

05:42We will see how you can establish a network.

05:46I remember the Rewit corridor.

05:48I remember that I had my tutorial.

05:51Thank you very much.

06:21Thank you very much.

09:17so here is the center of the area. So here we will have to take the upper or lower.

09:22But depending on the above or the gap, then there is no gap. So this is what you can change.

09:28Now, we have to select this network, and then you can select the elevation.

09:38If you need to change the elevation, if you need to change the elevation, then we will change the elevation of the area.

09:42so

09:44so

09:46so

09:48so

09:50so

09:52so

09:54so

09:56so

10:10convert placeholder automatically pipe network change

10:14ho jayega pita ke chab aap baar na dhubara jaake na section boss ke

10:18anzar sabko aapne check bhi ka lena hai ki wo automatically joh hai

10:22aapke automatic option se wo placeholder me joh hai wo change hua

10:26hai uske anzar ke nahi change ho ga thikai fine kiya aapne

10:28wujye dhekheye dhekheye aapka change nii hua to aapne bari bari

10:32sare joh hai na unko change karede nai thikai inko sabko placeholder

10:36se uske anzar double line ke anzar aapne jake change karede nai thikai

10:40yahan pe aapke paas elevation bhi aa raha hata hai thikai elevation ko bhi

10:44aapne isamal kar saktay hai thikai first grade aap elevation isamal

10:47karhenge tib bhi joh aapko joh aapke sprinklers aapko nazer

10:52aah rhe honga thikai yahan pe dousera joh dousera side pe agar

10:56aapne koi binaaya hoa hai thikai section line binaayi huya thikai yahan pe

11:00dhekhen ka first grade yahan pe section line aapne mark ki hai isko

11:04yahan pe isko yahan pe isko yahan tekl lhe nate hi

11:10here tuk nazer ae , or yahan teak yahan tak iyi sara nazer ae

11:13thikai to yahan pe ismoi chale jane ismoi jahake ios me bhi

11:16abdeh sakti hain or isko jahake sabko aap convert k DAsakte game

11:20ji jo placeholder , jitne bhi placeholder saba sabil ko aap convert k DAske

11:25in double line. If you convert in double line, you can see that automatically your whole

11:35connection will establish. Look at that connection. The main line with the sprinkler connection

11:41establishes. This is a core line, hydronic line. FCU. So you can pick up and pick up

11:51and pick it up, please place, here we can see. You can see all your actions. You can

12:01check all your connections. You can see all the place orders. When you are

12:08making money, you can also convert all the places to you. When you have a section of

12:14the place, it will很多. You have to convert all the place orders. Use all the

12:18So we can convert it.

12:20So we can convert it.

12:21We can convert it.

12:23Now I will tell you a little more about the options.

12:27First we can use this to undo the options.

12:32We can use these options.

12:35We can use this option.

12:41And then we can use this option.

12:44going on, so we need to get to the perimeter, so we have our options with this option here.

12:49Then we go here, if I go here in the cell department, we just need to give it up.

12:53Then we need to give it a little as well, I need to give it a little as well as we

12:57go here and then we will show it the other option.

13:00Then we also have to get to have a table shape.

13:02we can do the changes here, right?

13:07So, look, here, here, here, here, here, here, here, here, here, here, here.

13:11So, when we create, okay, here, we can do it again,

13:15so, we will make a layout, okay?

13:20If I look at this section box,

13:23we will take it a little further, okay?

13:25And then we will turn it down, okay?

13:27So, we will see that this way,

13:29we will make a network here, okay?

13:32So you have a line here.

13:35You can go down here.

13:38So you can generate it.

13:40Then you can convert it.

13:43Convert it. Convert it. Convert it.

13:45You can have problems.

13:47Then you can check it.

13:51So you can check it.

13:52So you can get it.

13:53Then you can select it.

13:56Select it.

13:57Select it.

13:59Convert it.

14:32this is the sprinkler network and if you have to change the parameters or edit type

14:42and you can change the material and then you can change it. If you change it, then

14:50you can change the color and then you can change it. If you change it, then you can

14:56segment sizes, that you can change, that you can modify it in the inside of your system.

15:09If you want to make a system, you can make a system, you can make a fire protection system.

15:16If you want to make a system, you can change your system.

15:21families are there.

15:25Families are there.

15:27Here are systems.

15:29Here are sprinklers.

15:33Sprinklers.

15:35Sprinklers are there.

15:37And over the top.

15:41Pipe systems.

15:47Here are pipe systems.

15:51Here are pipe systems.

15:53Here are right click.

15:55Type properties.

15:57Type properties.

15:59Material.

16:01Material.

16:03Use.

16:05Material.

16:07Material.

16:09Material.

16:11Material.

16:13Appearance.

16:15Change.

16:17directly.

16:19Going back.

16:21The material.

16:23Local.

16:25For the other.

16:27The material.

16:29material.

16:31People can do everything.

16:33People cannot do it.

16:35You can do it.

16:37You can see it.

16:39I'm going to go to the system.

16:44So, if I'm going to go to the system, then I will go to the system.

16:52I also will look to the system.

16:58So, this is the system.

17:00So, I will look at the system.

17:03Okay?

17:04Okay.

17:05So this is a couple of instructions.

17:10Okay, sir.

17:12Okay.

17:13So, this looks like a single device.

17:17This is a single device okay?

17:22Okay.

17:23Okay?

17:24So, this is a single device.

17:28Yeah, that's it.

17:58The network is completely different.

18:04Then you can modify the modifications.

18:10If you change the pipe, you can change the diameter.

18:14If you change the elevation, you can change the elevation.

18:18If you change the elevation, you can change the diameter.

18:22if you change the Calendar to its route, you can change the improvements.

18:28If you learn the vertical axis,-there are different things you can change.

18:34If there is a different regime of replace, you can improve the €1000 descriptions of the Matterport & events.

18:45Then you can enable it to distribute yourárias features and click on the summary button.

18:51If you're here, you'll get the pipe, then you'll get the pipe.

19:07Drop pipe, you'll get the pipe.

19:12Now, if you want to do this, you can do this as well as you can do this.

19:19Now, if you want to extend it, then you can extend it.

19:26Now, if you want to extend it, then you can extend it.

19:37So, if you want to extend it, then you can do it.

19:46If you want to expand your users, then you can do it.

19:52If you want to expand your users, then you can move your users.

19:57included.

19:59Right?

20:01Medicaid.

20:03We have to connect it with a new line.

20:07We can manage this.

20:09We will connect it with this.

20:15Here, it's a pipe.

20:17It's a pipe.

20:19Jab up pipe.

20:21We connect it with this function.

20:23Now, it's a pipe.

20:25Is get all this code.

20:30Is all this code.

20:33Is all this code.

20:40Is all this code.

20:45Is it okay?

20:46the water supply, the water supply, the main line, the main line, it can connect with it.

20:55So, this way, you can use the layout of the spring.

20:59It's very easy. It's not a problem.

21:02If you have a section line, basically, you can show everything.

21:06So, this is the way you can edit it.

21:09So, section line is very easy.

21:13I have a connection here.

21:16So, here I have a connection.

21:18So, we have a union.

21:19They are just signed.

21:21So, we have to go and change it.

21:24We have to check that there is no problem.

21:29If you have a side change, then automatically do it.

21:35If you need to change the size, automatically you can add a reducer.

21:41If you have a reducer, you can add a reducer.

21:48Totally depends on how you have routing,

21:52what you want to do.

21:55What you want to develop, what you want to do.

21:59If you want to change the standard,

22:11then you will change the standard.

22:17Then you will change the standard.

22:22connection to step touch.

22:24And here it is that if you have a problem,

22:28you can get it,

22:30then you can erase it.

22:32Then you can get it,

22:34then you can fill it,

22:36then you can fill it,

22:38then you can fill it automatically.

22:40If you have any connection,

22:42you can get it.

22:44So you can go and go and go and look at the window,

22:48and then you can look at the window

22:50and see how it is established.

22:52Here it is,

22:54where the connection is coming from.

22:56Okay?

22:58Then you can see it.

23:00You can see it.

23:02Slow,

23:04the pipe is coming from.

23:06So all the things you need to do is check your mind.

23:10So,

23:12if you have any connection to your mind,

23:14then you can check your mind.

23:16If you have any connection to your mind,

23:18if you have any connection to your mind,

23:20then you can go here.

23:22Crates similar.

23:24Crates similar.

23:26You can see it.

23:28You can see it.

23:30You can see it.

23:32You can see it.

23:34You can see it.

23:36You can see it.

23:38And then,

23:40it is over time.

23:42You can see it.

23:43You can see it.

23:44You can see it.

23:45And,

23:46you can see it.

23:47You can see it,

23:48that you can see it and you can see it,

23:49we move on.

23:50But then,

23:51you have to keep it.

23:52connection.

23:53So, if the other connection is not done, then all the connections will be established

23:59to not be done.

24:00If there is a problem, if there is a problem, then the analysis will be easily left.

24:13So, this was the exercise of the sprinkles.

24:20I'll tell you about the sprinter.

24:25I'll tell you about the topic.

24:30I'll tell you about the tutorial.

24:35Please share your videos.

24:39Please share your videos.

24:41And so that everyone our job gets better at our businesses

24:57Thanks so much

24:57GO TO GARY

Automatic Sprinkler Pipe Layout in Revit MEPریوٹ ایم ای پی میں خودکار چھڑکنے والی پائپ لے آؤٹPart-69

Category

Transcript

Be the first to comment

Recommended